Repository navigation
PutiaCNC 0.4.4
What's new in 0.4.4
New
- Helical entry (Profile outside, Profile inside and Pocket): the tool goes down in a spiral beside the start of the cut instead of plunging or ramping along the path. For a pocket it is the first ring (islands included). Set the circle's size (100 % of the tool by default) and the slope (3°). Where the spiral does not fit, that path enters as the Ramp in setting says and a note tells you. It takes priority over Ramp in; on a profile it leaves a round hole in the waste, like a lead-in, so use Ramp in if that material matters.
- Adaptive clearing (Pocket): a light stepover (12 % of the tool by default) and rounded corners on the inner rings, so the tool meets about the same amount of material all along the path. Gentler on the tool and the machine, and it suits deeper passes. It is the same rings with a lighter, smoother cut, not trochoidal loops that follow the remaining material.
- Nest on the stock (Modify menu): packs the selected parts onto the stock in rows (keeping clear of the clamps) to use less material. Set the gap between parts and the margin along the edges, and whether parts may turn by 90°. A group or a placed text moves as one part, and parts that do not fit stay where they were.
- Acceleration in the time estimate: a machine can have an Acceleration and a Corner deviation (Grbl's
$120and$11). With them the estimate and the 3D playback let the machine slow down for corners and short moves, so the time is closer to what the machine really takes. Off by default, and set for five machines in the catalogue.
Improved
- Messages look the same everywhere. An error is red with a circle, a warning orange with a triangle, news blue. That covers the banner, the bars under the view tabs, the notes in the tool windows, the warnings in the panels, the update window and the warnings list. A clamp collision is an error (red); the other toolpath warnings are orange.
- Notices that are not failures ("Nothing to export", "There is no toolpath yet", a file with no shapes) are warnings now, not errors.
- Tab moves on in every number field, window and panel: it takes the value and goes to the next control, buttons and tick boxes included (Shift+Tab goes back). In a dialog Tab stays inside it and wraps from the last control to the first. Enter in a field only confirms that field.
- Helical entry also works at the corners of rectangles, where it used to be skipped.
- The "tool hits a clamp" marker in the 3D preview sits where the tool first touches the clamp, not at the end of the whole move.
Testing
- New tests for helical entry (slope, same stock as without the spiral, no room), adaptive clearing, nesting, the acceleration model, the message levels and the finding position of a clamp contact.
Full changelog: v0.4.3...v0.4.4