Skip to content

Releases

MLB The Show 26 for PC 0.1.5

Choose a tag to compare

@sam110411 sam110411 released this 17 Nov 08:58

MLB The Show 26 for PC 0.1.5: frame rates above 60, and the game's own code runs about a quarter faster.

Important

No game files are included. You need your own copy of MLB The Show 26 with the 1.0.20 update (the 1.0.15
update still works), dumped as NSP files from your own Nintendo Switch, and your Switch's prod.keys. This
download contains no game code, data or keys, and no tools to obtain them. The setup builds the game on your PC,
from your files, for your own use: don't share the installed folder. This is a fan project, not affiliated with or
endorsed by Sony Interactive Entertainment, San Diego Studio, MLB or Nintendo.

What's new

  • Frame rate limit. F1 → Display → Frame rate limit: 30 to 240 fps or your monitor's refresh rate (60 is the
    default). The game keeps its normal speed at any limit, and held buttons repeat at the same speed. Loading screens
    stay at 60. Above your monitor's refresh rate, set Presentation to Fast VSync or Off.
  • Faster game code. The game's translated code runs about a quarter faster: in a match at a 240 limit, about 110
    → 139 fps (Ryzen 5 5600X). At 60 fps that means fewer drops on slower processors.
  • Less overhead from the port on the game's main thread (controller reads, graphics calls).

Updating

Start MLBTS-Setup.exe (or wait for its launcher screen) and press Download and update. It rebuilds the game in a
few minutes and keeps your game files, saves and settings.

From 0.1.0: download MLBTS-Setup-0.1.5-windows.zip, unpack it, start MLBTS-Setup.exe and press Update.
You can delete the old setup folder afterwards.

Download

File For
MLBTS-Setup-0.1.5-windows.zip Windows 10 or 11, 64-bit

New install

  1. Unpack the zip anywhere and start MLBTS-Setup.exe. Windows may warn that the app is unrecognised (it is not
    signed): choose More info, then Run anyway.
  2. The setup looks for your keys and game files by itself: Ryujinx's and yuzu's folders, their game folders,
    Downloads, Desktop. Check what it found, pick what is missing, and press Install.
  3. It extracts the game's data (about 38 GB), translates the game's code and compiles it for your PC. That takes about
    10 minutes; you can cancel and continue later.
  4. Press Play. From then on, use the MLB The Show 26 shortcut on your desktop.

What you need

  • Windows 10 or 11, 64-bit; a CPU with AVX2 (Intel 4th generation / AMD Ryzen or newer)
  • A graphics card with Vulkan 1.3 and a current driver; DLSS needs an NVIDIA RTX card
  • 16 GB of RAM; about 40 GB of free disk space, plus 2 GB next to the setup while it builds

Known issues

  • Busy scenes can still drop below 60 fps on slower processors, batting views especially, though less than in
    0.1.4.
  • Some game screens hold their own 60 fps whatever the limit (the F1 menu row then says "the game holds 60 here").
  • The first matches stutter while the game prepares its shaders; they are kept, so it gets smoother as you play.
  • The setup takes NSP files only (no XCI or NSZ yet), and only game versions 1.0.20 and 1.0.15.

Reporting a problem

Open an issue and attach logs\mlb.log from the install folder (it is replaced each time the game starts, so copy it
right after the problem). For a setup problem, attach the newest logs\setup-*.log from the setup folder.

MLB The Show 26 for PC 0.1.4

Choose a tag to compare

@sam110411 sam110411 released this 16 Nov 03:40

MLB The Show 26 for PC 0.1.4: player models fixed on Intel Arc, smoother batting scenes, no developer tools running
in the background.

Important

No game files are included. You need your own copy of MLB The Show 26 with the 1.0.20 update (the 1.0.15
update still works), dumped as NSP files from your own Nintendo Switch, and your Switch's prod.keys. This
download contains no game code, data or keys, and no tools to obtain them. The setup builds the game on your PC,
from your files, for your own use: don't share the installed folder. This is a fan project, not affiliated with or
endorsed by Sony Interactive Entertainment, San Diego Studio, MLB or Nintendo.

What's new

  • Player models fixed on Intel Arc graphics cards (A770, B580 and others, #7).
    Pitchers drew without a torso in close-ups, and a huge grey shape covered part of the screen in the pitching view.
    The port checked where the game keeps its animated body data against a stricter rule than Intel's driver actually
    needs, and handed the game empty data instead. It now uses the driver's real rule.
  • Faster batting scenes. At the plate, in the Road to the Show screens between pitches and at each batter's
    walk-up, the port spent too long preparing each frame for the graphics card: much of that time went to bookkeeping
    for the game's small data updates, which grew much faster than their number. That work is now much cheaper, so
    these scenes run faster, and the pause at each walk-up is shorter. How much faster depends on your processor.
  • No developer tools running while you play. Earlier versions logged timing every second, sampled every thread
    for a profiler, and reacted to two debugging keys. All of that is now off:
    • F12 no longer saves debug images of the frame (players pressed it for a screenshot and got a long freeze).
    • F8 no longer writes a 42 MB memory dump with a beep.
    • The per-second timing lines are gone from logs\mlb.log; it still records errors and a frame-time summary
      every minute.

Updating

Start MLBTS-Setup.exe (or wait for its launcher screen) and press Download and update. It rebuilds the game in a
few minutes and keeps your game files, saves and settings.

From 0.1.0: download MLBTS-Setup-0.1.4-windows.zip, unpack it, start MLBTS-Setup.exe and press Update.
You can delete the old setup folder afterwards.

Download

File For
MLBTS-Setup-0.1.4-windows.zip Windows 10 or 11, 64-bit

New install

  1. Unpack the zip anywhere and start MLBTS-Setup.exe. Windows may warn that the app is unrecognised (it is not
    signed): choose More info, then Run anyway.
  2. The setup looks for your keys and game files by itself: Ryujinx's and yuzu's folders, their game folders,
    Downloads, Desktop. Check what it found, pick what is missing, and press Install.
  3. It extracts the game's data (about 38 GB), translates the game's code and compiles it for your PC. That takes about
    10 minutes; you can cancel and continue later.
  4. Press Play. From then on, use the MLB The Show 26 shortcut on your desktop.

What you need

  • Windows 10 or 11, 64-bit; a CPU with AVX2 (Intel 4th generation / AMD Ryzen or newer)
  • A graphics card with Vulkan 1.3 and a current driver; DLSS needs an NVIDIA RTX card
  • 16 GB of RAM; about 40 GB of free disk space, plus 2 GB next to the setup while it builds

Known issues

  • Busy scenes can still drop below 60 fps on slower processors, batting views especially: the port's work per
    frame there is lower now, but not yet low enough everywhere.
  • The first matches stutter while the game prepares its shaders; they are kept, so it gets smoother as you play.
  • Some images and lighting are still wrong or missing in places.
  • The setup takes NSP files only (no XCI or NSZ yet), and only game versions 1.0.20 and 1.0.15.

Reporting a problem

Open an issue and attach logs\mlb.log from the install folder (it is replaced each time the game starts, so copy it
right after the problem). For a setup problem, attach the newest logs\setup-*.log from the setup folder.

MLB The Show 26 for PC 0.1.3

Choose a tag to compare

@sam110411 sam110411 released this 15 Nov 22:33

MLB The Show 26 for PC 0.1.3: runs game version 1.0.20, the latest update.

Important

No game files are included. You need your own copy of MLB The Show 26 with the 1.0.20 update (the 1.0.15
update still works), dumped as NSP files from your own Nintendo Switch, and your Switch's prod.keys. This
download contains no game code, data or keys, and no tools to obtain them. The setup builds the game on your PC,
from your files, for your own use: don't share the installed folder. This is a fan project, not affiliated with or
endorsed by Sony Interactive Entertainment, San Diego Studio, MLB or Nintendo.

What's new

  • Game version 1.0.20 is supported, with its updated rosters, player faces and stadiums. Version 1.0.15 keeps
    working: the setup builds the version of the update file you give it, and prefers 1.0.20 when it finds both.
  • In 1.0.20 the game-modes menu tries to reach the online store. The port answers that there is no network, and the
    game carries on (online features stay out of scope).

Updating

  • Staying on 1.0.15: If you want to stay on update 1.0.15 you can skip this release.
  • Moving to 1.0.20: after updating the setup, choose Install somewhere else, pick the 1.0.20 update NSP,
    and pick your current install folder. The setup replaces the old version's game data (about 38 GB, roughly 10
    minutes) and rebuilds; your saves and settings stay. Your 1.0.15 save loads in 1.0.20, but once 1.0.20 has saved
    over it, 1.0.15 may no longer read it.
  • From 0.1.0: download MLBTS-Setup-0.1.3-windows.zip, unpack it, start MLBTS-Setup.exe and press
    Update (or install 1.0.20 as above).

You can delete the old setup folder afterwards.

Download

File For
MLBTS-Setup-0.1.3-windows.zip Windows 10 or 11, 64-bit

New install

  1. Unpack the zip anywhere and start MLBTS-Setup.exe. Windows may warn that the app is unrecognised (it is not
    signed): choose More info, then Run anyway.
  2. The setup looks for your keys and game files by itself: Ryujinx's and yuzu's folders, their game folders,
    Downloads, Desktop. Check what it found, pick what is missing, and press Install.
  3. It extracts the game's data (about 38 GB), translates the game's code and compiles it for your PC. That takes about
    10 minutes; you can cancel and continue later.
  4. Press Play. From then on, use the MLB The Show 26 shortcut on your desktop.

What you need

  • Windows 10 or 11, 64-bit; a CPU with AVX2 (Intel 4th generation / AMD Ryzen or newer)
  • A graphics card with Vulkan 1.3 and a current driver; DLSS needs an NVIDIA RTX card
  • 16 GB of RAM; about 40 GB of free disk space, plus 2 GB next to the setup while it builds

Known issues

  • The first matches stutter while the game prepares its shaders; they are kept, so it gets smoother as you play.
    On 1.0.20 many shaders are new, so this happens again once.
  • Some images and lighting are still wrong or missing in places.
  • The setup takes NSP files only (no XCI or NSZ yet), and only game versions 1.0.20 and 1.0.15.

Reporting a problem

Open an issue and attach logs\mlb.log from the install folder (it is replaced each time the game starts, so copy it
right after the problem). For a setup problem, attach the newest logs\setup-*.log from the setup folder.

MLB The Show 26 for PC 0.1.2

Choose a tag to compare

@sam110411 sam110411 released this 15 Nov 09:48

MLB The Show 26 for PC 0.1.2: renaming a player no longer crashes the game, and celebrations run smoother.

Important

No game files are included. You need your own copy of MLB The Show 26 with the 1.0.15 update, dumped as NSP
files from your own Nintendo Switch, and your Switch's prod.keys. This download contains no game code, data or
keys, and no tools to obtain them. The setup builds the game on your PC, from your files, for your own use: don't
share the installed folder. This is a fan project, not affiliated with or endorsed by Sony Interactive Entertainment,
San Diego Studio, MLB or Nintendo.

What's new

  • Changing a player's name works. After a name was typed and confirmed (for example in Road to the Show's player
    editor), the game checked it with the console's word filter, which the port did not answer yet, and closed. The
    name is now accepted as typed.
  • Smoother celebrations. When players celebrate on the field, the graphics card no longer stops and waits between
    each player's animation step and drawing, where that is safe.

Updating

  • From 0.1.1: start MLBTS-Setup.exe (or wait for its launcher screen) and press Download and update. It
    downloads this version, rebuilds the game in a few minutes and keeps your game files, saves and settings.
  • From 0.1.0: download MLBTS-Setup-0.1.2-windows.zip, unpack it, start MLBTS-Setup.exe and press
    Update. From then on the launcher updates for you.

You can delete the old setup folder afterwards.

Download

File For
MLBTS-Setup-0.1.2-windows.zip Windows 10 or 11, 64-bit

New install

  1. Unpack the zip anywhere and start MLBTS-Setup.exe. Windows may warn that the app is unrecognised (it is not
    signed): choose More info, then Run anyway.
  2. The setup looks for your keys and game files by itself: Ryujinx's and yuzu's folders, their game folders,
    Downloads, Desktop. Check what it found, pick what is missing, and press Install.
  3. It extracts the game's data (about 37 GB), translates the game's code and compiles it for your PC. That takes about
    10 minutes; you can cancel and continue later.
  4. Press Play. From then on, use the MLB The Show 26 shortcut on your desktop.

What you need

  • Windows 10 or 11, 64-bit; a CPU with AVX2 (Intel 4th generation / AMD Ryzen or newer)
  • A graphics card with Vulkan 1.3 and a current driver; DLSS needs an NVIDIA RTX card
  • 16 GB of RAM; about 40 GB of free disk space, plus 2 GB next to the setup while it builds

Known issues

  • The first matches stutter while the game prepares its shaders; they are kept, so it gets smoother as you play.
  • Some images and lighting are still wrong or missing in places.
  • The setup takes NSP files only (no XCI or NSZ yet), and only game version 1.0.15.

Reporting a problem

Open an issue and attach logs\mlb.log from the install folder (it is replaced each time the game starts, so copy it
right after the problem). For a setup problem, attach the newest logs\setup-*.log from the setup folder.

MLB The Show 26 for PC 0.1.1

Choose a tag to compare

@sam110411 sam110411 released this 15 Nov 07:36

MLB The Show 26 for PC 0.1.1: typing works, and the setup can update itself.

Important

No game files are included. You need your own copy of MLB The Show 26 with the 1.0.15 update, dumped as NSP
files from your own Nintendo Switch, and your Switch's prod.keys. This download contains no game code, data or
keys, and no tools to obtain them. The setup builds the game on your PC, from your files, for your own use: don't
share the installed folder. This is a fan project, not affiliated with or endorsed by Sony Interactive Entertainment,
San Diego Studio, MLB or Nintendo.

What's new

  • Typing no longer freezes the game. Wherever the game asks for text (for example the Road to the Show player
    search), a small "Enter text" box now opens over the game. Type and press Enter (or OK); Esc cancels. On a
    controller, A confirms and B cancels.
  • Updates from the launcher. Starting MLBTS-Setup.exe again checks GitHub for a newer version. When there is one,
    press Download and update: the new setup is downloaded, checked and unpacked next to the old one, and it rebuilds
    the game right away. Your game files, saves and settings stay.

Updating from 0.1.0

The 0.1.0 setup has no updater, so this one time: download MLBTS-Setup-0.1.1-windows.zip, unpack it, start
MLBTS-Setup.exe and press Update. It rebuilds the game in a few minutes; the game files are not needed again.
From 0.1.1 on, the launcher does this for you. You can delete the old setup folder afterwards.

Download

File For
MLBTS-Setup-0.1.1-windows.zip Windows 10 or 11, 64-bit

New install

  1. Unpack the zip anywhere and start MLBTS-Setup.exe. Windows may warn that the app is unrecognised (it is not
    signed): choose More info, then Run anyway.
  2. The setup looks for your keys and game files by itself: Ryujinx's and yuzu's folders, their game folders,
    Downloads, Desktop. Check what it found, pick what is missing, and press Install.
  3. It extracts the game's data (about 37 GB), translates the game's code and compiles it for your PC. That takes about
    10 minutes; you can cancel and continue later.
  4. Press Play. From then on, use the MLB The Show 26 shortcut on your desktop.

What you need

  • Windows 10 or 11, 64-bit; a CPU with AVX2 (Intel 4th generation / AMD Ryzen or newer)
  • A graphics card with Vulkan 1.3 and a current driver; DLSS needs an NVIDIA RTX card
  • 16 GB of RAM; about 40 GB of free disk space, plus 2 GB next to the setup while it builds

Known issues

  • The first matches stutter while the game prepares its shaders; they are kept, so it gets smoother as you play.
  • Some images and lighting are still wrong or missing in places.
  • The setup takes NSP files only (no XCI or NSZ yet), and only game version 1.0.15.

Reporting a problem

Open an issue and attach logs\mlb.log from the install folder (it is replaced each time the game starts, so copy it
right after the problem). For a setup problem, attach the newest logs\setup-*.log from the setup folder.

MLB The Show 26 for PC 0.1.0

Choose a tag to compare

@sam110411 sam110411 released this 15 Nov 06:34

MLB The Show 26 for PC 0.1.0: the first release.

Important

No game files are included. You need your own copy of MLB The Show 26 with the 1.0.15 update, dumped as NSP
files from your own Nintendo Switch, and your Switch's prod.keys. This download contains no game code, data or
keys, and no tools to obtain them. The setup builds the game on your PC, from your files, for your own use: don't
share the installed folder. This is a fan project, not affiliated with or endorsed by Sony Interactive Entertainment,
San Diego Studio, MLB or Nintendo.

Download

File For
MLBTS-Setup-0.1.0-windows.zip Windows 10 or 11, 64-bit

Install

  1. Unpack the zip anywhere and start MLBTS-Setup.exe. Windows may warn that the app is unrecognised (it is not
    signed): choose More info, then Run anyway.
  2. The setup looks for your keys and game files by itself: Ryujinx's and yuzu's folders, their game folders,
    Downloads, Desktop. Check what it found, pick what is missing, and press Install.
  3. It extracts the game's data (about 37 GB), translates the game's code and compiles it for your PC. That takes about
    10 minutes; you can cancel and continue later.
  4. Press Play. From then on, use the MLB The Show 26 shortcut on your desktop.

If you played on Ryujinx, the setup can copy your save (Road to the Show, Franchise, settings) into the PC version.

What you need

  • Windows 10 or 11, 64-bit; a CPU with AVX2 (Intel 4th generation / AMD Ryzen or newer)
  • A graphics card with Vulkan 1.3 and a current driver; DLSS needs an NVIDIA RTX card
  • 16 GB of RAM; about 40 GB of free disk space, plus 2 GB next to the setup while it builds

What works

Offline play: exhibition, Road to the Show, Franchise, menus and local saves, at 60 fps on the development PC (Ryzen 5
5600X, RTX 3060 Ti). Xbox and PlayStation controllers with rumble (the button prompts follow your controller), keyboard
and mouse. Settings in the game with F1: resolution and render scale, FSR 1, DLSS / DLAA, FXAA, shadows, HDR, frame
limit and more. F11 switches full screen.

Online play and Diamond Dynasty are not supported.

Known issues

  • The first matches stutter while the game prepares its shaders; they are kept, so it gets smoother as you play.
  • Some images and lighting are still wrong or missing in places.
  • The setup takes NSP files only (no XCI or NSZ yet), and only game version 1.0.15.

Reporting a problem

Open an issue and attach logs\mlb.log from the install folder (it is replaced each time the game starts, so copy it
right after the problem). For a setup problem, attach the newest logs\setup-*.log from the setup folder.