Repository navigation
MANIFOLD 1.0.6
MIDI out
- Sends what MANIFOLD plays over USB and Bluetooth MIDI: the layers' notes, the keys, the drums (General MIDI kit or pitched), the four knobs as CC 21–24, and the clock.
- Turns on only while a USB or Bluetooth MIDI connection is made; off otherwise.
- At most 24 new notes per second per layer (32nd notes at 180 BPM).
- MPE: each note on its own channel, pitch-bent to its exact just-intonation pitch (channel 1 master, 2–15 notes, drums on 16).
- Latch and Panic never leave notes hanging on the receiver.
- Setup → MIDI out pages: what to send, channels, drum notes.
Dry patches and the Shape knob
- A quarter of rolls (and REC taps) are Dry: fuzz, filter, delay and reverb start set to nothing. They aren't run, so the FM-1 has more headroom, but you can turn any of them up on its FX page and it works normally.
- On a Dry patch the Space knob becomes Shape:
- the drums' envelopes as a kit: kick and tom bloom long, snare and hat stay tight and snappy;
- the layers' contour;
- the voices' pluck, width and spin;
- the duck and the compressor's attack.
- Shape covers a wide range while the drums' loudness stays roughly even.
- FX → Output → Space knob (Effects / Shape) switches the knob on any patch.
- Pump moves to Groove on Dry patches.
Drums
- Drum notes, Follow … Fixed (Drums page, on Groove): from drums riding the motion's notes to a fixed kit at 808-style pitches (kick 45–76 Hz, tom 90–185, snare 200–320, hat at the top), each with its own body, crack or sizzle. Rolled per style.
- A tighter kit: snare −8 dB, tom −6 dB, hat −13 dB under the kick; closed hats (20–60 ms) and shorter snares.
- Drum levels now ride Groove (±4 dB) and layer levels ride Motion (±3 dB, opposite) in every patch.
Bluetooth audio
- Devices that offer AAC or their own codec first now connect with SBC.
- A device with an old pairing to the FM-1 is answered correctly; a re-pairing that stalls is given up after 8 s, and the crash report says why.
Also
- Any effect set to do nothing is skipped, in every patch.
Compatibility
- Patches from 1.0.5 load as they were. Patches saved by 1.0.6 can't be read by 1.0.5 (they show as Empty), so stay on 1.0.6 once you've saved with it.
Install
Use the web installer at https://stets43.github.io/Manifold/ (Chrome or Edge), or flash manifold-1.0.6.fwsc with fm1-base's tools/fm1_install.py.