Skip to content

Multi Assets Margin

Igor Sazonov edited this page Apr 5, 2026 · 1 revision

Your whole portfolio working together. More buying power. More risk. Let's understand both.


🎯 What Is Multi-Assets Margin?

Normally, each position uses its own margin. Got $10k in BTC and $5k in USDT? Only the USDT backs your trades.

Multi-Assets Margin changes this. Now your BTC, ETH, and other assets ALL count as collateral. More buying power, better capital efficiency.

Before (Single-Asset Mode)

BTC: $10,000  → Just sitting there
ETH: $5,000   → Just sitting there  
USDT: $3,000  → Available for trading
─────────────
Buying Power: $3,000

After (Multi-Assets Mode)

BTC: $10,000  → Counts as collateral (at discount)
ETH: $5,000   → Counts as collateral (at discount)
USDT: $3,000  → Full collateral value
─────────────
Buying Power: ~$15,000+ (depending on haircuts)

⚠️ The Catch

When you get liquidated, EVERYTHING gets liquidated.

In single-asset mode, losing a BTC trade only affects your BTC margin. In multi-assets mode, a bad trade can wipe out your entire portfolio.

This is powerful. This is dangerous. Use it wisely.


🚀 Getting Started

Check Eligibility

// Get multi-assets margin rules
$rules = Bingx::trade()->getMultiAssetsRules();

print_r($rules);
// Shows which assets can be used as collateral
// and their haircut rates

Enable Multi-Assets Mode

// Switch to multi-assets margin
Bingx::trade()->switchMultiAssetsMode(true);

// Verify it's enabled
$mode = Bingx::trade()->getMultiAssetsMode();
echo "Multi-assets: " . ($mode['multiAssetsMargin'] ? 'ON' : 'OFF') . "\n";

Disable Multi-Assets Mode

// Switch back to single-asset mode
Bingx::trade()->switchMultiAssetsMode(false);

Note: You can only switch modes when you have no open positions.


📊 Understanding Collateral

Haircuts (Discounts)

Not all assets count at full value. BingX applies "haircuts" to reduce risk:

Asset Typical Haircut Collateral Value
USDT 0% 100%
BTC 5-10% 90-95%
ETH 5-10% 90-95%
Other 10-20% 80-90%

Example: $10,000 in BTC with 5% haircut = $9,500 collateral value

Check Your Collateral

$margin = Bingx::trade()->getMultiAssetsMargin();

echo "Total Collateral: {$margin['totalCollateral']}\n";
echo "Total Margin Used: {$margin['totalMargin']}\n";
echo "Available Margin: {$margin['availableMargin']}\n";
echo "Margin Ratio: {$margin['marginRatio']}%\n";

// Breakdown by asset
foreach ($margin['assets'] as $asset) {
    echo "{$asset['asset']}: ";
    echo "Balance: {$asset['walletBalance']}, ";
    echo "Collateral: {$asset['crossMarginAsset']}\n";
}

💡 When to Use Multi-Assets Margin

✅ Good Use Cases

1. Hedged Positions

// Long BTC, Short ETH - natural hedge
// Multi-assets mode gives better margin efficiency

$longBtc = Bingx::trade()->order()
    ->symbol('BTC-USDT')
    ->buy()->long()
    ->margin(5000)
    ->execute();

$shortEth = Bingx::trade()->order()
    ->symbol('ETH-USDT')
    ->sell()->short()
    ->margin(5000)
    ->execute();

// Combined margin requirement is LOWER than separate

2. Portfolio Strategies

// Multiple correlated positions
// BTC + ETH + SOL long portfolio
// Multi-assets mode reduces total margin needed

3. Capital Efficiency

// You hold BTC long-term but want to trade
// Instead of selling BTC for USDT, use BTC as collateral

❌ Bad Use Cases

1. Beginners

  • Stick with single-asset mode until you understand risk

2. High Leverage

  • Multi-assets + high leverage = fast liquidation

3. Uncorrelated Bets

  • Long BTC + Long random altcoin = double risk, not hedge

4. "All In" Trades

  • Never risk your entire portfolio on one trade

🛡️ Risk Management

Monitor Portfolio Risk

function checkPortfolioRisk(): array
{
    $margin = Bingx::trade()->getMultiAssetsMargin();
    $marginRatio = (float) $margin['marginRatio'];
    
    $status = match(true) {
        $marginRatio < 30 => ['level' => 'SAFE', 'emoji' => '🟢'],
        $marginRatio < 50 => ['level' => 'OK', 'emoji' => '🟡'],
        $marginRatio < 70 => ['level' => 'CAUTION', 'emoji' => '🟠'],
        $marginRatio < 85 => ['level' => 'DANGER', 'emoji' => '🔴'],
        default => ['level' => 'CRITICAL', 'emoji' => '🚨']
    };
    
    return [
        'margin_ratio' => $marginRatio,
        'status' => $status['level'],
        'emoji' => $status['emoji'],
        'total_collateral' => $margin['totalCollateral'],
        'available' => $margin['availableMargin']
    ];
}

// Usage
$risk = checkPortfolioRisk();
echo "{$risk['emoji']} Portfolio: {$risk['status']} ({$risk['margin_ratio']}%)\n";

Set Up Alerts

function monitorPortfolio(float $warningThreshold = 50): void
{
    while (true) {
        $margin = Bingx::trade()->getMultiAssetsMargin();
        $ratio = (float) $margin['marginRatio'];
        
        if ($ratio > $warningThreshold) {
            sendAlert("⚠️ Portfolio margin at {$ratio}%!");
            
            if ($ratio > 80) {
                sendAlert("🚨 CRITICAL: Reduce positions NOW!");
            }
        }
        
        sleep(60);
    }
}

Emergency Procedures

function emergencyReduceRisk(): void
{
    // 1. Cancel all open orders
    Bingx::trade()->cancelAllOrders();
    
    // 2. Get all positions
    $positions = Bingx::account()->getPositions();
    
    // 3. Close smallest positions first (preserve winners)
    usort($positions, fn($a, $b) => 
        abs($a['positionAmt']) <=> abs($b['positionAmt'])
    );
    
    foreach ($positions as $pos) {
        if (empty($pos['positionAmt'])) continue;
        
        // Close position
        Bingx::trade()->closeAllPositions($pos['symbol']);
        
        // Check if margin ratio improved
        $margin = Bingx::trade()->getMultiAssetsMargin();
        if ($margin['marginRatio'] < 50) {
            echo "Margin ratio safe: {$margin['marginRatio']}%\n";
            break;
        }
    }
}

📈 Strategies for Multi-Assets Mode

Delta Neutral

// Long spot, short futures = delta neutral
// Collect funding without directional risk

class DeltaNeutralStrategy
{
    public function setup(string $symbol, float $size): void
    {
        // Enable multi-assets mode
        Bingx::trade()->switchMultiAssetsMode(true);
        
        // Short futures (to collect positive funding)
        Bingx::trade()->order()
            ->futures()
            ->symbol($symbol)
            ->sell()->short()
            ->type('MARKET')
            ->quantity($size)
            ->leverage(1)  // Low leverage for safety
            ->execute();
            
        echo "Delta neutral position opened\n";
        echo "Collecting funding every 8 hours\n";
    }
    
    public function checkFunding(string $symbol): void
    {
        $funding = Bingx::market()->getFundingRateInfo($symbol);
        $rate = (float) $funding['fundingRate'];
        
        if ($rate > 0) {
            echo "🟢 Positive funding: You're earning {$rate}%\n";
        } else {
            echo "🔴 Negative funding: You're paying {$rate}%\n";
            echo "Consider closing position\n";
        }
    }
}

Pairs Trading

// Long strong asset, short weak asset
// Profit from relative performance

class PairsTrading
{
    public function openPair(
        string $longSymbol,
        string $shortSymbol,
        float $margin
    ): void {
        // Long the stronger asset
        Bingx::trade()->order()
            ->futures()
            ->symbol($longSymbol)
            ->buy()->long()
            ->type('MARKET')
            ->margin($margin / 2)
            ->leverage(5)
            ->execute();
            
        // Short the weaker asset
        Bingx::trade()->order()
            ->futures()
            ->symbol($shortSymbol)
            ->sell()->short()
            ->type('MARKET')
            ->margin($margin / 2)
            ->leverage(5)
            ->execute();
            
        echo "Pairs trade opened: Long {$longSymbol}, Short {$shortSymbol}\n";
    }
}

// Example: Long BTC, Short ETH
$pairs = new PairsTrading();
$pairs->openPair('BTC-USDT', 'ETH-USDT', 2000);

🔢 Calculating Effective Leverage

With multi-assets mode, your effective leverage is different:

function calculateEffectiveLeverage(): float
{
    $margin = Bingx::trade()->getMultiAssetsMargin();
    $positions = Bingx::account()->getPositions();
    
    $totalNotional = 0;
    foreach ($positions as $pos) {
        if (empty($pos['positionAmt'])) continue;
        $totalNotional += abs((float) $pos['notional']);
    }
    
    $totalCollateral = (float) $margin['totalCollateral'];
    
    if ($totalCollateral == 0) return 0;
    
    return round($totalNotional / $totalCollateral, 2);
}

$leverage = calculateEffectiveLeverage();
echo "Effective portfolio leverage: {$leverage}x\n";

⚡ Quick Reference

Enable

Bingx::trade()->switchMultiAssetsMode(true);

Disable

Bingx::trade()->switchMultiAssetsMode(false);

Check Status

$mode = Bingx::trade()->getMultiAssetsMode();

Get Margin Info

$margin = Bingx::trade()->getMultiAssetsMargin();

Get Rules

$rules = Bingx::trade()->getMultiAssetsRules();

❓ FAQ

Can I switch modes with open positions? No. Close all positions first.

Do all assets count as collateral? No. Only supported assets. Check getMultiAssetsRules().

What happens during liquidation? All positions are liquidated to cover the debt. Your entire portfolio is at risk.

Is this the same as portfolio margin? Similar concept. BingX calls it "Multi-Assets Margin Mode."

Should I use this? Only if you understand the risks and have a specific strategy that benefits from it.


🎯 Summary

Aspect Single-Asset Multi-Assets
Collateral USDT only All supported assets
Buying Power Lower Higher
Risk Isolation Yes No
Liquidation Per position Entire portfolio
Best For Beginners, isolated trades Hedges, portfolio strategies

Remember: More buying power = more ways to lose money. Use multi-assets margin only when you have a clear strategy that benefits from it.

Questions? Open an issue

Clone this wiki locally