Repository navigation
Building off of the previous pre-release I am now shipping FW0.3
Changes:
- Added stick calibration
- To enter calibration press and hold the stick click and touchpad click for about 5 seconds. Screen will indicate you are in calibration. For first 3 seconds do not move sticks, then when it says move, spin the sticks in circles and fully press trigger a few times. This needs to be run independently on each controller half.
- Calibration can be re-run whenever and data is saved to flash
- It is now recommended to run calibration once you have setup the controller. I programmed for there to be tighter dead zones after calibration is run.
- KNOW ISSUE: Sometimes the haptics stop working after running calibration. If this happens just reboot the controller.
- Added Rumble Support(may need some tuning but for now it works)
- Gyro should be improved
- Added 2 player firmwares. This allows there to be 2 controllers in the same vicinity. For your controller use ONLY either "Player1" or "Player2" firmware. They cannot be mixed and matched.
- This is a currently a work around until a specific dongle pairing mode is implemented.
- Rewrote how the trackpads are initialized. This fixes an issue with the trackpads sometimes not booting correctly when the battery is low.