Repository navigation
Releases
Konfigurator VAULT 1.1.43
What's new in 1.1.43 (EN)
USSA pegboard accessories
- Support for the separate USSA pack
261020_PEGBOARD_USSA.rar(included in the "commercial" download): unpack it into your library folder (aPEGBOARDfolder appears) and scan the library again. - Pegboard accessories… button – under Extra files and in the set editor next to the pegboard – opens a panel on the right (like Settings), so it works with the left column collapsed too.
- Ready sets: workshop starter, screwdrivers and pliers, small parts, cables and tapes, wrenches and bits – with a list of parts and thumbnails of every part with quantities; also in the tower wizard (Extras step).
- One by one: hooks A–I (20–100 mm), containers, trays and plates (4 depths × 5 widths, optionally with 2 container hooks), 37 mm holders – with a 3D preview and dimensions.
- On the parts list they get their own Pegboard accessories group with a size description; hook G adds an M3 bolt to Non-printed.
- The fit on the pegboard is not print-tested yet – feedback welcome.
New texts in DE/FR/ES/ZH were translated without a native-speaker check – corrections welcome.
Co nowego w 1.1.43 (PL)
Akcesoria pegboardu USSA
- Obsługa osobnej paczki USSA
261020_PEGBOARD_USSA.rar(jest w pobieraniu „commercial”): rozpakuj ją do folderu biblioteki (powstanie folderPEGBOARD) i zeskanuj bibliotekę ponownie. - Przycisk Akcesoria pegboardu… – pod „Dodatkowymi plikami” i w edytorze zestawu przy pegboardzie – otwiera panel z prawej (jak Ustawienia), więc działa też przy zwiniętej lewej kolumnie.
- Gotowe zestawy: warsztat na początek, śrubokręty i szczypce, drobne części, kable i taśmy, klucze i bity – z listą zawartości i miniaturami wszystkich części z liczbą sztuk; także w kreatorze wieży (krok „Dodatki”).
- Pojedynczo: haczyki A–I (20–100 mm), pojemniki, tace i płytki (4 głębokości × 5 szerokości, opcjonalnie z 2 haczykami do pojemnika), uchwyty 37 mm – z podglądem 3D i wymiarami.
- Na liście części własna grupa „Akcesoria pegboardu” z opisem rozmiaru; haczyk G dodaje śrubę M3 do „Niedrukowanych”.
- Dopasowanie do pegboardu nie jest jeszcze sprawdzone wydrukiem – uwagi mile widziane.
VAULT storage tower configurator (USSA Design) – STL file list, print estimate, 3MF plates, 3D view.
/ Konfigurator wież z pojemników VAULT (USSA Design) – lista plików STL, szacunek druku, płyty 3MF, wizualizacja 3D.
Installation (Windows): download install.bat and run it. It checks Python (offers to install it with winget),
downloads the program, installs numpy, creates a desktop shortcut and starts the configurator.
The VAULT STL files are sold by USSA Design: https://www.ussadesign.com/pages/vault – the program asks for their folder.
The program language can be switched in Settings (top right): automatic / English / Deutsch / Français / Español / 中文 / Polski.
Instalacja (Windows): pobierz instaluj.bat (instalator po polsku) i uruchom go. Instalator sprawdzi Pythona (w razie
braku zaproponuje instalację przez winget), pobierze program, zainstaluje numpy, utworzy skrót na pulpicie i uruchomi
konfigurator. Pliki STL VAULT kupisz u producenta: https://www.ussadesign.com/pages/vault – program poprosi o ich folder.
macOS / Linux: download install.sh and run it in Terminal: bash install.sh (or as one command:
curl -fsSL https://github.com/rawel2/Vault-Konfigurator-wydania/releases/latest/download/install.sh | bash).
Messages in English or Polish depending on the system language. Later start: the shortcut or run.sh.
/ Pobierz install.sh i uruchom w Terminalu: bash install.sh (albo jednym poleceniem jak wyżej).
Update: the “New version available” bar in the program, or run install.bat again (settings are kept).
/ Aktualizacja: pasek „Dostępna nowa wersja” w programie albo ponowne uruchomienie instaluj.bat (ustawienia zostają).
Manual / Instrukcja: VAULT_manual_EN.pdf, VAULT_instrukcja_PL.pdf.
Program authors / Autorzy programu: rawel2, Claude (Anthropic). VAULT, design and STL files / projekt i pliki STL © USSA Design.
Unofficial tool, not affiliated with USSA Design. / Program nieoficjalny, niepowiązany z USSA Design.
Shared with the permission of USSA Design (10/2026). / Udostępniane za zgodą USSA Design (10.2026).
Program licence / Licencja programu: MIT (excluding USSA Design materials / bez materiałów USSA Design – NOTICE.md).
Source / kod: ab7932c
Konfigurator VAULT 1.1.42
What's new in 1.1.42 (EN)
Drawer boxes with the gridfinity baseplate in the floor
- New drawer insert gridfinity in the box floor (one part) (S, M, L): the configurator turns the USSA box from your library into one part with the baseplate merged into the floor and openings in the floor under every pocket – less filament, no separate baseplate. Bins sit as on a baseplate; the bin layouts and the 3D view work as before.
- Settings → drawer boxes without pin holes (when no dividers) – the divider pin holes in the floor are filled for drawers without Grid Dividers.
- The 3D view now places the USSA baseplate (and the bins on it) in the slot of the box front wall – before it sat about 4 mm too far back.
H3C hotends
- Hotend bins and the S-drawer hotend insert have a new slot type H3C (“+ H3C”), measured from a holder model: the slot follows its shape closely (nozzle tube, heater, tapered end, shelf and steps at the top). An S4 insert holds 8 H3C hotends. Not yet checked by printing.
Labels
- Raised labels with text in another colour: in a Bambu Studio project the filament change to the text colour is already set at the first text layer (checked in Bambu Studio on H2D). Such labels go on their own plates. In other slicers – set it by hand as before.
Safer installation and update
- The update from the program checks the SHA-256 checksums of the installer and the program package against the release (a wrong or missing checksum stops the update). Works for updates from 1.1.42 on.
- Python packages are installed within tested major versions (numpy, manifold3d, fonttools).
Other
- A note that parts made from USSA files (labels with text, facades with a logo, modified boxes, repaired meshes) are for personal use only – as agreed with USSA Design.
- A new set gets a free name number (no two “Set 2”); Colour by click is offered only where shapes from STL files are shown.
- Server change – after the update the program restarts on its own.
New texts in DE/FR/ES/ZH were translated without a native-speaker check – corrections welcome.
Co nowego w 1.1.42 (PL)
Pudełka szuflad z płytą gridfinity w dnie
- Nowy wkład szuflady gridfinity w dnie pudełka (jedna część) (S, M, L): konfigurator robi z pudełka USSA z Twojej biblioteki jedną część z płytą wtopioną w dno i otworami w dnie pod każdą kieszenią – mniej filamentu, bez osobnej płyty. Pojemniki stoją jak na płycie; układy pojemników i okno 3D działają jak dotąd.
- Ustawienia → pudełka szuflad bez otworów na piny (gdy bez przegródek) – w szufladach bez przegródek Grid Dividers otwory na piny w dnie są zalane.
- Okno 3D stawia płytę USSA (i pojemniki na niej) w szczelinie przedniej ścianki pudełka – wcześniej stała ok. 4 mm za daleko z tyłu.
Głowice H3C
- Pojemniki na głowice i wkład na głowice w szufladzie S mają nowy rodzaj gniazda H3C („+ H3C”), zmierzony ze wzoru uchwytu: gniazdo wiernie odwzorowuje kształt (rurka, grzałka, stożkowy koniec, półka i stopnie na górze). Wkład S4 mieści 8 głowic H3C. Wydrukiem jeszcze niesprawdzone.
Etykiety
- Etykiety wypukłe z napisem w innym kolorze: w projekcie Bambu Studio zmiana filamentu na kolor napisu jest wpisana sama na pierwszej warstwie napisu (sprawdzone w Bambu Studio na H2D). Takie etykiety trafiają na osobne płyty. W innych slicerach – ręcznie jak dotąd.
Bezpieczniejsza instalacja i aktualizacja
- Aktualizacja z programu sprawdza sumy SHA-256 instalatora i paczki programu z wydaniem (zła albo brakująca suma przerywa aktualizację). Działa przy aktualizacjach od 1.1.42.
- Pakiety Pythona instalowane w sprawdzonych głównych wersjach (numpy, manifold3d, fonttools).
Inne
- Dopisek, że części tworzone z plików USSA (etykiety z napisem, fronty z logo, zmienione pudełka, naprawione siatki) są tylko na własny użytek – zgodnie z ustaleniem z USSA Design.
- Nowy zestaw dostaje wolny numer nazwy (bez dwóch „Zestaw 2”); Kolor kliknięciem tylko tam, gdzie są kształty z plików STL.
- Zmiana w serwerze – po aktualizacji program uruchamia się ponownie sam.
VAULT storage tower configurator (USSA Design) – STL file list, print estimate, 3MF plates, 3D view.
/ Konfigurator wież z pojemników VAULT (USSA Design) – lista plików STL, szacunek druku, płyty 3MF, wizualizacja 3D.
Installation (Windows): download install.bat and run it. It checks Python (offers to install it with winget),
downloads the program, installs numpy, creates a desktop shortcut and starts the configurator.
The VAULT STL files are sold by USSA Design: https://www.ussadesign.com/pages/vault – the program asks for their folder.
The program language can be switched in Settings (top right): automatic / English / Deutsch / Français / Español / 中文 / Polski.
Instalacja (Windows): pobierz instaluj.bat (instalator po polsku) i uruchom go. Instalator sprawdzi Pythona (w razie
braku zaproponuje instalację przez winget), pobierze program, zainstaluje numpy, utworzy skrót na pulpicie i uruchomi
konfigurator. Pliki STL VAULT kupisz u producenta: https://www.ussadesign.com/pages/vault – program poprosi o ich folder.
macOS / Linux: download install.sh and run it in Terminal: bash install.sh (or as one command:
curl -fsSL https://github.com/rawel2/Vault-Konfigurator-wydania/releases/latest/download/install.sh | bash).
Messages in English or Polish depending on the system language. Later start: the shortcut or run.sh.
/ Pobierz install.sh i uruchom w Terminalu: bash install.sh (albo jednym poleceniem jak wyżej).
Update: the “New version available” bar in the program, or run install.bat again (settings are kept).
/ Aktualizacja: pasek „Dostępna nowa wersja” w programie albo ponowne uruchomienie instaluj.bat (ustawienia zostają).
Manual / Instrukcja: VAULT_manual_EN.pdf, VAULT_instrukcja_PL.pdf.
Program authors / Autorzy programu: rawel2, Claude (Anthropic). VAULT, design and STL files / projekt i pliki STL © USSA Design.
Unofficial tool, not affiliated with USSA Design. / Program nieoficjalny, niepowiązany z USSA Design.
Shared with the permission of USSA Design (10/2026). / Udostępniane za zgodą USSA Design (10.2026).
Program licence / Licencja programu: MIT (excluding USSA Design materials / bez materiałów USSA Design – NOTICE.md).
Source / kod: 081aa6e
Konfigurator VAULT 1.1.41
What's new in 1.1.41 (EN)
The tower wizard now guides you all the way
- After Create and continue the wizard does not close – it goes on with the real project: Colours (ready palettes made of Bambu Lab filaments, or no colours), Extras (labels from the project with a text field for every facade, blank labels on or off, logo on the facades, links to the bin and divider tabs), Printer (printer, 3MF plates or one Bambu Studio project, STL copies), Print (prints, time, filament, Prepare for printing with progress and the result folder) and Assembly.
- The wizard asks about the key (normal or hidden, and whether to print the hidden key once per project).
- Templates with a gridfinity baseplate and with a Bambu Lab hotend insert; a one-time note about the wizard for existing users.
Selected set or whole project
- With several sets there is a switch above the tabs: Tabs show: / Whole project. By default parts lists, estimate, CSV, print preparation, bins, dividers, labels and assembly apply to the set selected on the left; Whole project combines all sets, e.g. into one print job. Part colours, the printed counter and the common logo size stay shared by the project.
3D window
- Colour by clicking a part – the whole group gets the colour, optionally also for printing.
- Next to editor – the 3D view as a panel in place of the result column, updated live while you edit; a second click closes it. Both buttons (3D view, Next to editor) are under the tower preview.
- Photo – a soft-shadow render for saving as PNG. Tyres black by default.
- Bambu Lab filament colours – part colours chosen from the filament line, as in Bambu Studio.
Hotend bins
- Each slot (number, type, text, ✕) on one line; Does not fit appears immediately and also in Project notes (also for the hotend insert in an S drawer).
Other
- The New version available bar shows the change list in the program language. Release notes now start in English.
- Server change – after the update the program restarts on its own.
New texts in DE/FR/ES/ZH were translated without a native-speaker check – corrections welcome.
Co nowego w 1.1.41 (PL)
Kreator wieży prowadzi przez cały proces
- Po Utwórz i dalej kreator się nie zamyka – prowadzi dalej na prawdziwym projekcie: Kolory (gotowe palety z filamentów Bambu Lab albo bez kolorów), Dodatki (etykiety z projektu z polem na napis każdego frontu, puste etykiety, logo na frontach, odnośniki do pojemników i przegródek), Drukarka (drukarka, płyty 3MF albo jeden projekt Bambu Studio, kopie STL), Wydruk (wydruki, czas, filament, Przygotuj do druku z postępem i folderem wyniku) i Składanie.
- Kreator pyta o kluczyk (zwykły albo ukryty i czy drukować klucz – jeden na projekt).
- Szablony z płytą gridfinity i z wkładem na głowice Bambu Lab; jednorazowy komunikat o kreatorze dla dotychczasowych użytkowników.
Wybrany zestaw albo cały projekt
- Przy kilku zestawach nad zakładkami przełącznik Zakładki pokazują: / Cały projekt. Domyślnie listy części, szacunek, CSV, przygotowanie wydruku, pojemniki, przegródki, etykiety i składanie dotyczą zestawu zaznaczonego po lewej; Cały projekt łączy wszystkie zestawy, np. w jedno zlecenie druku. Kolory części, licznik wydrukowanych i wspólny rozmiar logo zostają dla całego projektu.
Okno 3D
- Kolor kliknięciem w część – kolor dostaje cała grupa, opcjonalnie też do wydruku.
- Obok edytora – widok 3D jako panel w miejscu kolumny wyniku, zmienia się na bieżąco przy edycji; ponowne kliknięcie zamyka. Oba przyciski (Wizualizacja 3D, Obok edytora) są pod podglądem wieży.
- Zdjęcie – render z miękkimi cieniami do zapisania jako PNG. Opony domyślnie czarne.
- Kolory filamentów Bambu Lab – kolory części wybierane z linii filamentów, jak w Bambu Studio.
Pojemniki na głowice
- Każde gniazdo (numer, rodzaj, napis, ✕) w jednej linii; komunikat Nie mieści się pojawia się od razu i w Uwagach do projektu (też dla wkładu na głowice w szufladzie S).
Inne
- Pasek Dostępna nowa wersja pokazuje listę zmian w języku programu. Notatki wydań zaczynają się teraz od angielskiego.
- Zmiana w serwerze – po aktualizacji program uruchamia się ponownie sam.
VAULT storage tower configurator (USSA Design) – STL file list, print estimate, 3MF plates, 3D view.
/ Konfigurator wież z pojemników VAULT (USSA Design) – lista plików STL, szacunek druku, płyty 3MF, wizualizacja 3D.
Installation (Windows): download install.bat and run it. It checks Python (offers to install it with winget),
downloads the program, installs numpy, creates a desktop shortcut and starts the configurator.
The VAULT STL files are sold by USSA Design: https://www.ussadesign.com/pages/vault – the program asks for their folder.
The program language can be switched in Settings (top right): automatic / English / Deutsch / Français / Español / 中文 / Polski.
Instalacja (Windows): pobierz instaluj.bat (instalator po polsku) i uruchom go. Instalator sprawdzi Pythona (w razie
braku zaproponuje instalację przez winget), pobierze program, zainstaluje numpy, utworzy skrót na pulpicie i uruchomi
konfigurator. Pliki STL VAULT kupisz u producenta: https://www.ussadesign.com/pages/vault – program poprosi o ich folder.
macOS / Linux: download install.sh and run it in Terminal: bash install.sh (or as one command:
curl -fsSL https://github.com/rawel2/Vault-Konfigurator-wydania/releases/latest/download/install.sh | bash).
Messages in English or Polish depending on the system language. Later start: the shortcut or run.sh.
/ Pobierz install.sh i uruchom w Terminalu: bash install.sh (albo jednym poleceniem jak wyżej).
Update: the “New version available” bar in the program, or run install.bat again (settings are kept).
/ Aktualizacja: pasek „Dostępna nowa wersja” w programie albo ponowne uruchomienie instaluj.bat (ustawienia zostają).
Manual / Instrukcja: VAULT_manual_EN.pdf, VAULT_instrukcja_PL.pdf.
Program authors / Autorzy programu: rawel2, Claude (Anthropic). VAULT, design and STL files / projekt i pliki STL © USSA Design.
Unofficial tool, not affiliated with USSA Design. / Program nieoficjalny, niepowiązany z USSA Design.
Shared with the permission of USSA Design (10/2026). / Udostępniane za zgodą USSA Design (10.2026).
Program licence / Licencja programu: MIT (excluding USSA Design materials / bez materiałów USSA Design – NOTICE.md).
Source / kod: 4766283
Konfigurator VAULT 1.1.40
Co nowego w 1.1.40 (PL)
Poprawka: napisy przy gniazdach na głowice
- W 1.1.39 przy wpisywaniu napisu gniazda (np. rozmiaru dyszy) kursor wychodził z pola po każdej literze – w edytorze zestawu (wkład na głowice w szufladzie S) i w zakładce „Pojemniki gridfinity”. Teraz zostaje w polu.
Zmiana tylko w przeglądarce – po aktualizacji wystarczy przeładować stronę.
What's new in 1.1.40 (EN)
Fix: labels at the hotend slots
- In 1.1.39, while typing a slot label (e.g. the nozzle size) the cursor left the field after every letter – in the stack editor (hotend insert in an S drawer) and in the "Gridfinity bins" tab. It now stays in the field.
Browser-only change – after the update just reload the page.
Konfigurator wież z pojemników VAULT (USSA Design) – lista plików STL, szacunek druku, płyty 3MF, wizualizacja 3D.
Instalacja (Windows): pobierz instaluj.bat i uruchom go. Instalator sprawdzi Pythona (w razie braku zaproponuje
instalację przez winget), pobierze program, zainstaluje numpy, utworzy skrót na pulpicie i uruchomi konfigurator.
Pliki STL VAULT kupisz u producenta: https://www.ussadesign.com/pages/vault – program poprosi o ich folder.
Installation (Windows): download install.bat (English installer) and run it. It checks Python (offers to install
it with winget), downloads the program, installs numpy, creates a desktop shortcut and starts the configurator.
The VAULT STL files are sold by USSA Design: https://www.ussadesign.com/pages/vault – the program asks for their folder.
The program language can be switched in Settings (top right): automatic / Polski / English / Deutsch / Français / Español / 中文.
macOS / Linux: pobierz install.sh i uruchom w Terminalu: bash install.sh (albo jednym poleceniem:
curl -fsSL https://github.com/rawel2/Vault-Konfigurator-wydania/releases/latest/download/install.sh | bash).
Komunikaty po polsku albo po angielsku według języka systemu. Start później: skrót albo run.sh.
/ Download install.sh and run it in Terminal: bash install.sh (or the one-liner above).
Aktualizacja: uruchom instaluj.bat ponownie (ustawienia zostają). / Update: run install.bat again (settings are kept).
Instrukcja / Manual: VAULT_instrukcja_PL.pdf, VAULT_manual_EN.pdf.
Autorzy programu / Program authors: rawel2, Claude (Anthropic). VAULT, projekt i pliki STL / design and STL files © USSA Design.
Program nieoficjalny, niepowiązany z USSA Design. / Unofficial tool, not affiliated with USSA Design.
Udostępniane za zgodą USSA Design (10.2026). / Shared with the permission of USSA Design (10/2026).
Licencja programu / Program licence: MIT (bez materiałów USSA Design / excluding USSA Design materials – NOTICE.md).
Kod / source: c5b57ed
Konfigurator VAULT 1.1.39
Co nowego w 1.1.39 (PL)
Pojemniki na głowice Bambu Lab (zakładka „Pojemniki gridfinity”)
- Wybrany pojemnik → „rodzaj: na głowice Bambu Lab”. Gniazda na głowice standardowe (H2D, H2S, P2S, X2D) i indukcyjne (H2C), każde z napisem przed czubkiem (np. rozmiar dyszy – wpuszczony w drugim kolorze albo wklęsły), do tego gniazda na skarpety silikonowe.
- Głowica leży czubkiem do przodu i wystaje ok. 7 mm, łatwo ją chwycić. Wymiary gniazd sprawdzone wydrukami próbnymi.
- Pojemnik 3 × 2 kratki (4 jednostki – do szuflady 1F) mieści 6 standardowych albo 7 indukcyjnych; czego nie da się zmieścić, formularz pokazuje.
Wkład na głowice na całe pudełko szuflady S
- W edytorze zestawu: „Wkład: wkład na głowice Bambu Lab” (zamiast płyty gridfinity), lista gniazd pod przyciskiem ✎. S4 mieści 12 standardowych albo 14 indukcyjnych.
- Wkład jest na liście części, w widoku 3D (na dnie wysuniętej szuflady) i w zakładce „Składanie”.
Słupki w dnie szuflady (zakładka „Przegródki”, „Rysuj: słupek”)
- Słupki w otworach dna na 1 pin (okrągła podstawa 3 mm), 4 albo 5 pinów (podstawa 7 mm z krótkimi pinami), Ø 8, 12 albo 16 mm, wysokości pełnej szuflady 1F, 2F albo 4F. Sprawdzone wydrukiem.
Skrzynki a tył wieży
- Zawiasy skrzynki wystają z tyłu, a wieko odchyla się do tyłu, dlatego kręgosłup (z nim pegboard i uchwyt stały) jest tylko na warstwach szuflad pod pierwszą skrzynką, a uchwyt wysuwany i ścienny – tylko w wieży bez skrzynek (zmierzone w plikach). Pola w edytorze i kreatorze są wtedy wyszarzone, zapisany wybór czeka, wpis w „Uwagach do projektu”.
Wersja online – podgląd konfiguratora bez instalacji: https://rawel2.github.io/Vault-Konfigurator-wydania/ (bez plików STL, generowania części i przygotowania wydruku).
Po aktualizacji serwer uruchamia się ponownie sam. Nowe teksty w DE/FR/ES/ZH – tłumaczenia bez sprawdzenia przez native speakera, poprawki mile widziane.
What's new in 1.1.39 (EN)
Bambu Lab hotend bins (tab "Gridfinity bins")
- Selected bin → "type: for Bambu Lab hotends". Slots for standard (H2D, H2S, P2S, X2D) and induction (H2C) hotends, each with a label in front of the nozzle (e.g. the nozzle size – inlaid in a second colour or engraved), plus slots for silicone socks.
- The hotend lies nozzle-forward and sticks out about 7 mm, easy to grab. Slot sizes checked with test prints.
- A 3 × 2 cell bin (4 units – fits a 1F drawer) holds 6 standard or 7 induction hotends; the form shows what does not fit.
Hotend insert for a whole S drawer box
- In the stack editor: "Insert: Bambu Lab hotend insert" (instead of a gridfinity baseplate), with the slot list under the ✎ button. An S4 holds 12 standard or 14 induction hotends.
- The insert is in the parts list, in the 3D view (on the floor of the open drawer) and in the "Assembly" tab.
Posts in the drawer floor (tab "Dividers", "Draw: post")
- Posts in the floor holes on 1 pin (round 3 mm base), 4 or 5 pins (7 mm base with short pins), Ø 8, 12 or 16 mm, the full height of a 1F, 2F or 4F drawer. Checked by printing.
Sustainers and the back of the tower
- Sustainer hinges stick out at the back and the lid tilts backwards, so the backbone (and with it the pegboard and the stationary handle) is only on drawer layers below the first sustainer, and the pull-out handle and wall mounts only in towers without sustainers (measured in the files). The fields in the editor and the wizard are greyed out, a saved choice waits, and there is a note in "Project notes".
Online version – a preview of the configurator without installing: https://rawel2.github.io/Vault-Konfigurator-wydania/ (no STL files, generated parts or print preparation).
After the update the server restarts on its own. New texts in DE/FR/ES/ZH were translated without a native-speaker check – corrections welcome.
Konfigurator wież z pojemników VAULT (USSA Design) – lista plików STL, szacunek druku, płyty 3MF, wizualizacja 3D.
Instalacja (Windows): pobierz instaluj.bat i uruchom go. Instalator sprawdzi Pythona (w razie braku zaproponuje
instalację przez winget), pobierze program, zainstaluje numpy, utworzy skrót na pulpicie i uruchomi konfigurator.
Pliki STL VAULT kupisz u producenta: https://www.ussadesign.com/pages/vault – program poprosi o ich folder.
Installation (Windows): download install.bat (English installer) and run it. It checks Python (offers to install
it with winget), downloads the program, installs numpy, creates a desktop shortcut and starts the configurator.
The VAULT STL files are sold by USSA Design: https://www.ussadesign.com/pages/vault – the program asks for their folder.
The program language can be switched in Settings (top right): automatic / Polski / English / Deutsch / Français / Español / 中文.
macOS / Linux: pobierz install.sh i uruchom w Terminalu: bash install.sh (albo jednym poleceniem:
curl -fsSL https://github.com/rawel2/Vault-Konfigurator-wydania/releases/latest/download/install.sh | bash).
Komunikaty po polsku albo po angielsku według języka systemu. Start później: skrót albo run.sh.
/ Download install.sh and run it in Terminal: bash install.sh (or the one-liner above).
Aktualizacja: uruchom instaluj.bat ponownie (ustawienia zostają). / Update: run install.bat again (settings are kept).
Instrukcja / Manual: VAULT_instrukcja_PL.pdf, VAULT_manual_EN.pdf.
Autorzy programu / Program authors: rawel2, Claude (Anthropic). VAULT, projekt i pliki STL / design and STL files © USSA Design.
Program nieoficjalny, niepowiązany z USSA Design. / Unofficial tool, not affiliated with USSA Design.
Udostępniane za zgodą USSA Design (10.2026). / Shared with the permission of USSA Design (10/2026).
Licencja programu / Program licence: MIT (bez materiałów USSA Design / excluding USSA Design materials – NOTICE.md).
Kod / source: 38d29fb
Konfigurator VAULT 1.1.38
Co nowego w 1.1.38 (PL)
Poprawka: logo na frontach z oryginalną biblioteką USSA
- Z oryginalną paczką plików USSA (bez naprawy siatek) logo „nie mieściło się na frontach projektu” – każde, także ikona czy krótki napis. Przyczyna: fronty szuflad S1F, M1F, L1F i skrzynki XL1F mają w paczce błędy siatki i program widział je jako puste.
- Teraz taki front program naprawia sam – raz, w tle, tą samą metodą co narzędzie
napraw_stl– i zapamiętuje naprawioną kopię. W tym czasie panel logo pokazuje „Naprawiam fronty z błędami siatki…”. M1F, L1F i XL1F – kilka sekund, szuflada S1F – kilka minut (na NAS-ie do kilkunastu). Następnym razem bez czekania. - Z biblioteką naprawioną wcześniej (
napraw_stl) nic się nie zmienia.
Po aktualizacji serwer uruchamia się ponownie sam. Nowe teksty w DE/FR/ES/ZH – tłumaczenia bez sprawdzenia przez native speakera, poprawki mile widziane.
What's new in 1.1.38 (EN)
Fix: logo on the fronts with the original USSA library
- With the original USSA file package (meshes not repaired) the logo "did not fit on the project's fronts" – any logo, even an icon or a short text. Cause: the S1F, M1F and L1F drawer fronts and the XL1F sustainer front have mesh errors in the package, so the program saw them as empty.
- Now the program repairs such a front itself – once, in the background, with the same method as the
repair_stltool – and keeps the repaired copy. Meanwhile the logo panel shows "Repairing fronts with mesh errors…". M1F, L1F and XL1F take a few seconds, the S1F drawer a few minutes (up to 15 on a NAS). Next time there is no wait. - With a library repaired earlier (
repair_stl) nothing changes.
After the update the server restarts on its own. New texts in DE/FR/ES/ZH were translated without a native-speaker check – corrections welcome.
Konfigurator wież z pojemników VAULT (USSA Design) – lista plików STL, szacunek druku, płyty 3MF, wizualizacja 3D.
Instalacja (Windows): pobierz instaluj.bat i uruchom go. Instalator sprawdzi Pythona (w razie braku zaproponuje
instalację przez winget), pobierze program, zainstaluje numpy, utworzy skrót na pulpicie i uruchomi konfigurator.
Pliki STL VAULT kupisz u producenta: https://www.ussadesign.com/pages/vault – program poprosi o ich folder.
Installation (Windows): download install.bat (English installer) and run it. It checks Python (offers to install
it with winget), downloads the program, installs numpy, creates a desktop shortcut and starts the configurator.
The VAULT STL files are sold by USSA Design: https://www.ussadesign.com/pages/vault – the program asks for their folder.
The program language can be switched in Settings (top right): automatic / Polski / English / Deutsch / Français / Español / 中文.
macOS / Linux: pobierz install.sh i uruchom w Terminalu: bash install.sh (albo jednym poleceniem:
curl -fsSL https://github.com/rawel2/Vault-Konfigurator-wydania/releases/latest/download/install.sh | bash).
Komunikaty po polsku albo po angielsku według języka systemu. Start później: skrót albo run.sh.
/ Download install.sh and run it in Terminal: bash install.sh (or the one-liner above).
Aktualizacja: uruchom instaluj.bat ponownie (ustawienia zostają). / Update: run install.bat again (settings are kept).
Instrukcja / Manual: VAULT_instrukcja_PL.pdf, VAULT_manual_EN.pdf.
Autorzy programu / Program authors: rawel2, Claude (Anthropic). VAULT, projekt i pliki STL / design and STL files © USSA Design.
Program nieoficjalny, niepowiązany z USSA Design. / Unofficial tool, not affiliated with USSA Design.
Udostępniane za zgodą USSA Design (10.2026). / Shared with the permission of USSA Design (10/2026).
Licencja programu / Program licence: MIT (bez materiałów USSA Design / excluding USSA Design materials – NOTICE.md).
Kod / source: ce658ac
Konfigurator VAULT 1.1.37
Co nowego w 1.1.37 (PL)
Przegródki szuflad Grid Dividers
- Nowa zakładka „Przegródki” – przegródki USSA Grid Dividers wpinane w otwory w dnie pudełek szuflad. W polu „Wkład” wybierz „przegródki Grid Dividers”, a w zakładce przeciągnij wzdłuż rzędu albo kolumny otworów – program dobiera plik przegródki odpowiedniej długości, części brzegowe przy ściankach i piny. Lista części, „Przygotuj wydruk” i widok 3D.
- Własne elementy generowane przez program: łuki 90° i 180°, łączniki na skrzyżowaniach (krzyżak, trójnik, kątownik – ramiona półtora odstępu, żeby stopy przegródek się nie zderzały), krótkie przegródki (1–4 odstępy), części brzegowe na wymiar (dochodzą do ścianki) i piny z luzem (domyślnie 0,2 mm, płaski spód; zamiast nich można wybrać piny USSA). Szczelina na język – dokładnie jak w przegródkach USSA. Łuki, łączniki i piny sprawdzone wydrukiem.
- Kolor przegródek – własny albo taki jak pojemniki gridfinity.
- Wkład osobno dla każdej szuflady w module – np. moduł 4F z szufladami 2F/1F/1F: gridfinity w jednej, przegródki w drugiej, pusta trzecia.
Logo na frontach (zakładka „Etykiety”)
- To samo logo na każdym froncie szuflad i skrzynek w projekcie – napis (z symbolem), ikona albo własny plik SVG; styl wpuszczony (drugi kolor równo z licem), wypukły albo wklęsły.
- Logo w prawym dolnym rogu frontu, na osi etykiety – jedyne miejsce wolne na wszystkich 20 frontach USSA – w tym samym rozmiarze na wszystkich frontach projektu (największym, jaki mieści się na każdym z nich).
- Fronty z logo zastępują fronty USSA na liście części, w „Przygotuj wydruk”, w widoku 3D i w „Składaniu”.
Lista części i wydruk
- Kolumna „Płyta” w „Do druku” – po przygotowaniu wydruku widać, na której płycie 3MF jest każda część.
- Kolory: 15 grup wydruku zgodnych z kolorami widoku 3D (osobno etykiety, blokady, uchwyty, fronty i wkłady skrzynek), palety z filamentów Bambu PLA Basic, „Wklej kolory z widoku 3D”; nakładka kluczyka w kolorze frontu, prowadnice w kolorze obudowy – jak na rysunkach USSA.
- Zatrzaski także w dachach i skrzynkach (gniazda w spodzie, jak w modułach szuflad), pręt M16 tylko z kołami, długie śruby do uchwytu ściennego.
- Koła i stopka jako jedno pole – stopka trzyma tylko przód, więc same koła albo sama stopka nie stawiały wieży poziomo.
- „Uwagi do projektu”: części za duże na wybraną drukarkę, pojemniki za wysokie do szuflady, etykiety z za małymi literami.
Poprawki
- Pojemniki gridfinity: miejsce w szufladach liczone z dnem pudełka 3 mm (2F – do 10 jednostek z rantem zamiast 11). W widoku 3D płyta, pojemniki i przegródki nie wchodzą już w dno.
- Podgląd etykiety czytelny także na ciemnym licu; pole napisu logo nie traci kursora.
- Wąski ekran (telefon, 375 px) – tabele przewijają się w poziomie, nic nie wystaje poza kartę.
Po aktualizacji serwer uruchamia się ponownie sam. Nowe teksty w DE/FR/ES/ZH – tłumaczenia bez sprawdzenia przez native speakera, poprawki mile widziane.
What's new in 1.1.37 (EN)
Grid Dividers for drawers
- New “Dividers” tab – USSA Grid Dividers pinned into the holes in the drawer box floor. Set the drawer's “Insert” to “Grid Dividers” and drag along a row or column of holes – the program picks the divider file of the right length, the edge pieces at the walls and the pins. Parts list, “Prepare print” and 3D view.
- Our own generated pieces: 90° and 180° arcs, connectors at crossings (cross, T, corner – arms one and a half pitches long so the divider feet don't collide), short dividers (1–4 pitches), made-to-measure edge pieces (reaching the wall) and pins with clearance (0.2 mm by default, flat bottom; USSA pins can be chosen instead). The tongue slot is exactly like in the USSA dividers. Arcs, connectors and pins checked by printing.
- Divider colour – their own or the same as the gridfinity bins.
- Insert per drawer in a module – e.g. a 4F module with 2F/1F/1F drawers: gridfinity in one, dividers in another, the third empty.
Logo on the fronts (“Labels” tab)
- The same logo on every drawer and sustainer front in the project – text (with a symbol), an icon or your own SVG file; inlaid (second colour flush with the face), raised or engraved.
- The logo sits in the bottom right corner of the front, on the label axis – the only spot free on all 20 USSA fronts – in the same size on every front of the project (the largest that fits on each of them).
- Fronts with the logo replace the USSA fronts in the parts list, “Prepare print”, the 3D view and “Assembly”.
Parts list and printing
- “Plate” column in “To print” – after preparing a print you see which 3MF plate holds each part.
- Colours: 15 print groups matching the 3D view colours (labels, stoppers, handles, sustainer fronts and inserts separately), palettes made of Bambu PLA Basic filaments, “Paste colours from 3D view”; key cap in the front colour, runner guides in the housing colour – as in the USSA drawings.
- Latches also for roofs and sustainers (sockets in their bottom, like the drawer modules), M16 rod only with wheels, long screws for the wall mount.
- Wheels and feet as one option – the feet hold only the front, so wheels alone or feet alone didn't keep the tower level.
- “Project notes”: parts too big for the selected printer, bins too tall for the drawer, labels with too small letters.
Fixes
- Gridfinity bins: drawer height counted with the 3 mm box floor (2F – up to 10 units with the lip instead of 11). In the 3D view baseplates, bins and dividers no longer sink into the floor.
- Label preview readable on a dark face too; the logo text field keeps the cursor.
- Narrow screen (phone, 375 px) – tables scroll sideways, nothing sticks out of the page.
After the update the server restarts on its own. New texts in DE/FR/ES/ZH were translated without a native-speaker check – corrections welcome.
Konfigurator wież z pojemników VAULT (USSA Design) – lista plików STL, szacunek druku, płyty 3MF, wizualizacja 3D.
Instalacja (Windows): pobierz instaluj.bat i uruchom go. Instalator sprawdzi Pythona (w razie braku zaproponuje
instalację przez winget), pobierze program, zainstaluje numpy, utworzy skrót na pulpicie i uruchomi konfigurator.
Pliki STL VAULT kupisz u producenta: https://www.ussadesign.com/pages/vault – program poprosi o ich folder.
Installation (Windows): download install.bat (English installer) and run it. It checks Python (offers to install
it with winget), downloads the program, installs numpy, creates a desktop shortcut and starts the configurator.
The VAULT STL files are sold by USSA Design: https://www.ussadesign.com/pages/vault – the program asks for their folder.
The program language can be switched in Settings (top right): automatic / Polski / English / Deutsch / Français / Español / 中文.
macOS / Linux: pobierz install.sh i uruchom w Terminalu: bash install.sh (albo jednym poleceniem:
curl -fsSL https://github.com/rawel2/Vault-Konfigurator-wydania/releases/latest/download/install.sh | bash).
Komunikaty po polsku albo po angielsku według języka systemu. Start później: skrót albo run.sh.
/ Download install.sh and run it in Terminal: bash install.sh (or the one-liner above).
Aktualizacja: uruchom instaluj.bat ponownie (ustawienia zostają). / Update: run install.bat again (settings are kept).
Instrukcja / Manual: VAULT_instrukcja_PL.pdf, VAULT_manual_EN.pdf.
Autorzy programu / Program authors: rawel2, Claude (Anthropic). VAULT, projekt i pliki STL / design and STL files © USSA Design.
Program nieoficjalny, niepowiązany z USSA Design. / Unofficial tool, not affiliated with USSA Design.
Udostępniane za zgodą USSA Design (10.2026). / Shared with the permission of USSA Design (10/2026).
Licencja programu / Program licence: MIT (bez materiałów USSA Design / excluding USSA Design materials – NOTICE.md).
Kod / source: ae5b1fa
Konfigurator VAULT 1.1.36
Co nowego w 1.1.36 (PL)
Składanie
- Nowa zakładka „Składanie” – kroki od spodu wieży: podstawa, każda warstwa (moduł, każda szuflada, każda skrzynka), dach, tył i uchwyty. Przy każdym kroku części i śruby na jedną wieżę, strony instrukcji USSA, etykieta z napisem tej szuflady i liczba jej pojemników. Zrobione kroki odhaczasz – zapisują się z projektem.
Lista części i wydruk
- Filament według koloru – nad listą części: ile filamentu każdego koloru (i TPU) potrzeba, a po oznaczeniu wydrukowanych części – ile zostało.
- Wydruki dwukolorowe na osobnych płytach – etykiety i pojemniki z napisem wpuszczonym (litery w drugim kolorze) trafiają na własne płyty, np.
plyta_07_różowy_napis_czarny, więc pozostałe płyty drukują się jednym filamentem, bez wieży czyszczącej. - Nowe drukarki: Bambu Lab H3C i A2L (330×320 mm), Anycubic Kobra S1 (250 mm), Kobra 3 Max i Kobra 3 Max V2 (426×420 mm) – z profilami Bambu Studio / Anycubic Slicer Next w projekcie slicera.
Modyfikacje
- Kółka meblowe (Casters Mode) – zamiast kół i stopki: 4 kółka skrętne z trzpieniem M8 w otworach spodu podstawy (lista „Niedrukowane”, widok 3D).
- Zgodnie z instrukcją USSA: uchwyt stały i pegboard tylko z kręgosłupem, uchwyt ścienny tylko bez kręgosłupa (przykręca się w jego miejscu). Niepasujące pola są wyszarzone, a zapisany wybór czeka; „Uwagi do projektu” mówią, co jest pomijane.
Widok 3D
- Etykiety z napisem we frontach – etykiety przypisane do frontów (przycisk „Etykiety z projektu”) zamiast pustych, litery w kolorze napisu.
Poprawki
- Pod podsumowaniem nie pojawia się już napis „null”, gdy projekt nie ma uwag.
Po aktualizacji serwer uruchamia się ponownie sam. Nowe teksty w DE/FR/ES/ZH – tłumaczenia bez sprawdzenia przez native speakera, poprawki mile widziane.
What's new in 1.1.36 (EN)
Assembly
- New “Assembly” tab – steps from the bottom of the tower up: base, each layer (module, each drawer, each sustainer), roof, back and handles. Each step lists the parts and screws for one tower, the USSA manual pages, the drawer's label with text and the number of its bins. Tick the steps you have done – they are saved with the project.
Parts list and printing
- Filament by colour – above the parts list: how much filament of each colour (and TPU) you need and, once you mark parts as printed, how much is left.
- Two-colour prints on their own plates – labels and bins with inlaid text (letters in a second colour) go onto separate plates, e.g.
plate_07_pink_text_black, so the other plates print with one filament and no prime tower. - New printers: Bambu Lab H3C and A2L (330×320 mm), Anycubic Kobra S1 (250 mm), Kobra 3 Max and Kobra 3 Max V2 (426×420 mm) – with Bambu Studio / Anycubic Slicer Next profiles in the slicer project.
Modifications
- Casters (Casters Mode) – instead of the wheels and feet: 4 swivel casters with an M8 stem in the holes in the bottom of the base (“Hardware” list, 3D view).
- Following the USSA manual: the stationary handle and the pegboard need the backbone, wall mounts only without the backbone (they are screwed in its place). Options that don't fit are greyed out and the saved choice waits; “Project notes” say what is skipped.
3D view
- Labels with text in the fronts – labels assigned to fronts (the “Labels from project” button) instead of blank ones, letters in the text colour.
Fixes
- “null” no longer appears under the summary when the project has no notes.
After the update the server restarts on its own. New texts in DE/FR/ES/ZH were translated without a native-speaker check – corrections welcome.
Konfigurator wież z pojemników VAULT (USSA Design) – lista plików STL, szacunek druku, płyty 3MF, wizualizacja 3D.
Instalacja (Windows): pobierz instaluj.bat i uruchom go. Instalator sprawdzi Pythona (w razie braku zaproponuje
instalację przez winget), pobierze program, zainstaluje numpy, utworzy skrót na pulpicie i uruchomi konfigurator.
Pliki STL VAULT kupisz u producenta: https://www.ussadesign.com/pages/vault – program poprosi o ich folder.
Installation (Windows): download install.bat (English installer) and run it. It checks Python (offers to install
it with winget), downloads the program, installs numpy, creates a desktop shortcut and starts the configurator.
The VAULT STL files are sold by USSA Design: https://www.ussadesign.com/pages/vault – the program asks for their folder.
The program language can be switched in Settings (top right): automatic / Polski / English / Deutsch / Français / Español / 中文.
macOS / Linux: pobierz install.sh i uruchom w Terminalu: bash install.sh (albo jednym poleceniem:
curl -fsSL https://github.com/rawel2/Vault-Konfigurator-wydania/releases/latest/download/install.sh | bash).
Komunikaty po polsku albo po angielsku według języka systemu. Start później: skrót albo run.sh.
/ Download install.sh and run it in Terminal: bash install.sh (or the one-liner above).
Aktualizacja: uruchom instaluj.bat ponownie (ustawienia zostają). / Update: run install.bat again (settings are kept).
Instrukcja / Manual: VAULT_instrukcja_PL.pdf, VAULT_manual_EN.pdf.
Autorzy programu / Program authors: rawel2, Claude (Anthropic). VAULT, projekt i pliki STL / design and STL files © USSA Design.
Program nieoficjalny, niepowiązany z USSA Design. / Unofficial tool, not affiliated with USSA Design.
Udostępniane za zgodą USSA Design (10.2026). / Shared with the permission of USSA Design (10/2026).
Licencja programu / Program licence: MIT (bez materiałów USSA Design / excluding USSA Design materials – NOTICE.md).
Kod / source: 37d93e0
Konfigurator VAULT 1.1.35
Co nowego w 1.1.35 (PL)
Lista części
- Miniatura części – po najechaniu kursorem na nazwę pliku w „Do druku” pojawia się podgląd części (ułożonej jak w pliku, czyli jak na stole slicera) z wymiarami.
- Ukryty kluczyk: „drukuj klucz (jeden na projekt)” – w Ustawieniach pod „Kluczyk”. Wyjmowana rączka (Hidden Key Part 2) pasuje do wszystkich szuflad, więc na liście jest jedna na cały projekt albo żadna (wcześniej – jedna na każdą szufladę).
Pojemniki gridfinity
- Pojemniki w podglądzie i w widoku 3D stoją dokładnie na kieszeniach płyty USSA szuflady. Dotąd w płycie S z 1 uchwytem były przesunięte o pół kratki, a w pozostałych o 2 mm.
Folder wyników i bezpieczeństwo
- „Wyczyść” usuwa tylko wyniki konfiguratora – foldery z ukrytym znacznikiem
.vault-wynik(dodawanym od tej wersji). Starsze wyniki zostają: program je wymienia i trzeba je usunąć ręcznie, jeśli nie są potrzebne. - Folderem na wydruki nie może być korzeń dysku ani folder domowy.
- Serwer sprawdza adres przy każdym zapytaniu (także plików programu i biblioteki), nie podaje plików i folderów zaczynających się od kropki, blokuje osadzanie strony w obcej ramce i ma limity rozmiaru zapytań. Kto otwiera konfigurator pod innym adresem (NAS, Docker), dalej dopisuje go w
VAULT_HOSTS.
Poprawki
- Po zmianie języka komunikat o folderze biblioteki od razu pojawia się w nowym języku.
Po aktualizacji serwer uruchamia się ponownie sam. Nowe teksty w DE/FR/ES/ZH – tłumaczenia bez sprawdzenia przez native speakera, poprawki mile widziane.
What's new in 1.1.35 (EN)
Parts list
- Part thumbnail – hovering over a file name in “To print” shows a preview of the part (placed as in the file, i.e. as on the slicer bed) with its dimensions.
- Hidden key: “print the key (one per project)” – in Settings under “Key”. The removable handle (Hidden Key Part 2) fits every drawer, so the list has one for the whole project or none (previously one per drawer).
Gridfinity bins
- Bins in the preview and in the 3D view now sit exactly on the pockets of the USSA drawer baseplate. Until now they were half a cell off on the S plate with one handle and 2 mm off on the others.
Output folder and security
- “Clear” deletes only configurator results – folders with a hidden
.vault-wynikmarker (added from this version). Older results stay: the program lists them, delete them by hand if you no longer need them. - The output folder can no longer be a drive root or the home folder.
- The server checks the address on every request (including program and library files), does not serve files and folders starting with a dot, blocks embedding the page in a foreign frame and limits request sizes. If you open the configurator under another address (NAS, Docker), keep adding it to
VAULT_HOSTS.
Fixes
- After switching the language, the library folder message appears in the new language right away.
After the update the server restarts on its own. New texts in DE/FR/ES/ZH were translated without a native-speaker check – corrections welcome.
Konfigurator wież z pojemników VAULT (USSA Design) – lista plików STL, szacunek druku, płyty 3MF, wizualizacja 3D.
Instalacja (Windows): pobierz instaluj.bat i uruchom go. Instalator sprawdzi Pythona (w razie braku zaproponuje
instalację przez winget), pobierze program, zainstaluje numpy, utworzy skrót na pulpicie i uruchomi konfigurator.
Pliki STL VAULT kupisz u producenta: https://www.ussadesign.com/pages/vault – program poprosi o ich folder.
Installation (Windows): download install.bat (English installer) and run it. It checks Python (offers to install
it with winget), downloads the program, installs numpy, creates a desktop shortcut and starts the configurator.
The VAULT STL files are sold by USSA Design: https://www.ussadesign.com/pages/vault – the program asks for their folder.
The program language can be switched in Settings (top right): automatic / Polski / English / Deutsch / Français / Español / 中文.
macOS / Linux: pobierz install.sh i uruchom w Terminalu: bash install.sh (albo jednym poleceniem:
curl -fsSL https://github.com/rawel2/Vault-Konfigurator-wydania/releases/latest/download/install.sh | bash).
Komunikaty po polsku albo po angielsku według języka systemu. Start później: skrót albo run.sh.
/ Download install.sh and run it in Terminal: bash install.sh (or the one-liner above).
Aktualizacja: uruchom instaluj.bat ponownie (ustawienia zostają). / Update: run install.bat again (settings are kept).
Instrukcja / Manual: VAULT_instrukcja_PL.pdf, VAULT_manual_EN.pdf.
Autorzy programu / Program authors: rawel2, Claude (Anthropic). VAULT, projekt i pliki STL / design and STL files © USSA Design.
Program nieoficjalny, niepowiązany z USSA Design. / Unofficial tool, not affiliated with USSA Design.
Udostępniane za zgodą USSA Design (10.2026). / Shared with the permission of USSA Design (10/2026).
Licencja programu / Program licence: MIT (bez materiałów USSA Design / excluding USSA Design materials – NOTICE.md).
Kod / source: a803ea3
Konfigurator VAULT 1.1.34
Co nowego w 1.1.34 (PL)
Łatwiejszy start i spójniejszy interfejs
- Kreator wieży (przycisk „Kreator…” przy zestawach): szablon → rozmiar → warstwy od spodu → góra i dodatki → podsumowanie z liczbą wydruków, czasem i filamentem, z podglądem na żywo. Szablony: pusta wieża, biurko, warsztat na kółkach, skrzynka narzędziowa, pod blat; haczyk „wkład gridfinity we wszystkich szufladach / skrzynkach”. W nowym projekcie karta „Pierwszy raz tutaj?”.
- Cofnij / Ponów – strzałki w nagłówku albo Ctrl+Z / Ctrl+Y. Usunięcie zestawu, warstwy, pojemnika czy etykiety pokazuje komunikat z „Cofnij” zamiast okna „Na pewno?”.
- Panel Pomoc w nagłówku: kroki pracy z przyciskami „przejdź”, skróty klawiszowe, mysz w widoku 3D, zapis projektu.
- Podpowiedzi „?” przy nieoczywistych opcjach (głębokość, fronty, wkład, wnętrze skrzynki, dach, podstawa, kręgosłup, uchwyty, kluczyk, listwy zębate).
- Zakładki w kolejności pracy: Do druku, Niedrukowane | Pojemniki gridfinity, Etykiety | Przygotuj wydruk, z przyciskami „Następny krok”; CSV jako mały przycisk przy listach.
- Uwagi do projektu w podsumowaniu: uchwyt wysuwany bez kręgosłupa, koła bez podstawy, pegboard bez kręgosłupa, skrzynka na pół szerokości pod warstwą, pojemniki poza siatką, niezgodna liczba etykiet – z przyciskiem „Pokaż”.
- Projekt → Nowy projekt (poprzedni wraca przez Cofnij); widoczny fokus przy poruszaniu się klawiszem Tab.
Etykiety
- „Etykiety z projektu” – po jednej etykiecie na każdy front szuflady i skrzynki, z opisem miejsca; wystarczy wpisać napisy. Przypomnienie z przyciskiem „Nie drukuj pustych”.
- Ostrzeżenie w „Przygotuj wydruk”, gdy puste etykiety są wyłączone, a etykiet z napisem jest więcej albo mniej niż frontów.
Pojemniki gridfinity
- Napisy i symbole na półkach – wpuszczone (drugi filament) albo wklęsłe, osobno dla każdej przegródki; symbol z napisem wyśrodkowany, podgląd w kolorze liter.
- Szybkie wypełnianie wolnych kratek: 1×1, 2×1, 1×2, 2×2.
Widok 3D
- Rozsunięcie wieży (suwak) we wszystkich trzech osiach – także pudełka, prowadnice i wnętrze zamkniętych szuflad.
- Bez perspektywy – rzut prostokątny.
Po aktualizacji serwer uruchamia się ponownie sam (nowa wersja generatora pojemników). Nowe teksty w DE/FR/ES/ZH – tłumaczenia bez sprawdzenia przez native speakera, poprawki mile widziane.
What's new in 1.1.34 (EN)
Easier start and a more consistent interface
- Tower wizard (“Wizard…” next to the sets): template → size → layers from the bottom → top and extras → summary with print count, time and filament, with a live preview. Templates: empty tower, desk, workshop on wheels, tool chest, under-desk; a “gridfinity insert in all drawers / sustainers” checkbox. New projects show a “First time here?” card.
- Undo / Redo – arrows in the header or Ctrl+Z / Ctrl+Y. Deleting a set, layer, bin or label shows a message with “Undo” instead of an “Are you sure?” dialog.
- Help panel in the header: workflow steps with “go” buttons, keyboard shortcuts, mouse in the 3D view, saving projects.
- “?” hints next to less obvious options (depth, fronts, insert, sustainer interior, roof, base, backbone, handles, key, geared rails).
- Tabs in working order: To print, Hardware | Gridfinity bins, Labels | Prepare print, with “Next step” buttons; CSV as a small button next to the lists.
- Project notes in the summary: pull-out handle without a backbone, wheels without a base, pegboard without a backbone, half-width sustainer under a layer, bins outside the grid, label count mismatch – each with a “Show” button.
- Project → New project (the previous one comes back with Undo); visible focus when moving with the Tab key.
Labels
- “Labels from project” – one label for every drawer and sustainer front, with its location; just type the texts. A reminder with a “Don’t print blank ones” button.
- A warning in “Prepare print” when blank labels are off but there are more or fewer labels with text than fronts.
Gridfinity bins
- Text and symbols on the label shelves – inlaid (second filament) or engraved, separately for each compartment; symbol and text centred, preview in the letter colour.
- Quick fill of free cells: 1×1, 2×1, 1×2, 2×2.
3D view
- Explode (slider) in all three axes – including boxes, runners and the inside of closed drawers.
- Orthographic – view without perspective.
After the update the server restarts on its own (new bin generator version). New texts in DE/FR/ES/ZH were translated without a native-speaker check – corrections welcome.
Konfigurator wież z pojemników VAULT (USSA Design) – lista plików STL, szacunek druku, płyty 3MF, wizualizacja 3D.
Instalacja (Windows): pobierz instaluj.bat i uruchom go. Instalator sprawdzi Pythona (w razie braku zaproponuje
instalację przez winget), pobierze program, zainstaluje numpy, utworzy skrót na pulpicie i uruchomi konfigurator.
Pliki STL VAULT kupisz u producenta: https://www.ussadesign.com/pages/vault – program poprosi o ich folder.
Installation (Windows): download install.bat (English installer) and run it. It checks Python (offers to install
it with winget), downloads the program, installs numpy, creates a desktop shortcut and starts the configurator.
The VAULT STL files are sold by USSA Design: https://www.ussadesign.com/pages/vault – the program asks for their folder.
The program language can be switched in Settings (top right): automatic / Polski / English / Deutsch / Français / Español / 中文.
macOS / Linux: pobierz install.sh i uruchom w Terminalu: bash install.sh (albo jednym poleceniem:
curl -fsSL https://github.com/rawel2/Vault-Konfigurator-wydania/releases/latest/download/install.sh | bash).
Komunikaty po polsku albo po angielsku według języka systemu. Start później: skrót albo run.sh.
/ Download install.sh and run it in Terminal: bash install.sh (or the one-liner above).
Aktualizacja: uruchom instaluj.bat ponownie (ustawienia zostają). / Update: run install.bat again (settings are kept).
Instrukcja / Manual: VAULT_instrukcja_PL.pdf, VAULT_manual_EN.pdf.
Autorzy programu / Program authors: rawel2, Claude (Anthropic). VAULT, projekt i pliki STL / design and STL files © USSA Design.
Program nieoficjalny, niepowiązany z USSA Design. / Unofficial tool, not affiliated with USSA Design.
Udostępniane za zgodą USSA Design (10.2026). / Shared with the permission of USSA Design (10/2026).
Licencja programu / Program licence: MIT (bez materiałów USSA Design / excluding USSA Design materials – NOTICE.md).
Kod / source: 223c541