Skip to content

Releases

SliceTrigger 0.8.4

Choose a tag to compare

@va3mw va3mw released this 14 Oct 14:24

SliceTrigger: N1MM Logger+ function keys for your FlexRadio and station gear, so your hands stay on the keyboard during a contest.

Changes in 0.8.4

  • The taskbar button now shows a small green/amber/red badge for the connection state, and it also works when SliceTrigger is pinned to the taskbar. (Windows 10 hides taskbar badges when "small taskbar buttons" is on.)
  • The window icon is the plain ST icon.

Since 0.8.2: coloured connection status next to Connect, Windows 11 title bar colouring, Help > SliceTrigger on GitHub, authors in About.

Already on 0.8.0 or later? Use Help > Check for updates.

Download

SliceTrigger.exe below (Windows x64, no installer). Run it, then choose Settings > Install .exe in %APPDATA% (recommended).

SHA-256: b7429ab970ff25685a5fd9514f31e9725a04908ee426bc9d7608be5dab5a843f

What it does

  • RX antenna cycle: step the active slice ANT1 → RX_A → RX_B → back to ANT1 (any antennas, including XVTA/XVTB), or set a fixed RX antenna
  • Voice keyer: play Flex DVK memories 1–12 from a function key; ESC stops playback
  • Raw SmartSDR commands on the active slice, with {slice} substitution
  • KMtronic WEB relays, generic HTTP GET and TCP sends for other station gear
  • Radio discovery, reconnects automatically
  • Compact main window with a green/amber/red connection status and the radio's name; separate log window
  • Copy N1MM macro puts a ready-made function key line on the clipboard
  • Help > Check for updates downloads new versions from GitHub and verifies them

Status

Early release. Tested on a FLEX-8600 with N1MM Logger+: function key triggering, RX antenna changes including the ANT1/ANT2 return cycle, and the voice keyer including ESC to stop. Not yet confirmed on hardware: the connection status display, discovery and KMtronic relays.

Not yet supported: multiFLEX (more than one SmartSDR client on the radio) is not tested or supported, though it may be in a future version; use a single SmartSDR client. Diversity reception is not yet tested. The voice keyer needs a radio and SmartSDR version that include the DVK.

See the README for setup and details. MIT licensed.

SliceTrigger 0.8.3

Choose a tag to compare

@va3mw va3mw released this 14 Oct 14:20

SliceTrigger: N1MM Logger+ function keys for your FlexRadio and station gear, so your hands stay on the keyboard during a contest.

Changes in 0.8.3

  • Connection status is now a coloured bar next to Connect: green connected (with the radio's name), amber connecting, red not connected. The taskbar icon follows it.
  • On Windows 11 the window's title bar also turns green/amber/red. Older Windows keeps the normal title bar.
  • Help > SliceTrigger on GitHub opens this page; About shows the authors (Mike VA3MW and Claude) and the link.
  • Voice keyer (including ESC to stop) and the RX antenna cycle are now tested on a FLEX-8600.

Already on 0.8.0 or later? Use Help > Check for updates.

Download

SliceTrigger.exe below (Windows x64, no installer). Run it, then choose Settings > Install .exe in %APPDATA% (recommended).

SHA-256: c1c5b41331d062f54d91221a3a4c3236ce6b64624663569beb198f7f31dcf337

What it does

  • RX antenna cycle: step the active slice ANT1 → RX_A → RX_B → back to ANT1 (any antennas, including XVTA/XVTB), or set a fixed RX antenna
  • Voice keyer: play Flex DVK memories 1–12 from a function key; ESC stops playback
  • Raw SmartSDR commands on the active slice, with {slice} substitution
  • KMtronic WEB relays, generic HTTP GET and TCP sends for other station gear
  • Radio discovery, reconnects automatically
  • Compact main window with a green/amber/red connection status and the radio's name; separate log window
  • Copy N1MM macro puts a ready-made function key line on the clipboard
  • Help > Check for updates downloads new versions from GitHub and verifies them

Status

Early release. Tested on a FLEX-8600 with N1MM Logger+: function key triggering, RX antenna changes including the ANT1/ANT2 return cycle, and the voice keyer including ESC to stop. Not yet confirmed on hardware: the connection status display, discovery and KMtronic relays.

Not yet supported: multiFLEX (more than one SmartSDR client on the radio) is not tested or supported, though it may be in a future version; use a single SmartSDR client. Diversity reception is not yet tested. The voice keyer needs a radio and SmartSDR version that include the DVK.

See the README for setup and details. MIT licensed.

SliceTrigger 0.8.2

Choose a tag to compare

@va3mw va3mw released this 14 Oct 04:39

SliceTrigger: N1MM Logger+ function keys for your FlexRadio and station gear, so your hands stay on the keyboard during a contest.

Changes in 0.8.2

  • The Station field's tooltip now says to leave it empty, as multiFLEX is not yet supported.
  • Documentation: multiFLEX is not tested or supported yet; diversity reception is not yet tested.

Already on 0.8.0 or later? Use Help > Check for updates.

Download

SliceTrigger.exe below (Windows x64, no installer). Run it, then choose Settings > Install .exe in %APPDATA% (recommended).

SHA-256: e6f10664504411ea545ae602fb6fb860d0f8f519944d2e3a2a20e74f7a4cabfa

What it does

  • RX antenna cycle: step the active slice ANT1 → RX_A → RX_B → back to ANT1 (any antennas, including XVTA/XVTB), or set a fixed RX antenna
  • Voice keyer: play Flex DVK memories 1–12 from a function key; ESC stops playback
  • Raw SmartSDR commands on the active slice, with {slice} substitution
  • KMtronic WEB relays, generic HTTP GET and TCP sends for other station gear
  • Radio discovery, reconnects automatically
  • Compact main window with a green/amber/grey connection light and the radio's name; separate log window
  • Copy N1MM macro puts a ready-made function key line on the clipboard
  • Help > Check for updates downloads new versions from GitHub and verifies them

Status

Early release. Confirmed on a FLEX-8600 with N1MM Logger+: function key triggering, RX antenna changes and voice keyer playback. Not yet confirmed on hardware: the ANT1/ANT2 return cycle, ESC stop, discovery and KMtronic relays.

Not yet supported: multiFLEX (more than one SmartSDR client on the radio) is not tested or supported, though it may be in a future version; use a single SmartSDR client. Diversity reception is not yet tested. The voice keyer needs a radio and SmartSDR version that include the DVK.

See the README for setup and details. MIT licensed.

SliceTrigger 0.8.1

Choose a tag to compare

@va3mw va3mw released this 14 Oct 04:33

First public release of SliceTrigger: N1MM Logger+ function keys for your FlexRadio and station gear, so your hands stay on the keyboard during a contest.

Download

SliceTrigger.exe below (Windows x64, no installer). Run it, then choose Settings > Install .exe in %APPDATA% (recommended).

SHA-256: b2fcf888e2567767a274c5c1e4936394f3f924314d7412909de986d89a319dc9

What it does

  • RX antenna cycle: step the active slice ANT1 → RX_A → RX_B → back to ANT1 (any antennas, including XVTA/XVTB), or set a fixed RX antenna
  • Voice keyer: play Flex DVK memories 1–12 from a function key; ESC stops playback
  • Raw SmartSDR commands on the active slice, with {slice} substitution
  • KMtronic WEB relays, generic HTTP GET and TCP sends for other station gear
  • Radio discovery, reconnects automatically
  • Compact main window with a green/amber/grey connection light and the radio's name; separate log window
  • Copy N1MM macro puts a ready-made function key line on the clipboard
  • Help > Check for updates downloads new versions from GitHub and verifies them

Status

Early release. Confirmed on a FLEX-8600 with N1MM Logger+: function key triggering, RX antenna changes and voice keyer playback. Not yet confirmed on hardware: the ANT1/ANT2 return cycle, ESC stop, discovery and KMtronic relays.

Not yet supported: multiFLEX (more than one SmartSDR client on the radio) is not tested or supported, though it may be in a future version; use a single SmartSDR client. Diversity reception is not yet tested. The voice keyer needs a radio and SmartSDR version that include the DVK.

See the README for setup and details. MIT licensed.