You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Dragging a blind in the 3D view no longer floods Home Assistant with commands (thanks @tichris0, #174): a swipe on a blind sent a new position every 350 ms while the finger moved, and a blind motor cannot follow, so the controller queued every intermediate position and kept moving for a minute. A blind (and a fan) now gets one command when the finger lifts. A drag that ends where it began, such as a pan or rotation that merely started on a blind, sends nothing. Lamps still follow the finger.
On an iPhone the full-screen button now works, and the bottom buttons keep clear of the system bar (thanks @tichris0, #175): iPhone browsers have no Fullscreen API for elements, so the ⛶ button of the card did nothing; the card now covers the visible screen itself there. The switches and floor buttons at the bottom keep clear of the system's navigation bar or home indicator (env(safe-area-inset-bottom)), and the card's fill and full-screen height use the visible height (dvh) instead of 100vh, which on iOS is taller than what you see. I could not try this on a real iPhone; please tell me whether the panel or a card is affected if it is not fixed for you.
A NAS, router or server rack from a pack no longer lights the room (thanks @Guenni75, #153): the fix in 0.31.4.2 never took effect. It looked for the item name (nas), but a pack item's type reads pack:<pack>:nas, so no device was recognised. It is matched by its item name now, with a test against the real pack.
Door arcs in the exported or printed plan match the editor (thanks @Guenni75, #172): the export drew every door the same way, into its room and hinged at the first end, whatever you had chosen. It now follows Swing in/out, the hinge side (seen from the room), two leaves, sliding doors and openings without a door.