Repository navigation
TrunkDeck 1.7.5 beta
Pre-releaseThe full list of changes is in TrunkDeck-1.7.5-changes.txt, attached on this page and included in the download next to START-HERE.txt.
This is a beta. TrunkDeck 1.7.4 stays the regular release. The main download link is unchanged.
What's new in 1.7.5 beta
The scanner display is updated, and TrunkDeck learns P25 Phase 1 radio names from the air.
Display
- Display only (the header button, or Ctrl+D) drops the title bar and shows just the big scanner display. Drag the panel to move it. Drag an edge or a corner to resize it. The display grows with the window. Double-click the panel, press Esc, or press Ctrl+D to bring the full window back. A double-click on a touch button does not.
- Right-click the display for Exit Display-Only, Always on top, Mute speaker, Minimize to tray, and Close TrunkDeck. The window's size, place, and Always on top are remembered.
- The close button and minimize button can each be set to Quit, the system tray, or Display only. The tray menu can also open Display only.
- Large buttons sit inside the bottom of the display: Mute all, Mute talkgroup, Hold, and Muted list. Mute all silences this PC only. Calls are still decoded, logged, recorded, and streamed. Mute talkgroup mutes the talkgroup on the glass, or the latest call if the display is idle, and lists it so you can tap the name to unmute it. Hold stays on the talkgroup that is on the air until you tap it again, and is not remembered the next time TrunkDeck opens. These buttons are only on Display only.
- While a call is on the glass, that talkgroup's colour from the Color column is used for its name and number. The same colour is used on the Monitor, Display only, and the home-network page.
- A favourite is marked with a yellow FAV outline.
- The signal meter's lit bars stay amber. While TrunkDeck is scanning, the control channel on the display shows the meter and a level in dB.
- The bottom row shows the channel, the frequency, the call time or the last call, and the event.
- Black or None draws no coloured rim. Any other border colour is used.
Over-the-air radio names
-
A standard P25 user-alias message in a voice frame is still saved.
-
A Motorola talker alias is now decoded too. Those names arrive as a short series of link-control words, often in the terminator at the end of a transmission. TrunkDeck reassembles the series, checks it, and saves the name only when the check passes.
-
The radio's own ID is inside the message, so the name can be saved even if the call has already ended.
-
The name is stored as an over-the-air name in that system's radios.csv and shown as NAME (ID).
-
An over-the-air name replaces a name you typed or imported.
-
Phase 2 talker aliases are not decoded.
-
A DMR talker alias is still only written to the log. It is not saved.
-
Analog FM with CTCSS
New in this beta. It has only been tested on synthetic signals, not on a real radio system.
On the Systems page, choose Analog FM (conventional, CTCSS) as the kind.
Type the channels, separated by commas. If a channel uses a CTCSS (PL) tone, add it after a colon, for example 154.1000:100.0 Fire, 155.4750.
Default tone sets the tone for every channel that does not have its own. Leave it empty to open on any carrier.
A channel with a tone opens only when it hears that tone. A different tone, or no tone, keeps it closed.
The start of a transmission is not cut off while TrunkDeck checks the tone. The tone is removed from the audio.
Each transmission is one call. It is logged, recorded if recording is on, and played on the speaker and feeds like any other call. Recordings are named by frequency, for example _TrunkDeck_FM_154.1000MHz.
Analog channels can be muted. Talkgroup list modes do not apply to them.
DCS codes are not supported. A channel with a DCS code listens with carrier squelch only, and the Engine log says so.
Wide FM and AM are not supported.
Set your dongle's ppm correction. A signal more than about 2 kHz off frequency will not decode well.
If something doesn't work, please report it on GitHub Issues.
DSD+ radio files
- Importing a DSDPlus.radios file now uses only the heard-name column (the P25 talker alias).
- The name you typed in DSD+ is ignored. A line with no heard name is skipped.
- The imported heard name is stored as an over-the-air name, so it replaces a name already saved for that radio.
- The file still has to match the system's WACN and System ID.
Also in this beta
- A system can be set to start by itself when TrunkDeck opens. The Monitor page counts down for 10 seconds, and Cancel stops it.
- The Engine page keeps a decoded-message log with the time, frequency, and message.
- The DMR decoder is included and is still marked untested. RadioReference still will not import a DMR system.
RadioReference
Set up from RadioReference works the same way as in 1.7.4. Sign in with your own RadioReference Premium username and password. The TrunkDeck app key is included in this download, so you do not paste a key. Each person uses their own account. TrunkDeck does not use the publisher's username or password.
Install
Unzip TrunkDeck-1.7.5-windows.zip, open TrunkDeck\windows, and double-click Install.bat. Your systems, talkgroups, settings, and recordings stay in %APPDATA%\TrunkDeck.