Skip to content

Releases

PS5 In-Game Overlay v1.0.19

Choose a tag to compare

@github-actions github-actions released this 18 Oct 10:19

🎮 PS5 In-Game Overlay v1.0.19

Standalone in-game hardware telemetry overlay for jailbroken PlayStation 5 with real-time hardware monitoring and built-in Web configuration panel.

✨ Features

  • 12 Live Hardware Metrics:
    • FPS: Hardware Display Controller Engine scanout flip counter (/dev/dce)
    • CPU: Zen 2 Tctl core temperature (°C)
    • LOAD: CPU utilization (%)
    • CCLK: Zen 2 CPU core frequencies in MHz
    • GPU: AMD RDNA 2 SoC GPU temperature (°C)
    • GCLK: RDNA 2 GFXCLK clock in MHz
    • RAM: System memory usage (GB)
    • VRAM: Video memory usage (GB)
    • SSD: M.2 NVMe SSD expansion drive temperature (°C via SoC channel 2)
    • FAN: Blower fan duty cycle (%)
    • PWR: SoC APU power consumption in Watts
    • IP: PlayStation 5 local IPv4 address
  • Web Configuration Panel (Port 8585):
    • Full remote control via browser at http://<PS5_IP>:8585
    • Live preview, reorder metrics, custom colors (HEX/Picker), position & offset adjustments
    • Graceful overlay unloader to quit without restarting console
  • Persistent Config: Automatically saved to /data/overlay/config.ini

🚀 Quick Start

Send the ELF binary to your jailbroken PS5 via port 9020 or 9021:

nc -q0 <PS5_IP> 9021 < ps5-overlay-kus_v1.0.19.elf

Full Changelog: v0.0.18...v1.0.19

PS5 In-Game Overlay v1.0.18 (Full Telemetry & Web Control)

Choose a tag to compare

@github-actions github-actions released this 17 Oct 01:33

🎮 PS5 In-Game Overlay v1.0.18 — Full Telemetry & Web Control

Автономный внутриигровой оверлей мониторинга производительности и системной телеметрии в реальном времени для PlayStation 5 (Jailbreak) с управлением через веб-интерфейс.


🚀 Главные нововведения версии v1.0.18

  • 💾 Мониторинг температуры M.2 NVMe SSD (SSD XX°C):
    • Добавлено считывание температуры накопителя через прямой аппаратный сенсор SoC (канал 2 sceKernelGetSocSensorTemperature).
    • Если дополнительный M.2 диск не установлен или слот не используется, автоматически выводится статус N/A.
  • ⚡ Исправлено считывание частот и мощности (CCLK, GCLK, PWR):
    • Системные функции sceKernelGetSocClock, sceKernelGetSocPowerConsumption, sceKernelGetCpuCoreClock и sceKernelGetCpuFrequency теперь предварительно разрешаются загрузчиком с root-привилегиями и передаются в payload через структуру bootstrap.
    • Добавлена эскалация capabilities (ucred) для целевого процесса SceShellUI.
  • 🎯 Аппаратный счётчик FPS (/dev/dce):
    • Считывание реального фреймрейта напрямую через аппаратный контроллер дисплея PS5 без просадок и сбоев.
  • 🌐 Встроенная Web-панель настроек (порт 8585):
    • Настройка оверлея прямо с телефона или ПК по адресу http://<IP_ВАШЕЙ_PS5>:8585.
    • Индивидуальное включение/выключение каждой из 12 метрик.
    • Сортировка порядка отображения кнопками вверх/вниз (▲ / ▼).
    • Выбор цвета каждой метрики через цветовую палитру (Color Picker / HEX).
    • Настройка положения полосы (Сверху / Снизу, Слева / Центр / Справа, отступы X/Y).
    • Настройка размера шрифта, высоты полосы, цвета и прозрачности фона.
  • 🛑 Горячая выгрузка (Unload):
    • Возможность корректно завершить работу оверлея и освободить память прямо из веб-интерфейса без необходимости перезагружать консоль.
  • 💾 Постоянное сохранение настроек:
    • Конфигурация сохраняется в файл /data/overlay/config.ini и автоматически подгружается при каждом старте.

📊 Доступные метрики телеметрии (12 показателей):

  1. FPS — текущая частота кадров в секунду (Framerate).
  2. CPU — температура процессора AMD Zen 2 (Tctl).
  3. LOAD — общая загрузка процессора в процентах (CPU %).
  4. CCLK — рабочая частота ядер процессора (Zen 2 CPU Clock в МГц).
  5. GPU — температура видеочипа (SoC / GPU).
  6. GCLK — тактовая частота видеоядра (RDNA 2 GFXCLK в МГц).
  7. RAM — использование системной памяти (ОЗУ).
  8. VRAM — использование видеопамяти графического чипа.
  9. SSD — температура накопителя в слоте M.2 NVMe.
  10. FAN — скорость вращения кулера консоли в процентах.
  11. PWR — энергопотребление кристалла SoC APU в Ваттах.
  12. IP — локальный сетевой IPv4-адрес PlayStation 5.

📥 Установка и запуск

  1. Запустите эксплойт на вашей PS5 (с поддержкой ELF-загрузчика на порту 9021 или 9020).
  2. Отправьте файл ps5-overlay-kus_v1.0.18.elf на консоль:
    nc -q0 <IP_PS5> 9021 < ps5-overlay-kus_v1.0.18.elf
  3. После появления уведомления "PS5 Overlay Loaded successfully!" откройте в браузере страницу настроек:
    http://<IP_PS5>:8585
    

PS5 Hardware Overlay v1.0.15

Choose a tag to compare

@github-actions github-actions released this 21 Sep 18:58

🎮 PS5 Hardware Overlay v1.0.15

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in v1.0.15

  • 🧹 Streamlined Architecture (Pure In-Game Overlay):
    • Completely removed embedded HTTP web server, sockets, and heavy HTML template assets.
    • Minimal footprint, zero background network listening, and maximum stability.
  • ⚡ Real-Time In-Game FPS Counter:
    • Hardware scanout flip delta sampling via Display Controller Engine (/dev/dce, ioctl 0x80308217).
    • Native fallback support for OnionHEN seqlock sampler (/system_tmp/fps_sample).
    • Dedicated FPS badge in gold/yellow (#FFEB3B) with live framerate (60 / 120 / --).
    • Configurable via show_fps = true in /data/ps5_overlay/config.ini.
  • 🖥️ Native On-Screen In-Game HUD:
    • Automatically injected into SceShellUI via ptrace (with kstuff active).
    • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
    • Sleek translucent 2D bar at top of screen with color-coded metrics:
      • FPS (Gold/Yellow #FFEB3B)
      • CPU (Green #66FF66)
      • GPU (Purple #B366FF)
      • RAM (Orange #FFB34D)
      • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
    • Recurring notification popups completely disabled to protect your gameplay immersion.
    • Only a single silent startup toast confirms the overlay is loaded.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
    nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  3. A single notification appears confirming the overlay is active.
  4. Launch any game — the hardware HUD bar appears at the top of the screen!

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: v1.0.14...v1.0.15

PS5 Hardware Overlay v1.0.14

Choose a tag to compare

@github-actions github-actions released this 20 Sep 23:12

🎮 PS5 Hardware Overlay v1.0.14

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in v1.0.14

  • ⚡ Real-Time In-Game FPS Counter:
    • Hardware scanout flip delta sampling via Display Controller Engine (/dev/dce, ioctl 0x80308217).
    • Native fallback support for OnionHEN seqlock sampler (/system_tmp/fps_sample).
    • Dedicated FPS badge in gold/yellow (#FFEB3B) with live framerate (60 / 120 / --).
    • Dedicated Frame Rate card on Web HUD dashboard and live floating /bar.
    • Configurable via show_fps = true in /data/ps5_overlay/config.ini.
  • 🖥️ Native On-Screen In-Game HUD:
    • Automatically injected into SceShellUI via ptrace (with kstuff active).
    • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
    • Sleek translucent 2D bar at top of screen with color-coded metrics:
      • FPS (Gold/Yellow #FFEB3B)
      • CPU (Green #66FF66)
      • GPU (Purple #B366FF)
      • RAM (Orange #FFB34D)
      • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
    • Recurring notification popups completely disabled to protect your gameplay immersion.
    • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
    • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
    • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
    nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  3. A single notification appears confirming the overlay is active.
  4. Launch any game — the hardware HUD bar appears at the top of the screen!
  5. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: v1.0.13...v1.0.14

PS5 Hardware Overlay v1.0.13

Choose a tag to compare

@github-actions github-actions released this 20 Sep 22:54

🎮 PS5 Hardware Overlay v1.0.13

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
    • Automatically injected into SceShellUI via ptrace (with kstuff active).
    • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
    • Sleek translucent 2D bar at top of screen with color-coded metrics:
      • CPU (Green #66FF66)
      • GPU (Purple #B366FF)
      • RAM (Orange #FFB34D)
      • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
    • Recurring notification popups completely disabled to protect your gameplay immersion.
    • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
    • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
    • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
    nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  3. A single notification appears confirming the overlay is active.
  4. Launch any game — the hardware HUD bar appears at the top of the screen!
  5. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: v1.0.12...v1.0.13

PS5 Hardware Overlay v1.0.12

Choose a tag to compare

@github-actions github-actions released this 20 Sep 22:43

🎮 PS5 Hardware Overlay v1.0.12

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
    • Automatically injected into SceShellUI via ptrace (with kstuff active).
    • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
    • Sleek translucent 2D bar at top of screen with color-coded metrics:
      • CPU (Green #66FF66)
      • GPU (Purple #B366FF)
      • RAM (Orange #FFB34D)
      • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
    • Recurring notification popups completely disabled to protect your gameplay immersion.
    • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
    • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
    • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
    nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  3. A single notification appears confirming the overlay is active.
  4. Launch any game — the hardware HUD bar appears at the top of the screen!
  5. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: v1.0.11...v1.0.12

PS5 Hardware Overlay v1.0.11

Choose a tag to compare

@github-actions github-actions released this 20 Sep 22:31

🎮 PS5 Hardware Overlay v1.0.11

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
    • Automatically injected into SceShellUI via ptrace (with kstuff active).
    • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
    • Sleek translucent 2D bar at top of screen with color-coded metrics:
      • CPU (Green #66FF66)
      • GPU (Purple #B366FF)
      • RAM (Orange #FFB34D)
      • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
    • Recurring notification popups completely disabled to protect your gameplay immersion.
    • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
    • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
    • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
    nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  3. A single notification appears confirming the overlay is active.
  4. Launch any game — the hardware HUD bar appears at the top of the screen!
  5. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: v1.0.10...v1.0.11

PS5 Hardware Overlay v1.0.10

Choose a tag to compare

@github-actions github-actions released this 20 Sep 22:05

🎮 PS5 Hardware Overlay v1.0.10

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
    • Automatically injected into SceShellUI via ptrace (with kstuff active).
    • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
    • Sleek translucent 2D bar at top of screen with color-coded metrics:
      • CPU (Green #66FF66)
      • GPU (Purple #B366FF)
      • RAM (Orange #FFB34D)
      • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
    • Recurring notification popups completely disabled to protect your gameplay immersion.
    • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
    • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
    • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
    nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  3. A single notification appears confirming the overlay is active.
  4. Launch any game — the hardware HUD bar appears at the top of the screen!
  5. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: v1.0.9...v1.0.10

PS5 Hardware Overlay v1.0.9

Choose a tag to compare

@github-actions github-actions released this 20 Sep 21:40

🎮 PS5 Hardware Overlay v1.0.9

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
    • Automatically injected into SceShellUI via ptrace (with kstuff active).
    • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
    • Sleek translucent 2D bar at top of screen with color-coded metrics:
      • CPU (Green #66FF66)
      • GPU (Purple #B366FF)
      • RAM (Orange #FFB34D)
      • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
    • Recurring notification popups completely disabled to protect your gameplay immersion.
    • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
    • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
    • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
    nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  3. A single notification appears confirming the overlay is active.
  4. Launch any game — the hardware HUD bar appears at the top of the screen!
  5. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: v1.0.8...v1.0.9

PS5 Hardware Overlay v1.0.8

Choose a tag to compare

@github-actions github-actions released this 20 Sep 21:01

🎮 PS5 Hardware Overlay v1.0.8

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
    • Automatically injected into SceShellUI via ptrace (with kstuff active).
    • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
    • Sleek translucent 2D bar at top of screen with color-coded metrics:
      • CPU (Green #66FF66)
      • GPU (Purple #B366FF)
      • RAM (Orange #FFB34D)
      • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
    • Recurring notification popups completely disabled to protect your gameplay immersion.
    • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
    • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
    • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
    nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  3. A single notification appears confirming the overlay is active.
  4. Launch any game — the hardware HUD bar appears at the top of the screen!
  5. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: v1.0.7...v1.0.8