How to recover bootloader after failure during firmware upgrade

[vgergiev]

Hi Ted and team,
I've made a mistake and ejected usb from bluebus during the firmware upgrade (please don't ask why :( )
Now it's blinking red light and I can't connect to it with "Error 5: Access is denied".

Is there a way for me to restore bootload and make this magic box work again?

Thank you a lot in advance,
Vlad

[tedsalmon]

@vgergiev

Disconnect it from USB, then open the case up. You'll find a jumper near the BC127 labled "RECOVERY". Install the jumper so its in the shorting position then reconnect the BlueBus to USB. The Green light should begin to blink. Remove the "RECOVERY" jumper and install it how it was prior and you'll then be able to flash the firmware.

-Ted

[vgergiev]

Thank you, I've already figured it out. Just verified that everything works. Thank you again for such good design :) Regards, Vlad

…

On Wed, 15 Sep 2021 at 22:48, Ted Salmon ***@***.***> wrote: @vgergiev <https://github.com/vgergiev> Disconnect it from USB, then open the case up. You'll find a jumper near the BC127 labled "RECOVERY". Install the jumper so its in the shorting position then reconnect the BlueBus to USB. The Green light should begin to blink. Remove the "RECOVERY" jumper and install it how it was prior and you'll then be able to flash the firmware. -Ted — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#88 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ADHFBLNMQCZ43XETWNYRR43UCD2APANCNFSM5EDCLMFA> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.