Skip to content

Releases

astar 0.1.22-beta

Choose a tag to compare

@rcludwick rcludwick released this 14 Nov 21:30

A release for the node. astar-server now holds a link to an AllStarLink node
the way a stock node does, passes speech through without damaging it, and
keeps a record of every link, so a drop is no longer a mystery.

Added

  • A link log on the node. astar-server writes one line when a link
    starts, when the codec is agreed, when the link is up and when it ends. The
    last line says who hung up (us, them or a time-out), the reason given, and
    how long the link lasted. A link that ends within ten seconds of coming up
    also gets a warning line, because that is what a node "dropping off" looks
    like. See
    Reading the link log.

Changed

  • The parrot keeps a linked AllStar node connected. In parrot mode
    astar-server used to hang up after every echo, which suits someone calling
    in for a signal report but made a linked node drop a few seconds after each
    over. A node that links in now stays linked and can talk again. Other
    callers are still hung up after their report.

Fixed

  • Unfinished calls no longer lock everyone out of the node. A caller that
    started a call and never finished the opening handshake held one of the
    node's call slots until the server was restarted. On a node open to the
    internet, stray packets could fill every slot, after which every real node
    was turned away as busy. Such a call now ends by itself, and the node no
    longer sets anything up for a caller until that caller has proved its
    address by returning a signed token, the way Asterisk does it. The node
    also used to accept a token it had never issued; it now checks them.

  • Speech passes through the node's bridge undamaged. The bridge read each
    member's audio once every 20 ms with no slack, so a packet a few
    milliseconds late missed its turn and about half the overs picked up a
    20 ms stall or a 40 ms repeat. Each member now has a small buffer that
    absorbs late packets. It adds about 40 to 60 ms of delay.

  • The parrot plays back what you said, pauses included. When a node keyed
    by voice level, the parrot dropped the quiet between words, so a five-second
    over came back as under four seconds with the words run together. A late
    packet could also leave a hole in the recording. Both are fixed.

Full changelog: https://rcludwick.github.io/astar/changelog/

astar 0.1.21-beta

Choose a tag to compare

@rcludwick rcludwick released this 14 Nov 02:24

Bluetooth headsets that work for a whole call, a push-to-talk button you can
hold in your hand, and a directory search that finds AllStar nodes and
EchoLink stations alongside the reflectors.

Added

  • A Bluetooth push-to-talk button. The Inrico B02PTT, a Bluetooth
    speaker-mic with a push-to-talk button, keys astar while you hold the
    button, the same as the Space bar. Choose it as the PTT in Quick settings →
    Station, press it once to prove it is yours, and astar finds it by itself
    from then on. It goes through the same transmit time-out as everything
    else, and if the link drops while you are transmitting, astar stops within
    about 2.5 seconds and waits for you to let go before it will key again.
    See
    Bluetooth PTT.

  • AllStar nodes in the directory search. The search pane has an AllStar
    filter, and All networks includes AllStar nodes as soon as you type. Search
    by node number, callsign, town or frequency. Node numbers now show with
    their callsign and location in recents, favorites and the call header. The
    list ships with the app, so it works on first launch with no network, and
    refreshes itself weekly from hamcall-db.

  • EchoLink stations in the directory search. While you are logged in to
    EchoLink, the filter in the top right of the search pane offers EchoLink,
    and All networks includes the stations too. If the login drops, the filter
    goes back to All networks, and returns to EchoLink when you log back in.
    See Searching the reflector directory.

  • Net recordings you can browse. The net recorder from 0.1.20-beta now
    has pages to go with it: a list of recorded nets, each session's overs
    with a waveform and who spoke, and a player that jumps to any over.
    astar-server serves them under /nets/ behind sign-in, and
    astar-netrec serves them on 127.0.0.1 on the Mac it runs on. See
    Net recordings.

Changed

  • VOX ignores clicks. VOX used to key on the single loudest sample of
    the last few milliseconds, so a tap on the mic, a breath pop or a Bluetooth
    glitch keyed you for the whole hang time. It now listens to how loud the
    mic has been over the last 50 ms and keys only once that has stayed above
    the threshold for 120 ms; nothing shorter than about 70 ms can key it.
    To keep the first word whole, astar sends the 250 ms before VOX keyed
    along with the over. Because loudness reads about 10 dB lower than peaks,
    your threshold is converted once (−40 becomes −50), and the slider now
    stops at −58, because a reading at the very bottom of the meter is
    silence. While VOX is on, the other ways of keying send that 250 ms too.

  • Settings is easier to scan. Audio configs (renamed from "Saved audio
    configs") and Mic Profiles are at the top, and Transmit folds away like
    every other section.

Fixed

  • A Bluetooth headset no longer goes silent when the call starts. Opening
    a Bluetooth headset's microphone switches it into its hands-free mode,
    which changes its sample rate and used to kill the speaker for the rest
    of the call: astar said Connected and you heard nothing. astar now opens
    the mic first and rebuilds a stream whose device changes under it. If a
    rebuild ever fails, the window says "Speaker stopped" instead of staying
    quietly deaf.

  • Turning VOX off no longer forgets its settings. The threshold and hang
    time went back to their defaults until the next launch.

Full changelog: https://rcludwick.github.io/astar/changelog/

astar 0.1.20-beta

Choose a tag to compare

@rcludwick rcludwick released this 08 Nov 03:06

A way to capture exactly what a call receives, so a bad moment on the air
can be studied afterwards, and a net recorder that joins a reflector on a
schedule and keeps what it hears.

Added

  • Packet capture, for chasing audio problems. Some problems, like the
    hollow echo heard on a long EchoLink call, only show up on the air and are
    gone by the time you reconnect. Packet capture keeps the evidence. Turn on
    Debug mode in Settings → Recording → Advanced, and a capture button
    with a ladybug appears next to Record (⇧⌘R). Press it during a call and
    astar writes every packet that call receives to a .pcap file, which
    Wireshark opens, with a small .jitter.jsonl file beside it recording how
    late each packet arrived. Press it again, or hang up, and it stops. The
    packets are saved as they arrived, after any decryption, and they are
    written on their own thread, so a capture can't disturb what you hear.
    The folder keeps itself under a size limit you choose, deleting the oldest
    files first. These files hold other people's voices, so keep them to
    yourself. See
    Packet capture.

  • The node can capture packets too. astar-server has the same switch
    ([packet_log] debug_mode in node.toml, or Debug mode on its Settings
    page) and a capture button on its Recordings page, where the captures can
    also be downloaded. See
    Packet capture on the node.

  • A net recorder. astar-netrec is a small receive-only program for a
    Linux machine or a Mac. You list your nets (which M17 or D-Star reflector,
    which day, what time) and shortly before each one it joins, records the
    whole evening plus one file per over, logs who talked when, and leaves. It
    has no microphone or push-to-talk line, and three separate layers keep it
    from ever keying. It is built from source for now. See
    Net recorder.

Changed

  • The Account section of Settings is now called AllStarLink, which is
    what it holds: your callsign, node number and allstarlink.org password.

Fixed

  • Settings → Recording → Advanced opens. Clicking it turned the
    triangle, but nothing appeared below it, because the whole group sat
    inside one row of the Settings list and the row never grew. Each setting
    under it is now a row of its own.

Full changelog: https://rcludwick.github.io/astar/changelog/

astar 0.1.19-beta

Choose a tag to compare

@rcludwick rcludwick released this 05 Nov 04:26

EchoLink that stays in time on a busy conference, a built-in D-Star vocoder,
recordings without a beat, and a Settings pane you can fold.

Added

  • D-Star can run without a vocoder stick. astar now has a built-in
    software vocoder for D-Star: Bruce Perens' AMBE 3600×2400 implementation.
    Choose it in Settings → Vocoders, or with [vocoder] dstar = "software" in node.toml; the dongle stays the default, and nothing
    switches by itself. With no stick added, the Vocoders section and a
    refused D-Star connect offer it in one click. It is D-Star only: System
    Fusion, NXDN and DMR still need a dongle, because their AMBE+2 codec is
    patented until 2028-05-20. The vocoder is LGPL-3.0; see
    LICENSE-EXCEPTIONS.md §9. See
    Vocoders.

  • Settings folds. Every Settings section sits behind a disclosure
    triangle, with Expand All / Collapse All beside the title and
    Option-click to open or fold them all. astar remembers which sections you
    left open; a fresh install opens just Operator and Account. Buttons that
    jump to a section, such as "Open Vocoder Settings…", open it on the way.

  • The node warns that an M17 reflector it monitors goes out on your
    links.
    The monitor never sends voice to the reflector, but what it hears
    is relayed to every AllStar node and EchoLink station on the node, and a
    linked radio transmits it. The admin page, the settings page's M17 card,
    the POST /m17 reply (relays_to, warning), /status (m17_relay),
    Discord's /dial m17 reply and the log all say so, with how many stations
    are connected at that moment. The 0.1.17-beta notes and the Discord page
    understated this and are corrected.

Fixed

  • EchoLink calls no longer fall further and further behind on a busy
    conference or repeater that never pauses, which could leave the audio
    sounding hollow. Received EchoLink audio now plays through the same
    adaptive jitter buffer as AllStarLink (the Jitter buffer switch and
    its Min/Max apply), and the call-quality line under the meters now shows
    on EchoLink calls too.

  • The jitter buffer gives back an over-deep cushion and recovers after a
    stall,
    on AllStarLink as well as EchoLink. It now drops the odd frame to
    shrink while audio keeps arriving, as Asterisk's does, and after a network
    stall it skips the frames that are badly overdue instead of staying behind
    for the rest of the call.

  • Recordings no longer have a regular beat. An app recording of an
    EchoLink call could carry a flutter about once a second: the recorder
    wrote short stretches of silence the speaker never played, then dropped
    audio to catch up. Recordings of M17, D-Star, DMR, YSF and NXDN calls on a
    44.1 or 48 kHz output had the same flaw.

  • dstar-listen and the other listen tools build again with the
    software vocoder in, and the YSF, NXDN and DMR listen tools build on their
    own.

Full changelog: https://rcludwick.github.io/astar/changelog/

astar 0.1.18-beta

Choose a tag to compare

@rcludwick rcludwick released this 02 Nov 00:17

Favorites shared across every network, EchoLink on the same dial row as the
rest, an EchoLink section in Settings, sharp station text and even call
buttons.

Updating from 0.1.16-beta? 0.1.17-beta wasn't released on its own, so its
notes apply to this update too (see the full changelog): EchoLink, recording, and the server's
public page, sign-in and Discord bridge. One of them needs you to do something.
If you use D-Star, System Fusion, NXDN or DMR, add your DVstick or ThumbDV
once in Settings → Vocoders, because astar now opens only the vocoder
sticks you've added.

Added

  • Favorites shared across every network, and EchoLink on the same dial
    row.
    The saved-nodes menu beside the dial field now lists favorites and
    recents from every network, whichever one is selected, each marked with its
    network: pick a DMR talkgroup while on AllStar and the picker switches to
    DMR with the network, talkgroup and timeslot filled in, ready for
    Connect. Saved nodes are keyed by network and target, so EchoLink node
    1234 and AllStar node 1234 are separate favorites, and Settings → Favorites
    lists them all with a network tag. EchoLink no longer swaps the dial row
    for a form of its own: type a callsign or node number in the same field,
    or click the magnifying glass to browse the station list in its own pane
    and choose a station into the field. One line under the row logs in or out
    with what Settings → EchoLink saved, or points you there. Stars in the
    station browser, on the dial row and on a call are the same favorite, and
    the browser's Favorites filter shows them with their live free/busy
    dot, still listing the ones that aren't online right now. They travel in
    an exported config with the node directory.

  • Settings → EchoLink. The EchoLink callsign, password and Log in
    automatically
    now have a section in Settings, beside the AllStarLink
    account: the one place they are edited now that the dial card has no login
    form. The eye button in the password field shows the saved
    password. The section also holds the location text other stations see
    beside your callsign, which had no control before, plus Log in / Log out
    and a Clear that asks first. None of it goes into an exported
    .astarconfig.

Fixed

  • The EchoLink station list's text was blurry. Switching the network to
    EchoLink slid the station list in from the top. The list is an AppKit table,
    and the slide left its scroll position on a fraction of a pixel, so every
    row's text sat between pixels and came out soft, most visibly on a non-Retina
    (1x) display. The list now fades in instead, and lands on whole pixels.
  • The call controls are one height. Hold to Talk and Record grew from
    their text and symbol and stood 35 pt tall, while Disconnect, whose phone
    symbol is short, stood 28 pt. All of them, including the VOX, listen-only and
    receive-only blocks that take the push-to-talk button's place, now share
    Disconnect's 28 pt, and the recording clock no longer changes it.

Full changelog: https://rcludwick.github.io/astar/changelog/

astar 0.1.16-beta

Choose a tag to compare

@rcludwick rcludwick released this 16 Sep 02:13

The macOS 27 release: the main window laid out again, and the frosted look
reaches the top edge.

Changed

  • The title bar is part of the frosted window. The blurred material now
    runs from the top edge down, with the traffic lights and title sitting on
    it, instead of a separate strip above the content.

  • The network picker folds instead of clipping. Regular where it fits,
    small where that fits, and a popup menu below that — every network stays
    reachable at every window width. A fresh call window opens at 470 pt,
    wide enough for the full control on macOS 27; a window you have already
    sized stays the size you left it.

  • The Discord invite is on the front page and in the site's title bar,
    and the README no longer carries version numbers that can go stale.

Fixed

  • The title bar was completely transparent on macOS 27. A titled window
    with a clear background gets no title bar backdrop at all on 27 — the
    traffic lights and title floated on the bare desktop. The window keeps its
    stock background now; the blur never needed a clear one.

  • The window's minimum width cut both edges off every row on macOS 27.
    Its roomier segmented controls pushed the six-network picker past the
    310 pt minimum, and the scrolling pane centred and clipped the overflow.
    See the folding picker above.

  • The jitter buffer sliders drew a dotted smear in a narrow window. Those
    were tick marks, seventeen per slider. The sliders still land on 10 ms
    steps; they just no longer draw them.

Full changelog: https://rcludwick.github.io/astar/changelog/

astar 0.1.15-beta

Choose a tag to compare

@rcludwick rcludwick released this 13 Sep 03:31

Received AllStarLink audio gets a jitter buffer, and the "+" that adds a
config or a mic profile is one visible button everywhere it belongs.

Added

  • The jitter buffer is a setting, on both clients. Quick settings →
    Speaker gains a Jitter buffer switch and the depth window it may adapt
    between — Min (40 ms) and Max (200 ms), Asterisk's own numbers. On
    by default, live mid-call, saved and exported with the rest of the audio
    settings. No config-version bump: a reader that predates the keys reads the
    defaults.

  • A call-quality line under the meters. On AllStarLink:
    jitter 12 ms · buffer 60 ms · lost 0 · late 0, with · underruns N
    appended only when there are some — that one is the alarm, not a statistic.
    Those figures are in the snapshot, the C header and both bindings too.

Changed

  • Adding a saved config is one obvious button, and the new config is
    there.
    The label wedged above the list is now a + on the Saved configs
    header. The config it makes arrives expanded, scrolled into view, with its
    name selected so you type over it — and the config you are running stays
    the one you are running.

  • A + starts a new mic profile everywhere one can start. Mic Profiles,
    Quick settings' mic row, a saved config's mic row and the analyzer's own
    header all carry it, and it opens a blank sheet with the keyboard already
    in the name field. "Open Mic Analyzer…" and both "Analyze…" links are gone:
    three names for one action.

Fixed

  • AllStarLink audio no longer stutters when the network does. Received
    voice went straight from the wire to the speaker, so a packet more than
    about 10 ms late played as a hole and a call that started choppy stayed
    choppy. The receive path now runs an adaptive buffer on the playback clock,
    absorbing late and reordered packets and interpolating the odd lost one.
    Off by a switch if you want the old path.

Full changelog: https://rcludwick.github.io/astar/changelog/

astar 0.1.14-beta

Choose a tag to compare

@rcludwick rcludwick released this 10 Sep 22:59

One fix, reported on GitHub the day the public repo opened.

Fixed

  • The Keychain items are filed under com.astar.app, not the author's
    callsign.
    Keychain Access shows a password item by its service name, and
    astar's was com.aj7hr.astar — so what a new user saw first was somebody
    else's callsign. Both items, the AllStarLink account and the DMR passwords,
    now live under com.astar.app. Anything saved under the old name is moved
    on the next launch and the old item removed; nobody re-enters a password.
    (Fixes #1.)

  • The unit tests no longer touch the login Keychain. One test built a real
    session through the live factory and read the Keychain on every run, which
    raised a password prompt — and parked the whole suite when the screen was
    locked. It uses in-memory stores now.

Full changelog: https://rcludwick.github.io/astar/changelog/

astar 0.1.13-beta

Choose a tag to compare

@rcludwick rcludwick released this 10 Sep 01:52

A microphone-setup release, mostly. The analyzer is a pane of the main window
rather than a window of its own, it opens on the microphone your profile
actually uses, and its threshold is now a level you can read straight off the
canvas instead of an estimate drawn a few dB too high. Last heard grew from one
name into a short history, the mic gains reach as far as the speaker's, and the
AllStarLink account asks for nothing but a password.

  • The analyzer's threshold is an absolute level in dBFS, and the background
    noise has a line of its own.
    The slider used to read "Noise floor +N dB"
    and the dashed line was tagged "(est.)" because it genuinely was one: it came
    from the coarse display spectrum while the detector medianed a finer FFT, so
    it sat several dB high and notches landed visibly beneath it. The slider is
    now a threshold in dBFS (-100 to -20, default -60) drawn on the canvas's own
    axis, and the background line is drawn and labelled separately. Nothing is
    estimated any more: a peak above the orange line is a peak Analyze notches.

  • A microphone with nothing above the threshold saves as a pass-through
    profile.
    A clean mic used to come back with notches invented out of its
    noise floor. Now the profile records that there was nothing to remove, and
    says so.

  • Mic Level and TX Gain reach 400%, matching the speaker.

  • **The AllStarLink account asks for a password only,

Full changelog: https://rcludwick.github.io/astar/changelog/

astar 0.1.12-beta

Choose a tag to compare

@rcludwick rcludwick released this 08 Sep 02:22

A System Fusion release, mostly. Your over now carries your callsign, so the reflector and the radios on it know who is talking, and the transmitted audio is no longer scrambled on the way out: every frame had been permuted a second time before it left, so 1 bit in 49 landed where a receiver expected it. Receive was never affected, and neither was D-Star.

Last heard now names whoever keyed up on M17 and System Fusion, as it already did on D-Star. The AllStarLink account asks for a password only; the portal never needed the node number.

Signed, notarized macOS build, arm64 only, macOS 13 or later.

Full changelog: https://rcludwick.github.io/astar/changelog/