Repository navigation
Beta 1.3 RC2
Pre-release
Pre-release
Second release candidate for Beta 1.3. It builds on RC1 with fixes from your test reports, a reworked Radio HUD for lost links, and flight log replay.
New
- Reset parameters to default. The Parameters view has a Reset menu. "Reset changed values" puts every value that differs from the firmware default back to it, keeps calibration, sensor IDs, frame and serial ports unless you untick that, and sends nothing until Write to Flash. "Factory reset" erases all stored parameters and reboots, now on PX4 as well (calibration is kept there). (#158)
- Change Guided altitude and speed without picking the target again. Click the active go-to target on the map and the command card reopens at its current altitude. (#166)
- Flight replay. Play back a recorded flight: a telemetry log (.tlog) or the flight controller's own log (.bin), with play, pause, scrubbing and 0.5x to 16x speed. Start it from the Flight Replay tile on the welcome screen or from Settings.
- QGroundControl parameter files. .params files from QGroundControl now load, and you can save in that format by choosing the .params extension.
- Readable parameter values. Bitmask parameters show the names of the bits that are set next to the number, and enum values show their label.
- Guides tab. Reference shapes on the mission map (imported KML, KMZ, GeoJSON or SHP outlines, drawn areas, lines and points) are managed in their own tab: rename, colour, role (area, area of interest, no-fly zone, take-off / landing, point of interest, reference), show or hide, zoom to, plan a survey from, delete.
- Missions too large for the flight controller. When an upload is refused for lack of space, or the Flight Info panel warns about a very large mission, ArduDeck offers three ways to make it fit: let the flight controller follow the terrain (far fewer waypoints), split the survey into one flight per battery, or store missions on the SD card.
- Swarm instruments. A Swarm layout with a fleet matrix (leaders and wingmen), nearest-neighbour separation with a fleet-wide warning, fleet battery, Fleet Ops and a radar, each with a compact variant. ArduDeck offers to switch to it when two or more vehicles are connected. Right-click a leader on the map for the fleet menu: take off fleet, start mission, formation.
Fixed
- Radio HUD keeps your data when the link drops. The last position, heading, speed, altitude and battery stay on screen (greyed as stale) under a NO LINK bar that shows how long ago the last data came in, instead of the page being replaced. (#168)
- Radio HUD temperature over ELRS MAVLink no longer sits at 19 C. ELRS does not send the IMU temperature in that mode, so the tile now shows the barometer temperature it does send, labelled BARO TEMP. (#168)
- Radio HUD flight time can be reset: tap the Flight time tile while disarmed. (#168)
- Calibration status turns green after the reboot on its own, without reconnecting or switching pages. (#159)
- Selecting a vehicle in a fleet no longer makes the map jump to the leader or to home first.
- The altitude profile no longer shows false terrain collisions on terrain-following legs.
- Home Set now uses the ground elevation at the chosen spot, so altitudes above home are correct.
- Wingmen line up correctly under each leader when a fleet has two leaders.
- The collapse button of a docked instrument group is no longer hidden behind the Instruments button.
- Cargo instruments no longer reappear every time you switch layouts.
- The fleet context menu no longer overflows on the formation row.
Translations
- Simplified Chinese reviewed and completed by a native speaker (#161, thank you Li-T-1025). All new text in this release is translated into German, Ukrainian and both Chinese variants.
Please report anything you find on GitHub or the forum.