Skip to content

Releases

v1.6.1

Choose a tag to compare

@twodrops twodrops released this 10 Nov 11:36

v1.6.1

Fixed — Lovelace cards, "HA Style" (Terminal Style off) mode

A round of fixes making the Dashboard, Minimal, and Compact cards blend in properly with your active Home Assistant theme when Terminal Style is turned off — especially noticeable with richer Material-style themes.

  • Shapes now follow your theme: tiles, buttons, the chart box, and the ping/link rows previously had a fixed corner radius — they now match your theme's own card shape.
  • No more stuck uppercase text: the ONLINE/OFFLINE badge, the Run Test button, and the "Throughput"/"Latency" chart titles no longer stay in forced all-caps/letter-spaced terminal typography.
  • Hovering over cards now actually shows something: tiles on the Dashboard and the Ping/Link rows on the Minimal card previously had no visible hover feedback at all in this mode — fixed with a proper, theme-neutral highlight.
  • Section headings look like headings again: "Gauges", "Plan Usage", "Test History" had lost their divider line and most of their visual weight, making them look like they were floating with nothing anchoring them — restored the divider and gave them proper heading size/weight.
  • Header divider now spans the full card width, instead of stopping short of the edges.
  • Smaller polish: the chart legend's color dots and the Plan Compliance progress bars now pick up a properly rounded shape instead of staying hard-edged; the Compact card's subtle hover glow now uses your theme's accent color instead of a fixed blue/purple.
  • The chart hover tooltip no longer ignores Terminal Style — it previously could pick up your theme's background color even with Terminal Style turned on.

v1.6.0

Choose a tag to compare

@twodrops twodrops released this 10 Nov 10:11

v1.6.0

Fixed

  • Sensors no longer go unavailable after a single failed speed test. Previously, any failed test attempt — including a backend rate-limiting you (most noticeably with the Ookla CLI backend, which throttles if tested too often) — would immediately flip every sensor (download, upload, ping, server name, etc.) to "unavailable", even though the last successful reading was still perfectly good. Sensors now tolerate a handful of failures in a row, continuing to show the last known values, and only go unavailable once failures genuinely pile up (5 in a row) — the same point you'd already get a "repeated test failures" notification.

New

  • New sensor: "Consecutive Test Failures" (sensor.pace_..._consecutive_test_failures). Shows how many speed tests have failed in a row, with the most recent error message as an attribute. Unlike the other sensors, it stays available even during an outage, so you always have somewhere to check what's going wrong.

Docs

  • Added a troubleshooting section explaining this behavior and the Ookla rate-limiting case specifically.

v1.5.0

Choose a tag to compare

@twodrops twodrops released this 08 Nov 17:17

v1.5.0

Changed

  • Dashboard card chart legends now show the history average instead of the live value. The Throughput and Latency chart legends previously duplicated the live Download/Upload/Ping/Jitter numbers already shown in the metric tiles and gauges above. They now read Download (avg), Upload (avg), Ping (avg), Jitter (avg) — the mean over your configured History (hours) window, the same period the chart itself plots. No new setting required.

Fixed

  • Compact card: the speed/ping number could get silently clipped by the card's overflow handling on narrow cards or very high speeds (e.g. 4-digit Mbps values). The number is now never truncated — if something has to give, the unit label (Mbps/ms) shortens to … first instead.

Docs

  • CONFIGURATION.md now notes that on 1 Gbps+ connections you should set Max Download/Upload explicitly (or configure an ISP rated speed) — otherwise the gauge's auto-scale fallback (1000/500 Mbps) makes the ring always read "full".

v1.4.0

Choose a tag to compare

@twodrops twodrops released this 08 Nov 00:59

v1.4.0

New

  • Dashboard card: "Average Gauges" mode. The download/upload gauges can now show the average over your configured History (hours) window instead of just the live current speed. Enable it in the card editor under "Average Gauges" — the gauge label gets a small muted sub-line like 7D AVG so it's always clear which mode you're looking at.

Improved

  • Compact card: increased the speed/ping value, unit, and icon font sizes for better readability.
  • Visual polish across all 3 Lovelace cards (Dashboard, Minimal, Compact), especially in Terminal style + light/bright mode:
    • Borders, box fills, and hover highlights now consistently match the FRITZ-Portal reference look in both light and dark themes.
    • Fixed a small gap that could appear at the top edge of the Dashboard card on narrower screens.
    • Tiles and boxes no longer show a stray grey background when using HA's native (non-terminal) style.
    • Metric/gauge labels resized for better legibility.
    • Charts: the second line in a two-line chart (e.g. Upload, Jitter) now renders dashed so it stays distinguishable from the primary line even without color.

Docs

  • CONFIGURATION.md updated with the new "Average Gauges" option.

v1.3.5

Choose a tag to compare

@twodrops twodrops released this 07 Nov 15:55

v1.3.5

Fixed

  • Lovelace cards (Dashboard, Minimal, Compact) could momentarily render with
    the wrong panel/tile background color on initial load when terminal_style
    was set to false (HA style) — e.g. the Ping and Link/IP box in the
    Minimal card could show a grey terminal-style fill instead of blending
    into the native HA card background. The first render now correctly
    respects your configured terminal_style, matching subsequent updates.

v1.3.4

Choose a tag to compare

@twodrops twodrops released this 07 Nov 15:39

v1.3.4

Fixed

  • The "Speed Test Running" sensor no longer shows as running just because an
    instance is queued behind another one — it now reflects actual test
    activity only.
  • The "Run Speed Test" button no longer flickers between Unavailable/Available
    while a test is in progress elsewhere; pressing it while busy or queued is
    simply ignored instead.
  • Long ISP/server names in the Dashboard card header no longer run directly
    into the IP address with no space between them.

Changed

  • Corrected "Pace" branding to "PACE" throughout the setup/options flow and
    service descriptions, in English and all translated languages.
  • The "Speed Test Running" sensor now shows friendlier, properly localized
    on/off text in all 9 supported languages, instead of Home Assistant's
    generic device-class wording.
  • Restyled the run-test button on the Compact (Bubble) card.

v1.3.2

Choose a tag to compare

@twodrops twodrops released this 07 Nov 09:40

v1.3.2

Added

  • Section headers on the Dashboard card: Speed.Test, Plan.Usage, Gauges, and Test.History section titles with a full-bleed divider line.
  • "Show Plan & Usage" toggle to hide the whole Plan Compliance + Data Usage section.

Changed

  • Visual overhaul of the Dashboard card:
    • Less "pitch black" background.
    • Fully squarish corners in terminal style.
    • Reordered the Dashboard card's General Settings.
  • Updated the README dashboard screenshot.

Fixed

  • HA-style mode: tile/panel backgrounds were too bright — now blend with the card background and rely on their border for definition, matching the reference design.
  • Removed a duplicate divider line (header's own line plus a redundant one above the first section).
  • Section title font-weight and "--" marker color now match the reference exactly (normal weight, same muted tone as the title text, not accent-colored).

v1.1.4

Choose a tag to compare

@twodrops twodrops released this 07 Nov 08:27

v1.1.4

Added

  • Configurable card title: Dashboard and Minimal cards now have a title config option (default "PACE"), shown as the first setting in each card's visual editor. Clicking the title opens the Pace integration's settings page directly.
  • Missing translations for Internet Check Interval added for German, Spanish (MX), French (CA), Italian, Dutch, Polish, Portuguese (BR), and Russian — previously English-only.

Changed

  • Unified "PACE" capitalization across all Lovelace card names and headers (previously inconsistent "Pace"/"Internet Speed").
  • Server name, Online/Offline badge, Public IP, Last Test, and both gauges are now clickable and open their respective entities (Dashboard).
  • The IP text and the heartbeat strip are now independently clickable to their own entities (Public IP / Internet Connected) instead of sharing a single click target.
  • Added missing hover/press-highlight states across all three cards for a more consistent "pressed" feel (gauges now lift slightly on hover/press, matching Minimal's speed blocks).
  • Dashboard's header now shows the public IP and heartbeat strip on one merged, right-aligned row instead of three stacked lines.
  • Grid width standardized to 12 columns across all three cards in Sections view.
  • Run Test button label unified to "RUN TEST" across cards.

Fixed

  • Minimal card's Ping/Link boxes now follow Home Assistant's theme colors correctly in HA-style mode (previously blended into the card background with no contrast).
  • Minimal card's Link box no longer truncates the IP address with an ellipsis on narrow phone screens — it now stacks above the heartbeat strip instead.
  • Fixed a page-scroll-to-bottom false positive that could occur right after Home Assistant's initial page load.

Documentation

  • README and CONFIGURATION.md now document the connectivity heartbeat feature and the previously-undocumented Internet Check Interval option.

v1.0.9

Choose a tag to compare

@twodrops twodrops released this 06 Nov 22:31

v1.0.9

Added

  • Connectivity heartbeat trend — the integration now keeps a rolling history of its lightweight connectivity check (last ~20 samples) and surfaces it as a colored bar strip (OK / Failed / No data) instead of a misleading numeric "packet loss %". Exposed via a new recent_checks attribute on the Internet Connected binary sensor.
    • Dashboard card: heartbeat strip shown under the Online/Offline badge.
    • Minimal card: Ping and IP now sit side-by-side as matching pill boxes, with the heartbeat strip in the IP/Link box.
    • Compact card: the status dot gained a third "degraded" state (amber, pulsing) to flag recent instability while still online, alongside the existing healthy/down states.

Changed

  • Minimal card's Ping and Link/IP info are now equal-sized boxes in a single row, and the Link box is clickable (opens the Internet Connected sensor's more-info dialog), matching the Ping box's behavior.

Fixed

  • None in this release.

v1.0.2

Choose a tag to compare

@twodrops twodrops released this 06 Nov 17:41

PACE v1.0.2

Fixed

  • Lovelace cards failing to find entities when a location/area is assigned during setup: resolvePaceEntity()'s fallback entity search required pace to immediately follow the domain in the entity_id (e.g. sensor.pace_automatic_download_speed). When Home Assistant prepends an area name (e.g. sensor.buro_pace_automatic_download_speed), the search no longer found it, leaving the entity unresolved in the card. The resolver now tolerates one optional area-name segment before pace.

Changed

  • Documented the HACS → Marketplace rename in Home Assistant 2026.11+ in the README's installation instructions.