Skip to content

Dash-Chan 0.4.0 beta — GPS presets, Wisp & Ember

Pre-release
Pre-release

Choose a tag to compare

@valleytechsolutions valleytechsolutions released this 17 Oct 06:31

Dash-Chan 0.4 adds GPS receiver setup and two new original companions for the official M5Stack StackChan K151.

Open the web flasher & Avatar Studio · GPS compatibility & ATGM336H wiring

  • GPS & SD → GPS SETUP: named M5Stack Unit/Module/COMX/GNSS/Atomic/Cap UART presets, ATGM336H-5N/-6N DIY options, Port A/B/C and custom exposed Grove RX pins, baud selection and a one-shot baud finder. The receiver stays receive-only; no configuration commands are sent.
  • Wisp: a cute black ghost with bright eyes and drifting wisps. Ember: a tiny flame with flickering tips and sparks. Both work with outfits, eye styles, affection, panic and field gear, on the robot and in Avatar Studio.
  • Backward-compatible saved settings and original avatar files; USB uploads check that firmware supports the new shapes before changing anything. Both mute preferences persist.
  • Expanded wiring guide, handbook, native screenshots and original-art attribution. Bare ATGM modules need regulated 3.3 V power; Grove red is 5 V. Stack, Atomic and Cap products need correctly routed adapters. This is UART NMEA compatibility, not universal plug-and-play or LoRa/RTK/cellular support.

Validation: firmware build; host regressions and 50,000 malformed radio inputs; eight GNSS talkers decoded through the pinned GPS parser; 2,880 style combinations; desktop/mobile browser tests; physical baud search/cancel/recording lockouts; USB uploads of both new shapes; mute/GPS persistence after software restart. A usable-fix bench session reopened 38 WiGLE rows; a separate no-fix check wrote only a header with zero queue drops. The interactive framebuffer-capture session had seven cumulative queue drops. Full measured evidence and limits.

Only Unit GPS v1.1 on the attached K151 was physically tested. Outdoor road stability, detection performance and WiGLE server upload acceptance remain unverified. This is a beta.

The ZIP is the exact verified CI build used by the web flasher. It includes split images, SHA-256 checksums, installation instructions, and source/license notices. Preserve NVS/calibration; do not erase the whole flash or format SD to update.

M5Burner factory-reset package

The separate K151-FACTORY-RESET.bin asset is for M5Burner at address 0x0. It resets NVS, including settings and factory servo calibration. Prefer the web installer to preserve calibration. If using M5Burner, read backup and NVS restore instructions first. Head motion must remain off until calibration is restored. Checksums and instructions are supplied as M5BURNER-SHA256SUMS.txt and M5BURNER-INSTALL.md. This clean merged image embeds the exact four original release images; a factory-reset install through M5Burner has not been physically tested.