Skip to content

v1.1.0 release

Choose a tag to compare

@trabucayre trabucayre released this 01 Mar 10:29
· 260 commits to master since this release

Evolution summary:

core

new

  • added option to select/deselect all cables, added variables ENABLE_xxx to enable corresponding cables. Some vendor drivers needs to to be disabled accordlingly
  • CMakeLists.txt,main: added options to enable/disable vendors drivers
  • CMakeLists.txt,main.cpp: option to enable/disable svf_jtag support
  • Add MinGW-w64 cross-compilation support for Windows
  • windows: add clang cross-compile support on Linux

update

  • CMakeLists.txt: libgpiod is only available on Linux OS. Do XVC and Remote bitbang available on all OS but Windows
  • CMakeLists.txt: try to uses find_package to detect the libFTDI and keep pkg_config way as backward compat
  • CMakeLists.txt: ihexParser must be built only when USE_FX2_LL is set
  • windows: make zlib static by default

fix

  • CMakeLists.txt: moved Windows cross-compile section after Vendors options and before build options
  • CMakeLists.txt: bump cmake_minimum_required to 3.10
  • Fix build with -DENABLE_FTDI_BASED_CABLE=off; fix potential array out-of-bounds access (#616)
  • jtag.cpp: ENABLE_ESP_USB_JTAG -> ENABLE_ESP_USB
  • CMakeLists.txt: added an option to enable Cross-compile on windows instead of detecting. Avoid potential unwanted situation with existing build system
  • CMakeLists.txt: try to fix issue with commit 278e04e

board

new

  • board: HyVision PCIe OPT01 rev.F (Kintex7 xc7k70tfbg676)

cable

new

  • handle other blaster PIDs

update

  • dirtyJtag: writeTMS: honour tdi method parameter (required by gowin GW5A family)
  • dirtyJtag: improves code / nitpick
  • esp_usb_jtag: toggleClk: ignore tdi/tms and keep these pins to the current state
  • dirtyjtag: Allow custom VID/PID via command line options
  • Enable support for CH347F
  • ch347jtag: align tms/tdi uses to others cables

fix

  • dirtyJtag: writeTDI: fixed last Byte align
  • dirtyJtag: writeTDI: when end don't shift before applying last bit -> this Byte is correctly aligned during previous step
  • Add workaround for slow JTAG on Sipeed Console
  • ftdipp_mpsse.cpp: setClkFreq: flush buffers before changing clock frequency
  • ftdiJtagMPSSE: restructure SIPEED firmware test to uses strncomp only once with SIPEED keyword

part

new

  • Altera: maxII EPM2210
  • Altera: arria 10
  • Altera: max10 10M25S
  • Lattice: ECP3 LFE3-150EA
  • Ggowin: GW5AT-15 (used on Sipeed Slogic16U3).
  • Xilinx: basic PDI prog for Spartan Ultrascale+
  • Xilinx: Add missing Xilinx UltraScale+ device IDCODEs.
  • Xilinx: Add Xilinx Spartan UltraScale+ devices.
  • Xilinx: Add missing Xilinx 7-series IDCODEs.
  • Xilinx: Zynq7000 xc7z007s

update

  • Efinix: Add header parsing and flash programming validation
  • Lattice: added SPI Flash access support for ECP3 family
  • Lattice: rework program_extFlash method to uses new mcsParser features when extension == mcs
  • Lattice: uses reg_content to defines status registers bits for Nexus family
  • Xilinx: allows Flash write for Xilinx Spartan3 targets
  • Xilinx: rework program_spi method to uses new mcsParser features when extension == mcs

fix

  • Altera: fixed done_bit_addr for 10M25SA, remains pgm_success_addr
  • Anlogic: fix high frequency flash programming issue
  • CologneChip: 2x SLEEP_US because windows...
  • Lattice: fixed SPI Flash access for NEXUS Family
  • Lattice: fixed SRAM for NEXUS family
  • Xilinx: load_bridge: uses configBitstreamParser getFilename to print real name instead of theorical (with or without .gz)
  • Xilinx: Fixed infinite loop in bit files smaller than 100

files

update

  • configBitstreamParser: added filename getter
  • mcsParser: reworks code to uses FlashDataSection

fix

  • latticeBitParser: align configuration Data start address to the
    bitstream header offset
  • latticeBitParser: added 128 clock pulses padding before preamble:
    Required by ECP3 family

spiFlash

new

  • spiFlashdb: MX25V8035F NOR flash chip
  • spiFlashdb: Macronix MX25L6405
  • spiFlash: added FlashDataSection to handle bitstream per sections when gap or 0xff area are present
  • spiFlash: added erase_and_prog method with vector of FlashDataSection

update

  • spiFlash: bulk_erase method: allows BP bypass and printXX with a verbose level
  • spiFlash: moved BP status, unlock step into a dedicatedmethod
  • spiInterface: added write method variant with vector of FlashDataSection

fix

  • spiInterface: all methods: added a \n after command displayed (avoids unclear message when calee methods uses printxxx)

spiOverJtag

new

  • Altera: Cyclone 10CL 10CL006YE144C8G + fix for quartus 25
  • Efinix: Efinix T120F324
  • Xilinx: xc7k70tfbg676 variant
  • bpiOverJtag: Adding BPI flash support and YPCB board support
  • README.md draft

update

  • build.py: simplify Kintex7 uses
  • build.py: added default value for pkg variable

fix

  • build.py: fixed model value for kintex7 with ISE
  • build.py: gzip file must be produces for all Xilinx devices
  • xilinx_spiOverJtag.v: can't declare spi_clk for spartan3e device. Fixed sck assign for spartan3e
  • xilinx_spiOverJtag.v: fixed code for virtex6 targets
  • xilinx_spiOverJtag.v: spartan3e: spi_drck -> drck
  • xilinx_spiOverJtag.v: don't redeclares tdo for spartan3e
  • Xilinx: fix spi/bpi select

doc

new

  • FPGAs: added Kintex UltraScale+ reference
  • FPGAs: added GW5AT-15 variant
  • guide/install.rst: added common's subsection about enabling/disabling cables/vendors drivers
  • guide/install.rst: added note about plugdev/dialout, introduces new 70-openfpgaloader.rules (without GROUP) file
  • guide/troubleshooting.rst: added section about Linux access right

fix

  • doc,.github/workflows/Test.yml: removed btd uses, looks obsolete
  • .github/workflows/Test.yml: another try to fix documentation
  • fpga: sort definitions

Contributors