Emulates MERG concentrator or MQTT for RFID reader communication with JMRI

This node is used to control a sliding fiddle yard i have put it here with the permission of Phillip Edward from MERG to assist other in seeing what can be done its based on a Arduino Namo

A 64 channel servo node based on a Nano here for demonstration purposes only to show what can be done. permission was given to place the code here by Phillip

Simple Node to control a single turnout and 3 2 aspect signal heads and 5 sensor inputs using a Arduino Nano it will work using a usb cable or can use a Rs485 bi directional module 2 wire module

Arduino sketch for controlling a Ferris wheel animation motor on a model railroad. Connects to JMRI for operation via a computer-based control panel as well as an auxiliary switch and proximity sensor.

A groupe of simple Cmri node using arduino nano's and Mega's and a TTL to RS485 RS485 to TTL Bilateral Module UART Port Serial Converter Module 3.3/5V Power Signal or if the nodes are connected by a usb lead to the pc

wiThrottle using JMRI-protocol; essential files copied from: https://gitlab.com/fsmd/electronics/withrottle

Arduino sketch to control double crossover via JMRI/CMRI

ESP32 / Arduino control for model train elevator, including UI and JMRI interface