Skip to content

Releases

Tributary v0.15.0

Choose a tag to compare

@github-actions github-actions released this 19 Nov 02:44
9ce1f0d

A pull request's files in the app: beside it, their changes over it with its review comments at their lines, and from a fork too.

New

  • A pull request's files: while a pull request is open, the details panel beside it lists the files it changes, as a list or a tree, with a filter for a long list. Click one to see its changes over the pull request, with the way back to it at the start of their header (Esc goes back too), and [ and ] step through its files. If its commits aren't in your repository yet, Fetch its commits brings them from GitHub or GitLab, even when its branch is on someone's fork. See its changes is gone from the pull request's buttons: its files are beside it now.

    A pull request open with its three files beside it; one's changes open over it, and the way back at the start of their header returns to the pull request

  • Review comments: in a pull request's file's changes, each review thread is under the line it's on, with its replies and Reply. The number beside the line hides the thread and shows it again. Comments on lines that have changed since they were written are above the changes, with the lines they were about. In the list of files, a file with comments says how many.

    A file's changes with a comment and its reply under the line they're on; the number beside the line hides them and shows them again, and a reply is written and sent

Fixes

  • Esc with a commit's changes open under a pull request closed both. It now closes only the one on top, and a second Esc closes the other.
  • The "Owned by" and "Git LFS" chips above a file's changes had their words a little low. They're in the middle now, as the other chips' are.

Installing

  • macOS: the .dmg, one app for Apple Silicon and Intel. Open it and drag Tributary to Applications.
  • Windows: the _x64-setup.exe, or the _arm64-setup.exe for Windows on ARM (like a Snapdragon laptop). Agree to the terms and click Install, or choose Custom install to install it for everyone on the PC or in another folder.
  • Linux: the _amd64.AppImage, or the _aarch64.AppImage for 64-bit ARM (like a Raspberry Pi 4 or 5 with a 64-bit system). Make it executable (chmod +x Tributary_*.AppImage, or in the file's Properties) and open it. It runs on most distributions from 2022 on, like Ubuntu 22.04 and newer. It's less tested than the Mac and Windows versions: reports and fixes are welcome.

Tributary needs git, and Git LFS for repositories that use it. After this, it updates itself.

The installers aren't code-signed yet, so the first launch on a Mac or Windows needs one extra step:

  • macOS, "Tributary Not Opened": click Done, then open System Settings → Privacy & Security, scroll down to Security and click Open Anyway next to Tributary. Open it again and choose Open Anyway. On macOS 14 and earlier, you can instead Control-click the app in Applications and choose Open.
  • macOS, "is damaged" (or it still won't open): move it to Applications and run xattr -cr /Applications/Tributary.app once in Terminal.
  • Windows: if SmartScreen warns you, choose More info → Run anyway.

It's only needed once: the updates Tributary installs itself open straight away.

Tributary v0.15.0-beta.8

Pre-release

Choose a tag to compare

@github-actions github-actions released this 19 Nov 02:07
a2298e7

A beta of what's coming, built from develop. Tributary offers it to people who get beta versions (About Tributary → Get beta versions). It may have rough edges: tell us if something's wrong.

What's Changed

  • Write the 0.15.0 release notes, with two recordings by @shikoko in #278
  • Remove a debug line from finding the shell's PATH by @shikoko in #279

Full Changelog: v0.15.0-beta.6...v0.15.0-beta.8

Tributary v0.15.0-beta.6

Pre-release

Choose a tag to compare

@github-actions github-actions released this 18 Nov 17:32
3b1ce49

A beta of what's coming, built from develop. Tributary offers it to people who get beta versions (About Tributary → Get beta versions). It may have rough edges: tell us if something's wrong.

What's Changed

  • Show a pull request's review comments at their lines by @shikoko in #277

Full Changelog: v0.15.0-beta.5...v0.15.0-beta.6

Tributary v0.15.0-beta.5

Pre-release

Choose a tag to compare

@github-actions github-actions released this 18 Nov 17:13
3f60d38

A beta of what's coming, built from develop. Tributary offers it to people who get beta versions (About Tributary → Get beta versions). It may have rough edges: tell us if something's wrong.

What's Changed

  • Fetch a pull request's own commits, from a fork too by @shikoko in #276

Full Changelog: v0.15.0-beta.4...v0.15.0-beta.5

Tributary v0.15.0-beta.4

Pre-release

Choose a tag to compare

@github-actions github-actions released this 18 Nov 16:39
aceb41a

A beta of what's coming, built from develop. Tributary offers it to people who get beta versions (About Tributary → Get beta versions). It may have rough edges: tell us if something's wrong.

What's Changed

  • Headline the website "Git, beautifully clear." by @shikoko in #272
  • Shorten the website's hero to one line under the headline by @shikoko in #273
  • Name Tributary in the website's hero, and tick what it's free of by @shikoko in #274
  • Show a pull request's files beside it, and their changes over it by @shikoko in #275

Full Changelog: v0.14.0...v0.15.0-beta.4

Tributary v0.14.0

Choose a tag to compare

@github-actions github-actions released this 17 Nov 19:19
b936cd6

Search everything at once, your SSH keys in Settings, pull requests and issues in the sidebar, and pictures inside text files shown as pictures.

New

  • Search everything: the search box looks in commit messages (every line, not only the first), authors, branches and tags, commit ids, files and code at once, across the whole history. What it finds is listed by kind beside the history, in the sidebar's place, three of each with Show all. A commit found goes to it in the history; an author or a file lists their commits. To search one kind alone, choose it in the menu at the start of the search box, or type message:, author:, branch:, tag:, hash:, file: or code: before the words.

    Typing "export" lists the messages, branches, files and code that mention it beside the history, and a message found goes to its commit

  • SSH keys in Settings: Settings → SSH keys lists the keys in your ~/.ssh folder with their kind and fingerprint. Copy public key copies the half that GitHub or GitLab asks for, and the eye button shows it. Check with GitHub says whether GitHub knows each key, and as which account. With no key yet, three steps make one (Ed25519, with a passphrase if you want one), add it to GitHub and check that it works. Only the public halves are read.

    Settings, SSH keys: a key's name, kind and fingerprint; the eye button shows its public half and hides it again

  • Pull requests and issues in the sidebar: the sidebar lists the repository's open pull requests (or GitLab merge requests), each coloured by its checks, and a click opens one in the app. Under them are your open issues from the repository's issue tracker (Jira, Linear, GitHub or GitLab), and a click opens one in the browser. The button beside the sidebar's filter switches each of the sidebar's sections off or on, and so does Settings → Appearance → Sidebar. The filter finds pull requests and issues too.

    The sidebar's open pull requests and issues; the menu beside the filter switches Issues off, then on again

  • Pictures inside text files: a picture written into a text file (a base64 data: URL in CSS, HTML or JSON, or an image in a Jupyter notebook) is folded into a small label with its type and size, instead of a long line of letters. Under a line where a picture changed, its before and after are shown, with Compare for the full comparison. SVG files open as pictures, with the same ways to compare them as other pictures (side by side, swipe, onion skin and changed pixels), and Picture | Text shows their lines.

    A stylesheet's icons, written into it as base64, shown as pictures under their lines and compared before and after; then an SVG logo shown as a picture

Better

  • Bisect is easier to find, in Repository → History → Find What Broke (Bisect)… and the command palette. It offers the tags before the checked-out commit as the one that worked, newest first, then the 30 commits before it. In a commit's right-click menu, bisecting has a target for an icon instead of a magnifying glass, which looked like search.
  • The search box starts where the history starts, right above it, and follows the sidebar as it's resized or hidden. The menu of kinds in it is as wide as the kind chosen.

Fixes

  • Git LFS installed with Homebrew or Nix wasn't found on a Mac when Tributary was opened from the Finder or the Dock, and hooks couldn't find the programs they run. Tributary now finds programs where a terminal would: it asks your login shell for its PATH, and also looks where Nix, Homebrew and MacPorts put them.
  • Searching while a pull request was open (or a commit's checks, the team view or a file's changes) searched the history behind it, out of sight. A search now closes what's over the history, so its matches can be seen.
  • A push stopped by a pre-push hook left out what the hook printed, the part that says what to fix. It's now in the error, including lines like "Tests: 3 failed", which used to be dropped as if they were git's progress counts.
  • Esc didn't always close a right-click menu on a Mac. It now does, wherever the focus is.

Installing

  • macOS: the .dmg, one app for Apple Silicon and Intel. Open it and drag Tributary to Applications.
  • Windows: the _x64-setup.exe, or the _arm64-setup.exe for Windows on ARM (like a Snapdragon laptop). Agree to the terms and click Install, or choose Custom install to install it for everyone on the PC or in another folder.
  • Linux: the _amd64.AppImage, or the _aarch64.AppImage for 64-bit ARM (like a Raspberry Pi 4 or 5 with a 64-bit system). Make it executable (chmod +x Tributary_*.AppImage, or in the file's Properties) and open it. It runs on most distributions from 2022 on, like Ubuntu 22.04 and newer. It's less tested than the Mac and Windows versions: reports and fixes are welcome.

Tributary needs git, and Git LFS for repositories that use it. After this, it updates itself.

The installers aren't code-signed yet, so the first launch on a Mac or Windows needs one extra step:

  • macOS, "Tributary Not Opened": click Done, then open System Settings → Privacy & Security, scroll down to Security and click Open Anyway next to Tributary. Open it again and choose Open Anyway. On macOS 14 and earlier, you can instead Control-click the app in Applications and choose Open.
  • macOS, "is damaged" (or it still won't open): move it to Applications and run xattr -cr /Applications/Tributary.app once in Terminal.
  • Windows: if SmartScreen warns you, choose More info → Run anyway.

It's only needed once: the updates Tributary installs itself open straight away.

Tributary v0.14.0-beta.22

Pre-release

Choose a tag to compare

@github-actions github-actions released this 17 Nov 17:50
014f6cc

A beta of what's coming, built from develop. Tributary offers it to people who get beta versions (About Tributary → Get beta versions). It may have rough edges: tell us if something's wrong.

What's Changed

  • Write the 0.14.0 release notes, with four recordings by @shikoko in #269

Full Changelog: v0.14.0-beta.21...v0.14.0-beta.22

Tributary v0.13.0

Choose a tag to compare

@github-actions github-actions released this 16 Nov 22:52
3e9ab12

A branch renamed or deleted on the remote can be pointed at another one in a click, and the commit list shows one card on hover instead of two overlays.

New

  • When a branch's remote branch is gone: if it was renamed or deleted on the remote (master renamed to main, say), pulling or syncing it used to fail with git's "Your configuration specifies to merge with the ref… but no such ref was fetched". The message now says so plainly, and offers Use origin/main, the remote's main branch or one with the same name, as one click. Choose another… lists the remote's branches, the likely one first, with a box to rename your branch to match. Push master puts it back on the remote instead.

    Pull stops because origin has no master any more; Choose another lists origin's branches with origin/main first, and using it, renamed to main, fixes it

Fixes

  • Pointing at a branch's label in the commit list showed two overlays: the commit's card and the browser's tooltip. With the card on, it's the only one: what the label said (which branch, where it is, how far ahead or behind, double-click to check out) is at the card's top, and so is what the checks' dot, the pull request badge and the other labels say. The card also shows the author's email, and when the commit was made, when that isn't when it was written.

Installing

  • macOS: the .dmg, one app for Apple Silicon and Intel. Open it and drag Tributary to Applications.
  • Windows: the _x64-setup.exe, or the _arm64-setup.exe for Windows on ARM (like a Snapdragon laptop). Agree to the terms and click Install, or choose Custom install to install it for everyone on the PC or in another folder.
  • Linux: the _amd64.AppImage, or the _aarch64.AppImage for 64-bit ARM (like a Raspberry Pi 4 or 5 with a 64-bit system). Make it executable (chmod +x Tributary_*.AppImage, or in the file's Properties) and open it. It runs on most distributions from 2022 on, like Ubuntu 22.04 and newer. It's less tested than the Mac and Windows versions: reports and fixes are welcome.

Tributary needs git, and Git LFS for repositories that use it. After this, it updates itself.

The installers aren't code-signed yet, so the first launch on a Mac or Windows needs one extra step:

  • macOS, "Tributary Not Opened": click Done, then open System Settings → Privacy & Security, scroll down to Security and click Open Anyway next to Tributary. Open it again and choose Open Anyway. On macOS 14 and earlier, you can instead Control-click the app in Applications and choose Open.
  • macOS, "is damaged" (or it still won't open): move it to Applications and run xattr -cr /Applications/Tributary.app once in Terminal.
  • Windows: if SmartScreen warns you, choose More info → Run anyway.

It's only needed once: the updates Tributary installs itself open straight away.

Tributary v0.12.0

Choose a tag to compare

@github-actions github-actions released this 16 Nov 20:12
5ade3e3

Errors that say what happened in plain words, a way past someone else's commits when force pushing, and fixes for Sync and force push.

New

  • Errors in plain words: when git stops something, the message above the list says what happened, and why, in a sentence. Under What you can do, each button has a line saying what it does. A push git refused because someone pushed first, for example, offers Sync (get their commits, then push yours on top; nothing is lost) and Force push… (replace them). git's own message is still there, under Show git's message, with Copy. It covers the errors git gives most often: refused pushes, protected branches, files too big for GitHub, signing in, a host that can't be reached, changes in the way, and more.

    A refused push says what happened and what Sync and Force push would each do, and git's own message opens under it

  • Force push over someone else's commits: a force push stops if someone pushed to the branch since you last fetched, so their work isn't removed by mistake. It now says how many commits are in the way, and whose, and lists them, with Force push anyway… and Show them. The force push dialog has a box for it too: Also remove commits others pushed since you last fetched. What a force push replaces is kept in Repository → Restore.

    A force push stops for commits it hasn't fetched and lists them; Force push anyway opens the dialog with the box ticked, and the push replaces them

Fixes

  • Sync's error showed for a moment, then went away, as the repository reloaded after the fetch. An error now stays until you close it, or the next action runs.
  • Sync works when git is set to only fast-forward (pull.ff = only). It stopped on every branch with commits on both sides; it now puts your commits on top of what arrived, then pushes them.
  • A force push shows its progress, like any push: the dialog closes, and the progress bar counts the Git LFS files being uploaded, with Cancel.

Installing

  • macOS: the .dmg, one app for Apple Silicon and Intel. Open it and drag Tributary to Applications.
  • Windows: the _x64-setup.exe, or the _arm64-setup.exe for Windows on ARM (like a Snapdragon laptop). Agree to the terms and click Install, or choose Custom install to install it for everyone on the PC or in another folder.
  • Linux: the _amd64.AppImage, or the _aarch64.AppImage for 64-bit ARM (like a Raspberry Pi 4 or 5 with a 64-bit system). Make it executable (chmod +x Tributary_*.AppImage, or in the file's Properties) and open it. It runs on most distributions from 2022 on, like Ubuntu 22.04 and newer. It's less tested than the Mac and Windows versions: reports and fixes are welcome.

Tributary needs git, and Git LFS for repositories that use it. After this, it updates itself.

The installers aren't code-signed yet, so the first launch on a Mac or Windows needs one extra step:

  • macOS, "Tributary Not Opened": click Done, then open System Settings → Privacy & Security, scroll down to Security and click Open Anyway next to Tributary. Open it again and choose Open Anyway. On macOS 14 and earlier, you can instead Control-click the app in Applications and choose Open.
  • macOS, "is damaged" (or it still won't open): move it to Applications and run xattr -cr /Applications/Tributary.app once in Terminal.
  • Windows: if SmartScreen warns you, choose More info → Run anyway.

It's only needed once: the updates Tributary installs itself open straight away.

Tributary v0.11.0

Choose a tag to compare

@github-actions github-actions released this 16 Nov 02:10
def500f

See why a check failed without leaving Tributary, and what arrived while you were away.

New

  • Why a check failed: a failed check says Why?, in a commit's details and in a pull request's checks. Click it, or a failed job in the checks graph, to see the job's steps with the failed one marked, and the end of its log, scrolled to where it failed, with the errors in red. Copy log copies it, Open on GitHub opens the job's page, and Re-run job runs just that job again. It works with GitHub Actions and GitLab. On GitHub, you need to be signed in to see a log.

    A failed check's Why? opens its steps and the end of its log, with the errors in red, and closes again

  • Since you were last here: come back to a repository, and a line above the list says what arrived on main while you were away: how many new commits and who wrote them, the pull requests merged, and which of your locked files someone else changed. Your own commits aren't counted, and it stays one line however much arrived. Nothing moves until you click: the count goes to where you left off, which is also marked beside the scrollbar, and × puts the line away.

    Coming back three days later: the line says 6 new commits on main from Theo and Rosa, the mark beside the scrollbar says where you left off, and the count goes there

Fixes

  • Pointing at a mark beside the scrollbar no longer also opens the preview of the commit under the pointer, over the mark's card.

Installing

  • macOS: the .dmg, one app for Apple Silicon and Intel. Open it and drag Tributary to Applications.
  • Windows: the _x64-setup.exe, or the _arm64-setup.exe for Windows on ARM (like a Snapdragon laptop). Agree to the terms and click Install, or choose Custom install to install it for everyone on the PC or in another folder.
  • Linux: the _amd64.AppImage, or the _aarch64.AppImage for 64-bit ARM (like a Raspberry Pi 4 or 5 with a 64-bit system). Make it executable (chmod +x Tributary_*.AppImage, or in the file's Properties) and open it. It runs on most distributions from 2022 on, like Ubuntu 22.04 and newer. It's less tested than the Mac and Windows versions: reports and fixes are welcome.

Tributary needs git, and Git LFS for repositories that use it. After this, it updates itself.

The installers aren't code-signed yet, so the first launch on a Mac or Windows needs one extra step:

  • macOS, "Tributary Not Opened": click Done, then open System Settings → Privacy & Security, scroll down to Security and click Open Anyway next to Tributary. Open it again and choose Open Anyway. On macOS 14 and earlier, you can instead Control-click the app in Applications and choose Open.
  • macOS, "is damaged" (or it still won't open): move it to Applications and run xattr -cr /Applications/Tributary.app once in Terminal.
  • Windows: if SmartScreen warns you, choose More info → Run anyway.

It's only needed once: the updates Tributary installs itself open straight away.