Repository navigation
MIRLO 64 v0.8
Pre-releaseMIRLO 64 v0.8
From tomorrow I'll take a break to save Hyrule, so here's a new release. Enjoy!
This update adds the Analogizer's analog video, a Restart Game action, a more accurate CPU with the TLB and all instructions in hardware, a more exact RDP and a Transfer Pak SD that keeps the Game Boy game's own save. It also includes fixes for a few games.
To install, unzip tortuga.Mirlo64_0.8.zip onto the root of the Pocket's SD card, merging with the folders already there. Put your N64 games in .z64 format in Assets/n64/common/, then launch openFPGA > Console > Nintendo 64. Always update the core and its runtime together from the same ZIP.
Updating from v0.7: unzip over the old one. Four things change:
- The Transfer Pak SD (v0.7's "Virtual Transfer Pak") now uses the Game Boy game's own save, the
.sava Game Boy core uses:Saves/gbc/common/<game>.sav, orSaves/gb/common/for a.gbgame. The<N64 game>.gbsav1and.gbsav2files are not used any more: if one of them holds progress, copy it to the Game Boy game's.savbefore you play. The settings were renamed to Transfer Pak cartridge and Transfer Pak SD; your choice is kept. - "L stick dead zone" and "R stick dead zone" are one "Stick dead zone" now, in steps of 10 % (the default is 10 %). Set it again.
- The core's settings have two new entries, Analogizer video and, last, Restart Game. The Pocket shows at most 14 entries, which is why the two dead zones had to become one.
- Memories made with v0.7 may not be compatible with v0.8. A Memory is made for one version of the runtime, so a state saved before the update may not load.
What's new:
- Analogizer. The Analogizer support was made in collaboration with RndMnkIII. With an Analogizer in the Pocket's cartridge slot, the picture also goes out as RGBS, RGsB, YPbPr, Y/C (NTSC or PAL) or RGBHV, the last one with optional scanlines of 25, 50 or 75 %. Choose it with "Analogizer video". The Pocket's own screen stays on.
- The core finds out by itself whether the slot holds the adapter or a Game Boy cartridge: it reads a cartridge's header once, when the core starts, so put the adapter or the cartridge in before you start it.
- The Mister N64 SNAC adapter is not compatible with Analogizer. Please stay tuned for future news. For now, the Dock is required to play with controllers.
- Restart Game. The last entry of the core's settings starts the game over, as a console switched off and on.
- Transfer Pak SD. It plays a Game Boy game from the SD card and reads and writes the game's own
.sav, as said above.- For example, with Pokémon Stadium: start Pokémon Stadium, load the Game Boy game with "Load Transfer Pak 1", select "Transfer Pak SD" in "Controller 1 pak", and press "Restart Game" so that the game finds the pak when it boots.
- To make the automatic saves work with GB and GBC games, the core had to be advertised as a GB and GBC core too.
- CPU. The game CPU has the VR4300's own 32-entry TLB: games that run their code from mapped pages no longer go through the runtime for it, and a refill costs about 130 cycles where it cost about 3,000. The 64-bit instructions (
ddiv,ddivu,ldl,ldr,sdl,sdr) are done by the CPU, so the runtime emulates no instruction any more. The FPU's and the branches' cycles are closer to the console's, and a compare of two doubles now looks at all 64 bits. - RDP. It follows the console's rules for shade, Z, the start of a span, copy mode, the depth image's dz and the noise, checked against a pixel-exact software RDP, and takes 10 to 13 % fewer cycles on captured graphics tasks with the same output.
- Video. A serrated picture whose pitch is not one the core weaves shows each field's own rows, and 576-wide interlaced pictures are woven.
- Boot. A ROM whose boot code is an open-source IPL3 (a homebrew with an ELF, for instance) is loaded as that boot code does, and an exception the runtime cannot do goes to the game's handler instead of stopping it.
Game fixes:
- Conker's Bad Fur Day: scenes that came out with flat dark walls, black posts and no fence or bushes, depending on where the camera was, are textured.
- Killer Instinct Gold: the hit spark is no longer red (checked on the Pocket; the console's colour of it comes from a pixel-exact software RDP, which the RDP now matches).
- The Legend of Zelda: Majora's Mask: the Bombers' Notebook no longer flickers.
- Paper Mario: the pause menu's page turn, drawn into a 16-bit picture of an odd width, no longer shows streaks past the edge of the picture.
- Star Wars: Rogue Squadron: a hi-res menu that alternated between a good picture and a half-drawn one shows each field's own rows.
Side note: this core does no HLE (High Level Emulation). Everything is implemented in hardware.
MIRLO 64 is still a work in progress. If you encounter a problem, please report it on the project's issue tracker. Thanks!