Mobile Synth and Augmentation Workshop at CCRMA 2017

PAP (Powerbank Air Powered)

A 3D printed 100mm sized micro quad.

DIY 5" 3D printed FPV mini quad

Arduino energy monitor, using SCT-013-030 current sensors

Everything needed for building a simple Barndoor Tracker used for long exposure photograpy of stars.

A eurorack prototype breadboard made in kicad

plans for raised beds

AeraTM is an Open Source PAPR device (positive pressure air respirator) which is appropriate for emergency situations where properly certified commercial PAPRs are in short supply. It aims to be modular, customizable and easy-to-source, using as many off-the-shelf vitamins as possible and distributed production on 3DPrinters, Laser-Cutters, Mill…

使用 openscad 建模设计的 3D 文件，用于 3D 打印。

Pi Stack project: http://lellep.xyz/pi-stack/

OpenSCAD project to parametrically build a fireplace mantel and visualize it in a room. Useful when planning a fireplace install or make over.

Controlling Solid Stay Relays with Capacitive Sensor (CAP1188) Board

Mac(intosh) mini

OpenSCAD designs for a 3D-Printed LiquidPiston engine using pneumatic.

A collection of my openscad scripts.

a work in progress corne inspired dactyl manuform style keyboard with addressible rgb leds using the raspberry pi pico and an io expander and KMK firmware

DIY 60% split keyboard, 3D-printed and hand-wired

The intention is to reconstruct every physical part of the Framework laptop, so that this repo can be used as a resource to begin mods from. It forks from Framework's Mainboard and ExpansionCards repos.