No CPU sensor

[Bludgeoner0]

I have set up a new installation (as an LXC via HelperScripts). Everything looks and works perfectly except temperature monitoring.

This is my test bed made of spare (read older) gaming PC parts. The CPU is an AMD 5700G. LM-sensors reports the cpu as a K10temp-pci-00c3.

Is there a method to change what Pulse pulls as the CPU temperature? Or change what LM-sensors outputs to match Pulse?

[Bludgeoner0]

Okay. To clear up a few things from my digging, the Tctl that is being reported may not actually be a valid temperature for all generations as it is used as a value to feed cooling controls (and even enable thermal throttling). see documentation
My CPU is new enough that Tctl is the same as the physical temperature reported by Tdie (in older chips).

I also have a superIO chip (nct6687) that I was able to enable in LM-Sensors for much more information such as fan speeds and voltages as well as individual temperatures, although this did NOT enable a temperature in Pulse.

nct6797-isa-0a20
Adapter: ISA adapter
in0:                     1.28 V  (min =  +0.00 V, max =  +1.74 V)
in1:                     1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                     3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                     3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                     1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                   144.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                   760.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                     3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                     3.23 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                     1.80 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                  912.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                  648.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                    1.11 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                  672.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                    1.54 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     0 RPM  (min =    0 RPM)
fan2:                  1962 RPM  (min =    0 RPM)
fan3:                  1034 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
fan5:                     0 RPM  (min =    0 RPM)
fan6:                  5252 RPM  (min =    0 RPM)
fan7:                  3146 RPM  (min =    0 RPM)
SYSTIN:                 +28.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = CPU diode
CPUTIN:                 +37.0°C  (high = +115.0°C, hyst = +90.0°C)  sensor = thermistor
AUXTIN0:                +39.0°C  (high = +115.0°C, hyst = +90.0°C)  sensor = thermistor
AUXTIN1:                +31.0°C    sensor = thermistor
AUXTIN2:                +46.0°C    sensor = thermistor
AUXTIN3:                 -3.0°C    sensor = thermistor
SMBUSMASTER 0:          +54.5°C  
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  
PCH_CHIP_TEMP:           +0.0°C  
PCH_CPU_TEMP:            +0.0°C  
PCH_MCH_TEMP:            +0.0°C  
Agent0 Dimm0:            +0.0°C  
TSI0_TEMP:              +54.9°C  
pwm1:                      128%  (mode = pwm)
pwm2:                      102%  (mode = pwm)
pwm3:                       70%  (mode = pwm)
pwm4:                      122%  (mode = pwm)
pwm5:                      122%  (mode = pwm)
pwm6:                      128%  (mode = pwm)
pwm7:                       54%  (mode = pwm)
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +55.4°C  

[StianNOR]

Damn for me the temp tab isent even showing in the overwiev what have i done wrong LOL One of the features i realy wanted.