Repository navigation
Releases
Releases · rylos/synofile
v0.8.19
- In the transfer window the overall bar and the current file's bar move smoothly, like the speed chart, instead of jumping at each update. A new file, or its verification, starts its bar from zero.
- Administrators can now change and delete what file permissions would refuse, as in File Station: a folder on a USB disk formatted on a PC, a backup received from another machine. New files still belong to you, no owner changes, and read-only snapshots stay read-only.
- A copy with verification reaches 100%: skipped files, files moved by renaming and failed ones no longer count as still to verify, and the time left no longer counts them either.
- The transfer window: the speed is right again right after Resume; the steps no longer go back and forth during a verification, and a move with verification shows its Verify step; a conflict whose answer did not get through asks again instead of losing its buttons; Retry opens the job it started; a job where everything failed no longer reads "done" in the list and the notification; the warning sign of a failed job stays away once seen; the speed limit goes back if it could not be changed; Pause is gone while a conflict waits.
- Items per second (deletions) are shown with the right scale and decimals; the speed reads "—" when nothing runs.
- Accessibility: the window is named after its title, the progress is a progress bar for screen readers, the focus goes to Close when the job ends and to the first answer of a conflict; the list's cards open with the keyboard; less motion when the system asks for it.
- The chart takes the new colours when the theme changes, and long transfers keep their pauses in the chart.
Upgrading:
- Nothing to run: the package gives itself its permissions while it installs or upgrades. If you still use
synofile setupby hand, run it again: the binary now carriescap_dac_overrideandcap_fownertoo.
v0.8.18
- Verification after copying is no longer a setting that applies to every copy: it is a command for the transfer at hand. "Copy with verification to…" (Shift+F5), "Move with verification to…" (Shift+F6), "Paste with verification" (Ctrl+Shift+V) and the two "… here with verification" entries of the Alt-drop menu read every file back and compare it (xxHash3); a move with verification deletes the originals only after the check. Plain copy and move never verify, and a verified job says so when it ends (a move inside one volume is only a rename and has nothing to read back).
Upgrading:
- Nothing to run: the package gives itself its permissions while it installs or upgrades.
- The "Verify after copying" setting is no longer read: use the new commands for the copies you want checked.
v0.8.17
- The speed chart of a transfer moves smoothly: one point per real measurement, four a second, and the line walks from one to the next instead of jumping. The curve is rounder, pauses are shaded on the time axis, and the scale glides when it changes.
- The native binaries are built for speed instead of size, which matters most for SMB copies on small NASes. The package grows by about 1.4 MB.
Upgrading:
- Nothing to run: the package gives itself its permissions while it installs or upgrades.
v0.8.16
- The install helper of 0.8.15 crashed on older CPUs without AVX (for example the Celeron J3455 of a DS918+ or DS418play), so on those NASes
setupwas still needed. It is now built for any x86-64 CPU, and the build refuses a helper using newer instructions.
Upgrading:
- Nothing to run: the package gives itself its permissions while it installs or upgrades. On a NAS where 0.8.15 still needed
setup, this upgrade does it on its own.
v0.8.15
Use 0.8.16 instead: on CPUs without AVX (Celeron J3455 and similar) the 0.8.15 install helper crashes, and
setupis still needed.
- No more
setupover SSH after installing or upgrading: a small setuid helper, run by the package's install script, gives bin/synofile its permissions before the package starts. It sets them only on the binary built together with it (its SHA-256 is compiled in), copied to a new file owned by root. By Dave Russell.synofile setupstays for the case DSM does not run the helper; the interface still says so when the permissions are missing. - Space analysis: the name of the folder or file pointed at is written below the chart, where a long one fits, instead of cut short in its centre. The centre keeps the size and the share.
Upgrading:
- Nothing to run: from this version on, the package gives itself its permissions while it installs or upgrades, before it starts. That includes the upgrade from 0.8.14.
- If the interface ever says the permissions are missing, the fallback is still:
ssh admin@nas 'sudo /var/packages/synofile/target/bin/synofile setup && sudo /usr/syno/bin/synopkg restart synofile'v0.8.14
- The transfer window keeps its width with a long file name: the title ends in "…" (the whole name on hover) and the state stays in view.
- A cancelled transfer says "Cancelled" once, instead of "Cancelled: cancelled".
- The number on the transfers button shows from two transfers on: with one, the ring already says it. It still shows on a transfer waiting for an answer (paused, or a name conflict), and "!" after a failure.
Upgrading:
- Run
setupafter installing, as after every upgrade:
ssh admin@nas 'sudo /var/packages/synofile/target/bin/synofile setup && sudo /usr/syno/bin/synopkg restart synofile'v0.8.13
- Empty the Recycle Bin: from the right-click menu of a #recycle folder, from inside it, and from the menu of a shared folder in the sidebar. It asks first; what is in the bin is deleted for good.
- The #recycle folder's icon shows whether the bin is full or empty. The bin folder itself can no longer be moved to the bin or deleted: it is emptied instead.
- System folders in grey (Settings → Look, on by default): #recycle, #snapshot, #archive, @tmp, @ShareBin, $RECYCLE.BIN, System Volume Information, .Trash-*, .Spotlight-V100, .fseventsd, .TemporaryItems, lost+found. A colour given by hand wins; the bin keeps showing full or empty in that colour.
- The "backup" folder had a skull and crossbones by mistake: now it has the backup icon (a clock with an arrow).
- The "dev" folder's braces are both solid, instead of one outlined and one solid.
- Read-only snapshots (btrbk's, DSM's #snapshot) and what is inside them cannot be cut, moved, renamed or deleted: those items are no longer in the menu, and Del, F2 and Ctrl+X do nothing there. Copying out still works, and dragging out of a snapshot copies instead of moving.
- The same for DSM's own folders (#snapshot, #recycle, #archive, @tmp, @ShareBin): they cannot be cut, moved, renamed or deleted.
Upgrading:
- Run
setupafter installing, as after every upgrade:
ssh admin@nas 'sudo /var/packages/synofile/target/bin/synofile setup && sudo /usr/syno/bin/synopkg restart synofile'v0.8.12
- Administrators can open and read any folder, even one their user has no permission on: for example a btrbk backup received from a PC, owned by that PC's user, or a read-only snapshot. Preview, download and copying out work there; changing files still follows the user's own permissions. Run setup after installing (as always): it adds the read capability.
Upgrading:
- Run
setupafter installing, as after every upgrade. This time it also adds the read capability; without it SynoFile works as before, with the user's own read permissions:
ssh admin@nas 'sudo /var/packages/synofile/target/bin/synofile setup && sudo /usr/syno/bin/synopkg restart synofile'v0.8.11
-
Other DSM apps can open SynoFile at a folder: SYNO.SDS.AppLaunch("SYNO.SDS.SynoFile.Instance", { path: "/share/folder", select: "name" }). The window opens there, or, if already open, a new tab; select (optional) picks an item in it. The page takes ?path=…&select=… too.
-
The lock beside an encrypted shared folder is a line icon in the sidebar's grey, instead of the emoji in a box.
-
After upgrading, reload the DSM page once (Ctrl+Shift+R): DSM keeps an app's window loader in memory for the whole desktop session.
Upgrading:
- Run
setupafter installing, as after every upgrade:
ssh admin@nas 'sudo /var/packages/synofile/target/bin/synofile setup && sudo /usr/syno/bin/synopkg restart synofile'v0.8.10
- A columns view (Ctrl+3, or the third button beside list and grid): the folders above stand in columns on the left, each with the way down marked, and the folder under the cursor shows its contents on the right. Right arrow goes in, left arrow back up.
- The info panel of a photo, a video or a song shows its size in pixels, duration, video and audio codecs, bitrate and subtitles, and the photo's camera, lens, exposure, date taken and place (with a link to the map). Camera RAW files too.
- The right-click menu highlights the item under the mouse in the darker blue of selected rows, instead of a bright blue; Delete in a dark red.
Upgrading:
- Run
setupafter installing, as after every upgrade:
ssh admin@nas 'sudo /var/packages/synofile/target/bin/synofile setup && sudo /usr/syno/bin/synopkg restart synofile'