Repository navigation
Anthracite 1.0.0
First public release of Anthracite v1.0, the design of the first production run.
To view the schematics, download the *-schematic.pdf files below.
See CHANGELOG.md for what is in it.
Attached
| File | What it is |
|---|---|
anthracite-{top,bottom,footswitch}-v1.0.0-gerbers.zip |
Gerbers and Excellon drill files, generated from the KiCad projects at this tag |
ordering-notes.md |
The parameters the production run was ordered with. Read this before ordering. |
anthracite-{top,bottom,footswitch}-v1.0.0-schematic.pdf |
Schematic of each board |
anthracite-v1.0.0-schematics.zip |
All schematic PDFs and PNGs (docs/schematics/) |
anthracite-v1.0.0-kicad.zip |
The KiCad projects of the three boards and the front panel, with their libraries (hardware/) |
anthracite-v1.0.0-enclosure.zip |
Enclosure STEP model, drawings and panel artwork (enclosure/) |
SHA256SUMS.txt |
Checksums of all attached files (sha256sum -c SHA256SUMS.txt) |
Each of the three zips above (schematics, KiCad, enclosure) holds one directory of the repository at this tag, with a README.txt and the licence files that apply to it.
The first-run top and bottom boards carry Anthracite V1.0 on the silkscreen. In these files the top and bottom boards carry V1.0 CERN-OHL-S-2.0 and github.com/trope-oshw/anthracite instead, and the footswitch board carries v1.0.
This release attaches no assembler-specific BOM or pick-and-place file. Build them from docs/bom-*.csv (which carry LCSC part numbers) and the KiCad projects; ordering-notes.md explains how. hardware/parts.md lists the parts chosen for each board.
The KiCad projects need KiCad 10 or later.
Schematics and 3D models
The schematics, KiCad projects and enclosure files are attached above. The complete set, including the 3D models of the assembled boards, is in the repository and in Source code (zip / tar.gz) below:
- Schematics (PDF, PNG):
docs/schematics/ - Assembled boards (STEP):
docs/3d/ - KiCad projects:
hardware/ - Enclosure (STEP, drawings, panel artwork):
enclosure/
Firmware
The firmware source is in firmware/. This release attaches no binary; build it from the source. With the Debug preset and the toolchain listed in firmware/README.md, the build reproduces the flash image on shipped units (42,516 bytes) with SHA-256:
b7581d1ae76084e6236442fdeab6e39d7fa7e3c6bd3c1cf8cb9a229a08162016