Repository navigation
PlayThing 0.1.0-beta
Pre-releaseUse 0.1.0-beta.2. The flash tool of 0.1.0-beta stops on Car Things with the newer Spotify U-Boot ("the partition table is still the superbird-tool one"). The images are the same.
Beta. I tested it on one Car Thing only (S905D2, 512 MiB RAM, ST7701S panel). Known issues: docs/known-issues.md. Use it at your own risk: read the warning in the README.
Android 9 on the Spotify Car Thing as a wired Apple CarPlay receiver, with DiPlay.
What you need
- A Spotify Car Thing whose stock software runs from slot A
- A USB-C hub with Power Delivery input and USB-A ports (tested: Anker 6-in-1), and a PD charger
- A USB-C cable, and a Mac or a Linux computer with Python 3.8 or later, git, and libusb (macOS:
brew install libusb). Windows is not supported.
First install
- Download
plaything-0.1.0-beta.zipbelow, unzip it, and open a terminal in the folderplaything-0.1.0-beta. - Disconnect the Car Thing. Hold presets 1 and 4 (the left and right ends of the top row), connect it directly to the computer, and release after about 3 seconds.
- Run
python3 flash.py install, and push Enter at each question. The tool backs up the full eMMC first (about 6 minutes; keep thebackups/folder), and it tells you when to connect again with preset 4. - When the tool says DONE, connect the Car Thing to the hub with the charger. PlayThing starts in about 1 minute.
If PlayThing or superbird-android is already installed: hold preset 4 while you connect, then run python3 flash.py install.
Hold preset 1 while you connect to start the stock software at any time. The README in the folder has all the steps, the buttons, and what to do if something goes wrong.
In the zip
| File | Content |
|---|---|
system.raw.xz, boot-area.img, manifest.json |
The image, with placeholders |
flash.py, blobs.py |
The flash tool. It downloads the Mali GPU driver, the video decoder firmware, and DiPlay 0.2.20 from their public sources, and checks their SHA-256. |
kernel-source.tar.xz, aosp-gpl-source.tar.xz |
The source code of the GPL and LGPL parts |
README.md, SHA256SUMS |
SHA-256 of the zip: 47f7b2ad9012dab8ebc783d6ab97fb2162ac1ddecffa80c1e55b3a5583218820
SHA-256 of the finished image (after the tool adds the downloaded files): 283ed927abe91ea458a28106f57bb88d2c3a9a0d71873b6856976e62ef2e1cd6
Thanks to DiPlay by shihabal3amri, which does the CarPlay work.