Skip to content

Releases

v0.4.0 (beta): walls, no-go zones + zone size fix

Choose a tag to compare

@spikey1965 spikey1965 released this 12 Nov 17:53
95afb82

Fixed

  • Zones came out four times too big on newer Home Assistant (it now draws crosshair lines through the robot on the map, which threw off the card's scale). The card now uses the map's real scale (12.5 mm per pixel) and finds the robot's centre more accurately. Press Zone once with the robot standing still so it lines the map up again.

New

  • Walls and no-go zones. Rooms / Zone / Wall / No-go tool bar above the rooms. Tap the map for a 1 m wall or box (or drag to draw one), drag it to move it, drag the white dots to resize or turn it, then Save to robot. Up to 10 of each.
  • Zone: tap the map for a 1 m box.
  • no_go: false hides Wall and No-go and brings the plain Zone button back.

Good to know

  • Saving replaces all walls and no-go zones on the robot, including any drawn in the Roborock app (Home Assistant can't read those). The card remembers what it saved per Home Assistant user.
  • Not for the Q7 family (no zone commands in Home Assistant).
  • Tested on a Qrevo S.

v0.3.0 (beta): cleaning pattern

Pre-release

Choose a tag to compare

@spikey1965 spikey1965 released this 10 Nov 13:30
08c7ec0

New: cleaning pattern.

  • Standard, Deep, Deep+ or Fast: the same setting as the route in the Roborock app. It's now its own row under Suction and always on show; it greys out while the robot only hoovers, because the pattern is for mopping.
  • The schedule: each step that mops has a Cleaning pattern choice too, and the programme list shows it (for example "Mop Kitchen · Deep+"). Existing programmes keep working as before until you edit and save them.
  • Shown for robots whose Home Assistant integration has a mop mode setting (Qrevo, Saros, S-series and others).

Updating by hand: replace roborock-buddy-card.js and change the resource to ?v=0.3.0.

Guide and live demo: https://mymediabuild.uk/home-assistant-roborock-buddy-card/

v0.2.0 (beta): zone cleaning

Pre-release

Choose a tag to compare

@spikey1965 spikey1965 released this 08 Nov 11:22
36ff379

New: clean just a zone.

  • Press Zone (next to the Clean button), drag a box over the bit you want cleaned, then press Clean. Up to five boxes at once; the × on a box removes it.
  • No setup: the card finds the robot on Home Assistant's map and asks it where it is, so your boxes line up with the robot's own map. Press Zone while the robot is standing still (on its dock is fine).
  • Tested on a real Qrevo S; should work on the S, Qrevo, Saros and other Roborocks that Home Assistant can send zones to. The Q7 family can't clean zones from Home Assistant, so the button is hidden there.
  • zones: false hides the Zone button.

Updating by hand: replace roborock-buddy-card.js and change the resource to ?v=0.2.0.

Guide and live demo: https://mymediabuild.uk/home-assistant-roborock-buddy-card/

v0.1.1 (beta): blinking eyes

Pre-release

Choose a tag to compare

@spikey1965 spikey1965 released this 31 Oct 16:53
4d869d0

The cartoon robot comes to life a bit more:

  • Its eyes blink every few seconds and glance around now and then
  • While it's out cleaning, its eyes look the way it's heading
  • Bigger eyes on the out-of-dock picture

Nothing else changes, and no settings change. If you've turned on "reduce motion" on your device, the eyes stay still.

Guide and live demo: https://mymediabuild.uk/home-assistant-roborock-buddy-card/

v0.1.0 (beta)

v0.1.0 (beta) Pre-release
Pre-release

Choose a tag to compare

@spikey1965 spikey1965 released this 31 Oct 11:29
85a3603

First public release (beta).

A friendly dashboard card for Roborock robot vacuums on Home Assistant's own Roborock integration:

  • A cartoon of your robot and its dock that follows what it's doing (charging, cleaning, heading home, stuck, washing and drying mops, emptying the bin)
  • Four robot types, picked for you: mop-wash dock, self-empty dock, charger only, no dock
  • Name your robot from a list of ideas, or type your own
  • Live map with its empty border trimmed, tap rooms to clean, Clean all / Pause / Resume, Dock and Find
  • Clean with, suction, mop water and mop route as icon buttons
  • Dock status and brush, filter, sensor and dock strainer life
  • A schedule on the card: programmes of steps, saved as normal Home Assistant automations

Tested on a Roborock Qrevo S. The Q7 M5 family is supported in the code but not yet tried on a real one.

Guide and live demo: https://mymediabuild.uk/home-assistant-roborock-buddy-card/

Please report anything that doesn't work in Issues.