Repository navigation
Releases
Lumen PSX v0.20.0
Connections: Wi-Fi, Bluetooth controllers and a USB network cable, from RAM, and the
console's kernel: which one runs, and putting Sony's back so all of it works. Verified on
the console: SDL3 runs Lumen; the kernel restore (Project Eris v47 to Sony's) with its full
backup first; on Sony's kernel the network modules load. Not yet tried with real Wi-Fi /
Bluetooth / Ethernet adapters.
Added
- Settings, Connections: switches for Wi-Fi and Bluetooth, the networks in range (the
password on the on-screen keyboard, only its WPA hash kept on the stick), Bluetooth
controllers (search, pair with no PIN, forget), a USB Ethernet adapter that connects by
itself, and the clock set over the internet. The settings rail fits nine sections. - Settings, About, Kernel: shows the running kernel (Sony, Project Eris v47, ModMyClassic
2019, other). On one that is not Sony's, it can put Sony's back from the console's own
recovery partition: a full read-only firmware backup first (also on its own, Square),
the current kernel copied to the stick, the write checked and undone at once if it does
not match, and a way back to the previous kernel. The only place Lumen writes the
internal memory; while it is being proven on more consoles it needs the file
lumen/kernel-write-okon the stick. Recovery guide: https://lpsx.dev/recovery - The on-screen keyboard has a symbols layer (Shift: A, a, #+=) and longer texts.
Changed
- SDL3 3.4.20 with sdl2-compat runs Lumen on the PSC compositor (psc-platform 2.5.0): the
same SDL2 calls, newer controller support. If Lumen shows no picture with it, the next
start uses SDL 2.0.4 again by itself;sdl=stockin settings.ini turns it off. - POWER waits while the kernel is being written.
Platform
- psc-platform 2.5.0:
psc-sdl3,psc-net,psc-btandpsc-netmod-stockship in
lumen/compositor/.
Commits since v0.19.0
- 0.20.0: Connections (Wi-Fi, Bluetooth controllers, USB Ethernet) and the kernel restore; psc-platform 2.5.0 (4af811b)
- kernel.sh logs to logs/kernel-restore.log (logs/kernel.log is the boot's dmesg) (1866890)
- Kernel card: point to the recovery guide (lpsx.dev/recovery) (f0f57a6)
- Kernel: full read-only firmware backup first, a backup-only action, the fastboot helper (7dad5d7)
- Settings, About, Kernel: restore Sony's stock kernel (or go back), behind a test flag (ecb8748)
- kernel.sh: see the running kernel, restore Sony's stock kernel or the previous one (6d46f07)
- Settings, Connections: Wi-Fi, Bluetooth controllers, USB Ethernet, clock (57388a3)
- net.sh: Wi-Fi and Bluetooth from RAM (bf5dae8)
- Boot: SDL3 + sdl2-compat in the compositor overlay, with its own guard (5ce0c31)
- README: the website moved to lpsx.dev (c1f4978)
Platform: psc-platform v2.5.0
psc-platform=v2.5.0
wayland=1.26.0
wayland-protocols=1.46
weston=16.0.2
libdrm=2.4.124
libseat=0.9.1
libdisplay-info=0.2.0
retroarch=RetroArch 1.22.2
joypad-autoconfig=v1.22.0
pcsx_rearmed=libretro/pcsx_rearmed@7b0e8f8fadfbce3d170d195b9d9eecaabfa08c8e
ppsspp=hrydgard/ppsspp@fa50bb1976065c4f8b1b47af227d367fe9771555
fceumm=libretro/libretro-fceumm@e0f3086a8104f8fbbe49a2615b10401504a9533f
snes9x=libretro/snes9x@fae2fea08f74180759ef540ee94259213f503480
genesis_plus_gx=libretro/Genesis-Plus-GX@b9c2316441978d4015ba30e9a95d9b0e6f8ee981
gambatte=libretro/gambatte-libretro@77f2567d718b8973d02caa2daa8dce4953faf811
gpsp=libretro/gpsp@5819380c2ffb0900219d700a382ee68c464ebb99
mupen64plus_next=libretro/mupen64plus-libretro-nx@15bada85906593376e8fd697f1b0b3af3a20f512
kernel=lscorcia/linux-sony-psclassic@d716d7e29e0bf25569e20093d5260c13f618aaf1
sdl3=3.4.20
sdl2-compat=2.32.74
openssl=4.1.0
wpa_supplicant=2.12
iw=6.17
libnl=3.12.0
curl=8.23.0
zlib=1.4
busybox=1.38.0
linux-firmware=20261019
ca-bundle=2026-11-05
bluez=5.88
glib=2.90.1
readline=8.3
Install: format a USB stick FAT32 with the name SONY, unzip at its root, plug it into the console and power on (README-INSTALL.txt). No Project Eris needed.
Lumen PSX v0.19.0
Less stutter: at start-up, on the dashboard, with a menu open and in the launch.
Verified on the console through five rounds of test builds (logs with debug/perf):
start-up 2072 ms -> about 800 ms, no more frames of 0.2 to 0.9 s when the selection
moves to another system, the settings at 60 fps instead of 31 to 50. Not yet timed on
the console: the game menu with the last change to the cards, and the start-up with the
last two reads moved off the main thread.
Changed
- Start-up: the library, the launch declarations of every system, the interface's icons
and the saved selection are read from the stick on a thread while the splash plays, and
the audio device opens on another. The logo's fade and fill and "Loading" animate at
the display's rate instead of a few times a second, and the animation no longer adds
its own 0.65 s to every start. The splash then stays until the covers on screen and the
background are in (0.7 s at most) and dissolves into a finished dashboard. - Nothing reads the stick on the main thread while the dashboard runs. A file on the
stick goes through its FUSE daemon and a question to it waits while the stick is busy:
the launch declaration read when the selection settled on another system (250 to 860 ms
on the console), a help bar set's icons the first time it showed, the settings asking
every frame whether the compositor package exists, the free space of the About page. - Fonts are read once into memory: a new title or letter no longer reads the stick in
the middle of a frame. - An open menu costs the GPU half as much, same picture (to 2/255): its scrim is folded
into the frame under it by the shaders instead of drawn as a full-screen layer
(scrim_fold=0draws it), and inside a glass card the fill and the shadow under it are
one layer (card_merge=0). - Launch: the game's art is painted into the illustration and its texts are made once
the selection settles, on a thread, not on the frame Play is pressed; the field that
opens the launch hides the dashboard from the GPU as it grows. - L1 / R1 land on a page whose covers are already there (the next and previous pages
are decoded ahead; covers stay in a 32 MB cache), and a game's background is ready
sooner (the last three decoded are kept, the next game's is decoded ahead). - The help bar's sets are made when first shown (start-up: 722 ms -> 19 ms on the console).
debug/perflogs every frame over 25 ms with what it was made of (perf: slow frame), where the main thread was when a frame hung over 150 ms (perf: stuck at,
addresses for addr2line on the unstripped build), a line per start-up step (boot:),
how long the dashboard took to be ready under the splash, and the backgrounds' and the
launch art's times.
Commits since v0.18.0
- 0.19.0: less stutter at start-up, on the dashboard, in the menus and the launch (4c77e93)
- Start-up: the saved selection and the menu music check are read by the scan thread (89b1fe4)
- Glass cards: the fill and the shadow under it are one layer inside the card (045a1eb)
- A menu's scrim is folded into the frame under it instead of drawn over it (b7b8610)
- Settings, About: the free space is asked on a thread (d5e43f7)
- No reads from the stick on the main thread while the dashboard runs (51c4660)
- Perf probe: where the main thread is when a frame hangs; no file check per frame on a native port (f6d6356)
- Start-up: the audio device opens on its own thread; boot marks per step (0b02ae4)
- Changelog and version 0.19.0-dev: test builds of the stutter pass (0b13254)
- Backgrounds: the last three decoded are kept, the next game's is decoded ahead (69cba31)
- Covers: what is on screen first, then the next and previous pages; kept in a 32 MB cache (2c15504)
- Help bar: a set's icons and texts are made the first time it is drawn (e4226da)
- Launch: the growing field hides the dashboard from the GPU (12c7f61)
- Cost meter: only the on-screen part of a quad counts (d9dabe4)
- Start-up: the splash stays whole until the dashboard under it is ready (5e9b9e3)
- Launch: the game's art is painted into its illustration ahead, on a thread (f20cddd)
- Fonts: each file read once into memory, every size opened from that copy (550ae7d)
- Perf probe: one line per slow frame, with the text rendered in it (80af44b)
- Start-up: the library scan on its own thread, the splash plays while it loads (6d5446a)
Platform: psc-platform v2.4.1
psc-platform=v2.4.1
wayland=1.26.0
wayland-protocols=1.46
weston=16.0.2
libdrm=2.4.124
libseat=0.9.1
libdisplay-info=0.2.0
retroarch=RetroArch 1.22.2
joypad-autoconfig=v1.22.0
pcsx_rearmed=libretro/pcsx_rearmed@7b0e8f8fadfbce3d170d195b9d9eecaabfa08c8e
ppsspp=hrydgard/ppsspp@fa50bb1976065c4f8b1b47af227d367fe9771555
fceumm=libretro/libretro-fceumm@e0f3086a8104f8fbbe49a2615b10401504a9533f
snes9x=libretro/snes9x@fae2fea08f74180759ef540ee94259213f503480
genesis_plus_gx=libretro/Genesis-Plus-GX@b9c2316441978d4015ba30e9a95d9b0e6f8ee981
gambatte=libretro/gambatte-libretro@77f2567d718b8973d02caa2daa8dce4953faf811
gpsp=libretro/gpsp@5819380c2ffb0900219d700a382ee68c464ebb99
mupen64plus_next=libretro/mupen64plus-libretro-nx@15bada85906593376e8fd697f1b0b3af3a20f512
kernel=lscorcia/linux-sony-psclassic@d716d7e29e0bf25569e20093d5260c13f618aaf1
Install: format a USB stick FAT32 with the name SONY, unzip at its root, plug it into the console and power on (README-INSTALL.txt). No Project Eris needed.
Lumen PSX v0.18.0
Native ports of PlayStation games, USB transfer between two sticks, the library check, and
record mode. Checked in psc-sim only: nothing of this release has been verified on the
console yet (released so on purpose: there is no adapter at hand for a second USB drive).
In the simulator: the native ports (listing, chip, launch), the transfer (browse, copy both
ways, stop, the drive vanishing mid-copy, not enough space, the FAT32 4 GB limit, delete,
the offer, Settings) and the library check (a library broken on purpose, LibCrypt images,
a case-sensitive disk). Not verified on the console: detecting and mounting a real second
drive, remounting it writable, power drop-outs on the front ports, a real native port
started from Lumen, and the cost of the native-port launch on the console's GPU.
Added
- Native ports of a system's games. A game recompiled to run on the console itself (no
emulator) goes in<root>/games/<id>-native/<name>/(games/psx-native/for the
PlayStation;[library] portsin the declaration), in the layout of a homebrew app
(app.ini, the program,cover.png), and is listed among that system's games like any
other, not under Homebrew. Its tile carries a "Native port" chip, and its launch is its
own (lumen-design guidelines/06, "Launch: a native port"): the PlayStation takes the disc
as always, then charges up: energy runs along its edges, an aura builds, arcs flicker,
it shakes, rises on a shockwave and the energy floods the frame (3.4 s). A system
without an energized machine shows the cover as a card that switches itself on. It
starts as a program (kind=app); graphics levels, the CRT filter and attract-mode demos
do not apply to it. - Record mode, for videos made in a simulator:
LUMEN_RECORD=<file or fifo>makes time
advance exactly1/LUMEN_RECORD_FPS(default 60) per presented frame and appends every
frame as raw RGBA; scripted inputs and screenshots follow that clock;
LUMEN_RECORD_SECONDSends the run. Normal runs are not affected. - USB transfer: copy files between the Lumen stick and a second USB drive with the pad
(docs/usb-transfer.md; lumen-designusb-transfer*.html). Plugging a second drive in
shows a pill on the Home for 8 s (Square opens the transfer; nothing opens by itself),
and Settings, Library has "Transfer files". One card with two panes, one per drive:
Left / Right change pane, Cross opens a folder or marks a file, Square marks, Start
copies what is marked to the other drive, Triangle opens the options. The
destination is the folder open in the other pane or, on the Lumen stick, the games
folder of any system declared insystems/. Both directions. - The copy runs on its own thread with a progress card (bytes, file count, time left) and
can be stopped. Free space is checked first; files already on the destination with the
same size are skipped, so a copy cut short can be repeated. Each file is written as
<name>.lumen-part, flushed and renamed; the second drive is mounted read-only and is
writable only while it is the destination. A drive that disappears mid-copy ends the
copy with a message and the unfinished file is removed. After a copy to the Lumen stick
the library is rescanned. - Library check: Settings, Library, "Check library" (
docs/library-check.md; lumen-design
library-audit.html). It reads every system declared insystems/and lists, game by
game, what keeps a game from being listed or from starting: a folder withoutGame.ini,
aGame.iniwithoutDiscs=or naming a disc that is not there, a.cueor.m3u
that points to a missing file (or writes its name with other capitals on a
case-sensitive stick), empty files, a.binwithout its.cue, an empty game folder, a
system whose core is missing, a homebrew app withoutapp.inior its program, an
unfinished copy, an.sbithat is not named like its disc, and a LibCrypt-protected
disc without its.sbi: the serial is read from the image (SYSTEM.CNF) and looked up
insystems/psx.protected(197 serials, from PSX Data Center's SBI list). The
native ports folders are checked too, with the rules of homebrew apps. Each problem
shows the file and the folder. Read-only; the scan runs on its own thread. - USB transfer, Triangle: options. "Eject USB", and "Delete N items" for what is marked on
either drive, after a confirmation (Cancel focused). Lumen's own folder cannot be deleted. LUMEN_USB2=<folder>makes a folder play the second drive (psc-sim) and
LUMEN_USB2_KBPS=<n>slows the copy down, to test the flow without hardware.
Commits since v0.17.0
- Library check: native ports folders too; an unfinished copy is named like its game (112decb)
- Native ports: the PlayStation, energized, instead of the cover card (3689ad1)
- USB transfer: the delete row names its drive, the confirmation shows the folder (1ce38e3)
- USB transfer: Triangle opens the options; delete what is marked, after a confirmation (78bc338)
- USB transfer: LUMEN_USB2_FREE_MB test hook; not-enough-space, 4 GB and case paths checked in psc-sim (004aa34)
- tools/install.sh: LUMEN_NO_EJECT=1 leaves the stick mounted (8804d33)
- Library check: LibCrypt discs without their .sbi, by the serial in the image (3875628)
- Library check: Settings, Library lists the games that are set up wrong (328603f)
- USB transfer: copy files between the Lumen stick and a second USB drive with the pad (4344b45)
- Native ports: a system's recompiled games listed among its own, with a chip and their own launch (601b76c)
- Record mode: virtual 60 fps clock and raw frame dump for simulator videos (eca49dd)
Platform: psc-platform v2.4.1
psc-platform=v2.4.1
wayland=1.26.0
wayland-protocols=1.46
weston=16.0.2
libdrm=2.4.124
libseat=0.9.1
libdisplay-info=0.2.0
retroarch=RetroArch 1.22.2
joypad-autoconfig=v1.22.0
pcsx_rearmed=libretro/pcsx_rearmed@7b0e8f8fadfbce3d170d195b9d9eecaabfa08c8e
ppsspp=hrydgard/ppsspp@fa50bb1976065c4f8b1b47af227d367fe9771555
fceumm=libretro/libretro-fceumm@e0f3086a8104f8fbbe49a2615b10401504a9533f
snes9x=libretro/snes9x@fae2fea08f74180759ef540ee94259213f503480
genesis_plus_gx=libretro/Genesis-Plus-GX@b9c2316441978d4015ba30e9a95d9b0e6f8ee981
gambatte=libretro/gambatte-libretro@77f2567d718b8973d02caa2daa8dce4953faf811
gpsp=libretro/gpsp@5819380c2ffb0900219d700a382ee68c464ebb99
mupen64plus_next=libretro/mupen64plus-libretro-nx@15bada85906593376e8fd697f1b0b3af3a20f512
kernel=lscorcia/linux-sony-psclassic@d716d7e29e0bf25569e20093d5260c13f618aaf1
Install: format a USB stick FAT32 with the name SONY, unzip at its root, plug it into the console and power on (README-INSTALL.txt). No Project Eris needed.
Lumen PSX v0.17.0
Interface sounds. Checked in psc-sim (the sim has no audio output: the sounds were reviewed
from LUMEN_SFX_DUMP) and on the console.
Added
- Interface sounds on the dashboard, Settings, the game menu and the keyboard
(lumen-design guidelines/06 "Sound"): a tick per move, a soft wooden tap for a system
(higher for the next, lower for the previous), two quick taps for a page, short notes for
open / back / confirm / play. Synthesised at start like the launch clicks, no sound
files; up to four at once. Nothing sounds when nothing moved, during the screensaver or
during the launch. - Settings, Sound, "Interface sounds" (on by default, setting
ui_sounds); the Volume of
that page scales them. The launch click plays either way. LUMEN_SFX_DUMP=<dir>writes every effect as a WAV, to review them or put them on a video.
Commits since v0.16.0
- 0.17.0: interface sounds, with an on/off switch in Settings, Sound (0f176bb)
- Interface sounds: a page is two quick wooden taps; no effect uses noise any more (e3913aa)
- Interface sounds: the system switch is a soft wooden tap (520 Hz next, 440 Hz previous) (b3de300)
- Interface sounds: synthesised UI effects with an on/off switch in Settings, Sound (4ab6a2e)
Platform: psc-platform v2.4.1
psc-platform=v2.4.1
wayland=1.26.0
wayland-protocols=1.46
weston=16.0.2
libdrm=2.4.124
libseat=0.9.1
libdisplay-info=0.2.0
retroarch=RetroArch 1.22.2
joypad-autoconfig=v1.22.0
pcsx_rearmed=libretro/pcsx_rearmed@7b0e8f8fadfbce3d170d195b9d9eecaabfa08c8e
ppsspp=hrydgard/ppsspp@fa50bb1976065c4f8b1b47af227d367fe9771555
fceumm=libretro/libretro-fceumm@e0f3086a8104f8fbbe49a2615b10401504a9533f
snes9x=libretro/snes9x@fae2fea08f74180759ef540ee94259213f503480
genesis_plus_gx=libretro/Genesis-Plus-GX@b9c2316441978d4015ba30e9a95d9b0e6f8ee981
gambatte=libretro/gambatte-libretro@77f2567d718b8973d02caa2daa8dce4953faf811
gpsp=libretro/gpsp@5819380c2ffb0900219d700a382ee68c464ebb99
mupen64plus_next=libretro/mupen64plus-libretro-nx@15bada85906593376e8fd697f1b0b3af3a20f512
kernel=lscorcia/linux-sony-psclassic@d716d7e29e0bf25569e20093d5260c13f618aaf1
Install: format a USB stick FAT32 with the name SONY, unzip at its root, plug it into the console and power on (README-INSTALL.txt). No Project Eris needed.
Lumen PSX v0.16.0
The first start asks for the language. Checked in psc-sim only; not yet verified on the
console.
Added
- On a new install (no
settings.iniyet) the welcome opens with a language page: every
installed language in its own name, Up / Down to pick, Cross to apply it. The
presentation that follows is already in the chosen language. The page is shown even when
the presentation is hidden, and only once: the answer is stored aslanguage_asked = 1.
Existing installs are not asked (asettings.iniwithout the key counts as answered).
Changed
- The default language is English (
language = en, wases). It is the one focused on
the language page.
Commits since v0.15.0
- 0.16.0: the first start asks for the language, English by default (0b17d57)
Platform: psc-platform v2.4.1
psc-platform=v2.4.1
wayland=1.26.0
wayland-protocols=1.46
weston=16.0.2
libdrm=2.4.124
libseat=0.9.1
libdisplay-info=0.2.0
retroarch=RetroArch 1.22.2
joypad-autoconfig=v1.22.0
pcsx_rearmed=libretro/pcsx_rearmed@7b0e8f8fadfbce3d170d195b9d9eecaabfa08c8e
ppsspp=hrydgard/ppsspp@fa50bb1976065c4f8b1b47af227d367fe9771555
fceumm=libretro/libretro-fceumm@e0f3086a8104f8fbbe49a2615b10401504a9533f
snes9x=libretro/snes9x@fae2fea08f74180759ef540ee94259213f503480
genesis_plus_gx=libretro/Genesis-Plus-GX@b9c2316441978d4015ba30e9a95d9b0e6f8ee981
gambatte=libretro/gambatte-libretro@77f2567d718b8973d02caa2daa8dce4953faf811
gpsp=libretro/gpsp@5819380c2ffb0900219d700a382ee68c464ebb99
mupen64plus_next=libretro/mupen64plus-libretro-nx@15bada85906593376e8fd697f1b0b3af3a20f512
kernel=lscorcia/linux-sony-psclassic@d716d7e29e0bf25569e20093d5260c13f618aaf1
Install: format a USB stick FAT32 with the name SONY, unzip at its root, plug it into the console and power on (README-INSTALL.txt). No Project Eris needed.
Lumen PSX v0.15.0
Flat launch animations. Checked in psc-sim only; not yet verified on the console.
Changed
- The launch animations are flat illustrations instead of 3D models (
launch = flat, the
design of lumen-design's "Launch: flat"). A field of the game's colour wipes over the
dashboard, the system's machine drops in and floats, and its medium goes into it: the
disc under the PlayStation's lid (no jewel case any more), the cartridge into the slot
of the Nintendo 64, Super Nintendo and Mega Drive, through the front door of the NES,
into the back of the Game Boy, Game Boy Advance and PSP, the coin into the arcade
cabinet. A machine with a screen lights it up in the tones of the game's cover and the
screen grows into the frame; the others light their lamp and hop. No white flash before
the fade. The cover on the medium is painted in five flat tones of its own palette.
Every layer is one textured quad: no models, no depth buffer. - A system without an illustration (homebrew apps, a minimal declaration) gets the generic
launch on the same field: the game's cover as a card that floats, turns once and grows
into the frame (docs/systems.md, "The launch").
Removed
- The 3D launch: the jewel and keep cases, the cartridges and consoles as models, the
coin and "INSERT COIN / CREDIT 1", the white flash, their shaders, the multisampled
target of the scene and the warm-up of all of it at start-up.assets/models/(2.3 MB)
andtools/models/are gone;src/main.cis 1,300 lines shorter. - Declaration keys that only that renderer read are ignored:
[media] shape,aspect,
color,art,media_artand[animation] launch,slot,idle. A game's own disc
or cartridge picture is no longer read. The settingsmsaaandscene_aaare ignored:
the window has no multisampling. - Assets nothing loaded: the pixel-art button icons (
assets/icons/, superseded by
assets/glyphs/;tools/make-icons.py) and the brand'slogo.pngandmark.png(their
SVG sources stay).
Commits since v0.14.1
- Remove the 3D launch: every system launches flat, unused assets gone (551199e)
- 0.15.0: flat launch animations (abb5c24)
- Flat launch animations: an illustration of the machine, its medium goes into it (b0d8b61)
Platform: psc-platform v2.4.1
psc-platform=v2.4.1
wayland=1.26.0
wayland-protocols=1.46
weston=16.0.2
libdrm=2.4.124
libseat=0.9.1
libdisplay-info=0.2.0
retroarch=RetroArch 1.22.2
joypad-autoconfig=v1.22.0
pcsx_rearmed=libretro/pcsx_rearmed@7b0e8f8fadfbce3d170d195b9d9eecaabfa08c8e
ppsspp=hrydgard/ppsspp@fa50bb1976065c4f8b1b47af227d367fe9771555
fceumm=libretro/libretro-fceumm@e0f3086a8104f8fbbe49a2615b10401504a9533f
snes9x=libretro/snes9x@fae2fea08f74180759ef540ee94259213f503480
genesis_plus_gx=libretro/Genesis-Plus-GX@b9c2316441978d4015ba30e9a95d9b0e6f8ee981
gambatte=libretro/gambatte-libretro@77f2567d718b8973d02caa2daa8dce4953faf811
gpsp=libretro/gpsp@5819380c2ffb0900219d700a382ee68c464ebb99
mupen64plus_next=libretro/mupen64plus-libretro-nx@15bada85906593376e8fd697f1b0b3af3a20f512
kernel=lscorcia/linux-sony-psclassic@d716d7e29e0bf25569e20093d5260c13f618aaf1
Install: format a USB stick FAT32 with the name SONY, unzip at its root, plug it into the console and power on (README-INSTALL.txt). No Project Eris needed.
Lumen PSX v0.14.1
The POWER button works: it suspends the console and brings the session back.
Fixed
- POWER suspends the console (red LED) and POWER again resumes the Lumen session; it was
ignored since 0.3.0 because the session did not come back. Cause: Sony's power manager
unmounts the USB stick before it suspends, and at the resume the kernel disconnects the
stick and finds it again a few seconds later, while Lumen's session scripts and its
button daemon ran from the stick and kept logs open on it.
Nowboot.sh,run.sh,power.shandlumen-buttonsrun from copies in RAM
(/tmp/lumen-run) and log there (logsync.shappends the logs to the stick);
power.sh suspendcloses the game (saved) and the frontend, writes the logs out and
unmounts the stick;power.sh resumewaits up to 20 s for the stick (sda1 / sdb1, label
SONY*), mounts it and only then starts the compositor and the frontend. If the stick
does not come back the console restarts instead of staying on a black screen.
Verified on the console with a FAT32 stick (three suspend / resume cycles); not tested
with an exFAT stick. An empty filelumen/debug/no-power-suspendon the stick turns it
off (POWER ignored, everything runs from the stick as before).
lumen/logs/suspend.logrecords every suspend and resume step. - The power LED no longer stays orange during a Lumen session: Sony's start-up leaves the
red LED on next to the green one and nothing turned it off;boot.shnow does.
Commits since v0.14.0
- 0.14.1: the POWER button suspends and resumes the session, power LED no longer orange (d54c84f)
- POWER suspends and resumes by default (verified on the console); debug/no-power-suspend turns it off (95766ec)
- Power LED: red off when the Lumen session starts (it stayed orange) (cf54c95)
- POWER (test switch): the session runs from RAM and the stick is unmounted around the suspend (d0883d7)
Platform: psc-platform v2.4.1
psc-platform=v2.4.1
wayland=1.26.0
wayland-protocols=1.46
weston=16.0.2
libdrm=2.4.124
libseat=0.9.1
libdisplay-info=0.2.0
retroarch=RetroArch 1.22.2
joypad-autoconfig=v1.22.0
pcsx_rearmed=libretro/pcsx_rearmed@7b0e8f8fadfbce3d170d195b9d9eecaabfa08c8e
ppsspp=hrydgard/ppsspp@fa50bb1976065c4f8b1b47af227d367fe9771555
fceumm=libretro/libretro-fceumm@e0f3086a8104f8fbbe49a2615b10401504a9533f
snes9x=libretro/snes9x@fae2fea08f74180759ef540ee94259213f503480
genesis_plus_gx=libretro/Genesis-Plus-GX@b9c2316441978d4015ba30e9a95d9b0e6f8ee981
gambatte=libretro/gambatte-libretro@77f2567d718b8973d02caa2daa8dce4953faf811
gpsp=libretro/gpsp@5819380c2ffb0900219d700a382ee68c464ebb99
mupen64plus_next=libretro/mupen64plus-libretro-nx@15bada85906593376e8fd697f1b0b3af3a20f512
kernel=lscorcia/linux-sony-psclassic@d716d7e29e0bf25569e20093d5260c13f618aaf1
Install: format a USB stick FAT32 with the name SONY, unzip at its root, plug it into the console and power on (README-INSTALL.txt). No Project Eris needed.
Lumen PSX v0.14.0
Menus that speak the dashboard's language, and a generic launch animation for systems
whose hardware Lumen does not know. Checked in psc-sim and built with the console
toolchain; not yet verified on the console.
Added
- Generic launch animation,
launch = cover: the game's cover turns once about itself
with a halo of its accent colour and flies into the camera. It is now the fallback for
every system that declares neither[animation] launchnor[media] shape, instead of
a made-up cartridge and console (or a CD case). Homebrew apps use it (they were shown as
a HuCard going into a PC Engine). Systems with a declared shape keep their hardware
animation.
Changed
- Menus redesigned to follow the dashboard's language (design source:
lumen-design): every menu is a glass card
over the dimmed game art, the focus is the same white ring as on the tiles, and no
selection is a filled bar of colour any more.- Settings: no longer an opaque full-screen list. The status row stays, the sections are
a rail on the left and the focused section is already open in a card on the right
(Cross / Right enter it, Circle / Left go back, Triangle closes). The Profile card
shows the avatar, the name and the games played. - Game menu: a card on the right, so the focused cover and its title stay visible;
"Play" is a white primary button. - File picker, on-screen keyboard and confirm dialogs: same cards, ring and buttons;
the destructive answer is tinted, never filled.
- Settings: no longer an opaque full-screen list. The status row stays, the sections are
src/ui.c: the shared components (scrim, card, ring, focus, kicker, text fitting).- The settings no longer clear the screen to a flat colour: the art keeps drawing under
them (one more blended full-screen pass; to be measured on the console). Theme keys
pillandpanelare no longer used by these menus. - Checked in psc-sim at 720p only; the in-game pause dialog still has the old look.
Commits since v0.13.0
- 0.14.0: menus in the dashboard's language, generic launch animation (988a81a)
- Menus redesigned as glass cards over the art; generic launch animation (cover) (588b2fb)
Platform: psc-platform v2.4.1
psc-platform=v2.4.1
wayland=1.26.0
wayland-protocols=1.46
weston=16.0.2
libdrm=2.4.124
libseat=0.9.1
libdisplay-info=0.2.0
retroarch=RetroArch 1.22.2
joypad-autoconfig=v1.22.0
pcsx_rearmed=libretro/pcsx_rearmed@7b0e8f8fadfbce3d170d195b9d9eecaabfa08c8e
ppsspp=hrydgard/ppsspp@fa50bb1976065c4f8b1b47af227d367fe9771555
fceumm=libretro/libretro-fceumm@e0f3086a8104f8fbbe49a2615b10401504a9533f
snes9x=libretro/snes9x@fae2fea08f74180759ef540ee94259213f503480
genesis_plus_gx=libretro/Genesis-Plus-GX@b9c2316441978d4015ba30e9a95d9b0e6f8ee981
gambatte=libretro/gambatte-libretro@77f2567d718b8973d02caa2daa8dce4953faf811
gpsp=libretro/gpsp@5819380c2ffb0900219d700a382ee68c464ebb99
mupen64plus_next=libretro/mupen64plus-libretro-nx@15bada85906593376e8fd697f1b0b3af3a20f512
kernel=lscorcia/linux-sony-psclassic@d716d7e29e0bf25569e20093d5260c13f618aaf1
Install: format a USB stick FAT32 with the name SONY, unzip at its root, plug it into the console and power on (README-INSTALL.txt). No Project Eris needed.
Lumen PSX v0.13.0
A picture for your profile, picked from the stick, and a dashboard whose focus moves up to
the system tabs and the profile. Checked in psc-sim and built with the console toolchain;
not yet verified on the console.
Added
- Profile avatar from a picture: Settings > Profile > Avatar opens a file picker on the
USB stick; the chosen PNG / JPG / BMP / GIF is cropped to its centre square, scaled to
256 px and saved asprofiles/<id>/avatar.png. "Remove avatar" goes back to the
initials. - Dashboard focus moves up: Up from the games reaches the system tabs (Left / Right change
the system, Cross or Down go back), Up again the profile (Cross opens Settings >
Profile). - File picker (
src/filepicker.c): a reusable card that browses the stick's folders
(folders first, files filtered by extension, preview of the highlighted image, last
folder remembered per use inpicker.<id>). Previews and the caller'saccept()run on
a worker thread, so a 12 MP photo never blocks a frame.src/image.cholds the decode /
crop / scale / atomic PNG write helpers.
Changed
- D-pad Up / Down no longer change the system directly: they move the dashboard focus.
L2 / R2 change the system from anywhere, as before.
Commits since v0.12.2
- 0.13.0: profile avatar from a picture, dashboard focus up to the tabs and the profile (ef4f2f8)
- Profile avatar from a picture (file picker); dashboard focus moves up to the tabs and the profile (ff7288d)
Platform: psc-platform v2.4.1
psc-platform=v2.4.1
wayland=1.26.0
wayland-protocols=1.46
weston=16.0.2
libdrm=2.4.124
libseat=0.9.1
libdisplay-info=0.2.0
retroarch=RetroArch 1.22.2
joypad-autoconfig=v1.22.0
pcsx_rearmed=libretro/pcsx_rearmed@7b0e8f8fadfbce3d170d195b9d9eecaabfa08c8e
ppsspp=hrydgard/ppsspp@fa50bb1976065c4f8b1b47af227d367fe9771555
fceumm=libretro/libretro-fceumm@e0f3086a8104f8fbbe49a2615b10401504a9533f
snes9x=libretro/snes9x@fae2fea08f74180759ef540ee94259213f503480
genesis_plus_gx=libretro/Genesis-Plus-GX@b9c2316441978d4015ba30e9a95d9b0e6f8ee981
gambatte=libretro/gambatte-libretro@77f2567d718b8973d02caa2daa8dce4953faf811
gpsp=libretro/gpsp@5819380c2ffb0900219d700a382ee68c464ebb99
mupen64plus_next=libretro/mupen64plus-libretro-nx@15bada85906593376e8fd697f1b0b3af3a20f512
kernel=lscorcia/linux-sony-psclassic@d716d7e29e0bf25569e20093d5260c13f618aaf1
Install: format a USB stick FAT32 with the name SONY, unzip at its root, plug it into the console and power on (README-INSTALL.txt). No Project Eris needed.
Lumen PSX v0.12.2
Games start again and no longer stall on a slow stick. psc-platform 2.4.1.
Fixed
- Every game closed a few seconds after starting (
retroarch exit=139) since 0.12.0:
RetroArch crashed on theGET_STATUSquestion oflumen-buttons' watchdog. Fixed in
psc-platform 2.4.1 (platform.lock), verified on the console. - Games on a disc image no longer stop for ~300 ms every couple of seconds on a slow USB
stick.run.shsets the kernel read-ahead of the stick to 2 MB (default: 128 KB), so
the image is read ahead in long bursts instead of small reads that each took ~200 ms.
Measured on the console with Bloody Roar II on a Kingston DT 101 G2: 32 stalls (11.4 s)
in 98 s before, 4 stalls (1.7 s) in 130 s with the 2 MB read-ahead.
Commits since v0.12.1
- 0.12.2: games start again and no longer stall on a slow stick (3f22aab)
- run.sh: 2 MB kernel read-ahead on the stick, games on a disc image no longer stall (cab4fa2)
Platform: psc-platform v2.4.1
psc-platform=v2.4.1
wayland=1.26.0
wayland-protocols=1.46
weston=16.0.2
libdrm=2.4.124
libseat=0.9.1
libdisplay-info=0.2.0
retroarch=RetroArch 1.22.2
joypad-autoconfig=v1.22.0
pcsx_rearmed=libretro/pcsx_rearmed@7b0e8f8fadfbce3d170d195b9d9eecaabfa08c8e
ppsspp=hrydgard/ppsspp@fa50bb1976065c4f8b1b47af227d367fe9771555
fceumm=libretro/libretro-fceumm@e0f3086a8104f8fbbe49a2615b10401504a9533f
snes9x=libretro/snes9x@fae2fea08f74180759ef540ee94259213f503480
genesis_plus_gx=libretro/Genesis-Plus-GX@b9c2316441978d4015ba30e9a95d9b0e6f8ee981
gambatte=libretro/gambatte-libretro@77f2567d718b8973d02caa2daa8dce4953faf811
gpsp=libretro/gpsp@5819380c2ffb0900219d700a382ee68c464ebb99
mupen64plus_next=libretro/mupen64plus-libretro-nx@15bada85906593376e8fd697f1b0b3af3a20f512
kernel=lscorcia/linux-sony-psclassic@d716d7e29e0bf25569e20093d5260c13f618aaf1
Install: format a USB stick FAT32 with the name SONY, unzip at its root, plug it into the console and power on (README-INSTALL.txt). No Project Eris needed.