ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.
-
Updated
Jun 4, 2024 - C++
Home Assistant is an open source home automation system that puts local control and privacy first. It is powered by a worldwide community of tinkerers and DIY enthusiasts, perfectly suited to run on a Raspberry Pi or a local server.
ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.
MQTT gateway for ESP8266 or ESP32 with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ thermometer compatibility & LoRa.
This allows you to configure your complete NSPanel via Blueprint with UI and without changing anything in the code
Open Home Automation with Home Assistant, ESP8266/ESP32 and MQTT
Arduino library to control Mitsubishi Heat Pumps via connector cn105
🚨 No longer used 🚨 - The C++ framework behind ESPHome
Learn how to connect your Flexispot (LoctekMotion) desk to the internet. This repository contains a collection of scripts to get your started, combined with research and instructions.
ESP32 firmware to read and control EMS and Heatronic compatible equipment such as boilers, thermostats, solar modules, and heat pumps
Hardware & Software documentation for the CircuitSetup Expandable 6 Channel ESP32 Energy Meter. Works with ESPHome and Home Assistant.
An Arduino/esp8266/esp32 library to directly interface with DSC security systems.
Wifi Smart Home Remotes that run on ESPHome
Neural Text To Speech Di Dart Cepat Ringan Tanpa Koneksi Internet dan bisa berjalan di cpu
ESP8266 firmware to read and control EMS and Heatronic compatible equipment such as boilers, thermostats, solar modules, and heat pumps
Firmware for ESP8266 based itead Sonoff switches for use with HomeAssistant / mqtt
Programmatically read data from your Voltronic, Axpert, Mppsolar PIP, Voltacon, Effekta etc Inverter and send it to Home Assistant via MQTT - Works with RS232 & USB!
A collection of my ESPHome components
My Home Assistant config
Alternative firmware for Arilux AL-LC0X LED controllers, based on the MQTT protocol and a TLS connection
Everything you need to get started with your own Intranet of Things, using the high-quality, low-cost Pico W as the backbone.
433MHz temperature and humidity sensor receiver that integrates with home automation systems.