Skip to content

Releases

0.1.9

Choose a tag to compare

@github-actions github-actions released this 20 Nov 09:42

Synced with TimingBench 0.27.8 and 0.27.9.

Changed

  • Tighter row spacing. Read-only diagrams use a 30px row pitch instead of 40px, and the
    editor uses 40px instead of 48px. The same diagram is roughly 25% shorter, so more of it
    fits in a note before you have to scroll.
  • Edges were rebuilt around node circles. The line is clipped at the anchor's circle
    boundary, arrow and terminal positions derive from that circle's centre and radius, and
    labels on curved edges sit on the curve instead of floating above it.

Fixed

  • Arrow direction on edge endpoints — the triangle pointed back into the label instead of
    outward along the line.

Full changelog: https://github.com/udarent/obsidian-plugins-wavejson/commits/0.1.9

0.1.8

Choose a tag to compare

@github-actions github-actions released this 20 Nov 07:50

Synced with TimingBench 0.27.6 and 0.27.7.

Changed

  • config.hscale widens cells without inflating the waveform band. The band height is
    now anchored to the base cell width, so a diagram with hscale: 2 gets wider but keeps
    its row proportions. Before, the band grew with hscale and rows looked stretched.

Fixed

  • Half a pixel of column grid could show through the wedge where an x block meets a
    transition. The mask now covers one extra pixel on the right edge.

Full changelog: https://github.com/udarent/obsidian-plugins-wavejson/commits/0.1.8

0.1.7

Choose a tag to compare

@github-actions github-actions released this 20 Nov 06:41

Synced with TimingBench 0.27.4 and 0.27.5.

Changed

  • Larger text on the canvas. Row names, bus labels and cell labels now use upstream's
    scale (14px instead of 12px), so a diagram in a note reads the same as on wavedrom.com.
    The diagram box size is unchanged — only the type inside it grew.
  • Edge geometry reworked to match upstream. Arcs now start and stop at the midpoint of
    the transition band instead of the cell boundary, and the polyline shapes were
    re-measured, so existing node anchors land slightly differently.
  • The waveform band height is derived from the cell width rather than a separate
    two-state switch, so hscale no longer changes the band's proportions.

Fixed

  • x blocks no longer let the column grid show through the hatch.
  • A block feeding into z draws the two shallow bends upstream uses (vmz) instead of
    stopping dead at the cell edge.
  • Several z / x / u / d transition defects found while reviewing the tutorial's
    first example.

Full changelog: https://github.com/udarent/obsidian-plugins-wavejson/commits/0.1.7

0.1.6

Choose a tag to compare

@github-actions github-actions released this 20 Nov 03:00

Synced with TimingBench 0.27.3 — two clock rendering fixes.

Fixed

  • Stray edge arrows on level rows. A L. or H. row used to draw an arrow in every
    continuing cell, so a low period looked like a chain of edges. The arrow now belongs to
    the edge itself: only the first cell of a level run has one. Continuous clocks such as
    P....... still get an arrow per cell, as upstream does.
  • Clock cells following a bus or x block no longer draw a slanted cap. Upstream gives
    them a vertical rising edge (its pclk / nclk bricks), with the block cut at the cell
    boundary — the old cap left a triangular notch and shortened the level by 9px.

Full changelog: https://github.com/udarent/obsidian-plugins-wavejson/commits/0.1.6

0.1.5

Choose a tag to compare

@github-actions github-actions released this 20 Nov 02:35

Synced with TimingBench 0.27.2 — rendering fixes only, no API or layout changes.

Fixed

  • z rows meeting a bus block used to be drawn as a cross transition: the
    high-impedance line broke at the cell boundary and a spurious "X" appeared. It now
    follows upstream's mid entry — the line runs a few pixels into the new cell and then
    forks — so z slots into a block without the break.
  • u / d edges now match upstream: the level segments are drawn as hairlines and
    the transition is a solid cubic Bézier spanning about half a cell, instead of a dashed
    cell with a short straight step.
  • Fixed a path-construction bug that could emit a horizontal command with a concatenated
    coordinate and draw a line off the canvas.

Full changelog: https://github.com/udarent/obsidian-plugins-wavejson/commits/0.1.5

0.1.4

Choose a tag to compare

@github-actions github-actions released this 19 Nov 07:11

Synced with TimingBench 0.27.1.

Changed

  • Bus and x rows are drawn as full-height blocks whose transition belongs to the
    incoming cell, matching upstream WaveDrom's vm / x bricks. Transitions no longer
    look shifted half a cell to the left.
  • Bus labels are centred on the drawn block, not on the cell midpoint, so long labels
    such as head / body sit properly inside their block.
  • Hatch lines on x rows are clipped against the transition edges instead of running
    into the gap the transition leaves.
  • Toolbar buttons now share one size (32×26 for actions, 38 wide for the view toggle);
    the period icon is a T.
  • The split between source and diagram can be dragged (desktop editor).

Full changelog: https://github.com/udarent/obsidian-plugins-wavejson/commits/0.1.4

0.1.3

Choose a tag to compare

@github-actions github-actions released this 18 Nov 10:48

Synced with TimingBench 0.26.0, which reworked the read-only view.

Changed

  • Read-only diagrams are more compact. The header strip that was reserved above the
    waveform is gone, rows use the tighter row height, and the diagram scales to the width
    of the card (at most 2×; vectors stay sharp). Reading view now fits noticeably more
    content before you have to scroll.
  • Dropped the isEmbed argument passed to the editor core. Embedding was removed upstream,
    so the option no longer exists.

Full changelog: https://github.com/udarent/obsidian-plugins-wavejson/commits/0.1.3

0.1.2

Choose a tag to compare

@github-actions github-actions released this 18 Nov 10:28

Changed

  • manifest.json: authorUrl now points at the author's profile instead of a repository.
    The community plugin scanner warns when this field links to a repo rather than a person.

Full changelog: https://github.com/udarent/obsidian-plugins-wavejson/commits/0.1.2

0.1.1

Choose a tag to compare

@github-actions github-actions released this 18 Nov 10:24

Changed

  • No functional changes. Documentation, code comments and the release workflow are now
    in English.
  • Re-published so that a GitHub release matches the manifest version. The community
    submission check reported "no release matches your manifest version" for 0.1.0, even
    though the release existed and was tagged correctly.

Full changelog: https://github.com/udarent/obsidian-plugins-wavejson/commits/0.1.1

0.1.0

Choose a tag to compare

@github-actions github-actions released this 18 Nov 10:11