Repository navigation
JTDX-VU v0.7.2
JTDX-VU for VUCG v0.7.2. New band spots and buttons for UHF/SHF and 8m, and a countdown on the Auto CQ button. Everything else is as in v0.7.1.
What's new in v0.7.2
- FT4 on 70cm and 23cm. FT4 has its own spots there now, 432.170 and 1296.170 MHz, as Frank PH2M uses them (FT8 stays on 432.174 / 1296.174).
- 8m band button (FT8 on 40.680 MHz, Region 1) for stations with an 8m permit. It is off by default: tick it in View > Band & Mode Buttons...
- These new rows reach your existing frequency list. On the first start of v0.7.2 the 70cm / 23cm FT4 and 8m rows are added once to each profile's list; no reset needed, and a row you delete later stays deleted.
- The Auto CQ button counts down. While Auto CQ is on it shows the time left before it stops calling, e.g. "Auto CQ 4:37" ("Auto CQ 12m" from 10 minutes up).
- In JTTY it is the Auto CQ time limit (Settings > JTTY), counted from when you switch Auto CQ on. At 0:00 the CQ on the air still finishes, then Auto CQ stops.
- In FT8 / FT4 / FT2 with Auto CQ (Call Non-Stop) on, it is the Tx watchdog, the same number as the "WD" box: it runs down while you transmit and holds still while Tx is idle.
AetherSDR users
AetherSDR 26.9.5 stopped sending TCI audio after a TCI client reconnected (aethersdr/AetherSDR#6006). That is fixed in AetherSDR 26.10.1: update AetherSDR if JTDX-VU says "no audio from the SDR program". The FlexRadio VITA-49 rig type avoids TCI altogether.
Downloads
| Platform | File | Runs on |
|---|---|---|
| macOS, Apple Silicon | JTDX-VU-0.7.2-macos-arm64.zip |
macOS 14 Sonoma or later |
| macOS, Intel | JTDX-VU-0.7.2-macos-x86_64.zip |
macOS 15 Sequoia or later |
| Windows x64 | JTDX-VU-0.7.2-windows-x64.zip |
Windows 10 / 11, 64-bit |
| Raspberry Pi / Linux arm64 | jtdx-vu-0.7.2-linux-arm64.deb |
Raspberry Pi OS / Debian 12 (bookworm), 64-bit |
Each file has a matching .sha256 checksum. JTDX-VU installs alongside a
stock JTDX on macOS and Windows; on the Pi the package replaces a stock
jtdx package.
How to install
macOS (Apple Silicon or Intel)
- Download the zip for your Mac (Apple menu > About This Mac: "Apple
M…" chip = arm64, "Intel" = x86_64) and double-click it to unzip. - Drag JTDX-VU into Applications.
- First launch. The app is ad-hoc signed, not notarized, so macOS
blocks the first open:- macOS 15 Sequoia and later: double-click JTDX-VU, click Done on
the warning, then open System Settings > Privacy & Security,
scroll down and click Open Anyway next to "JTDX-VU was
blocked", and confirm. - macOS 14 Sonoma: right-click (Control-click) JTDX-VU > Open >
Open. - Or, in Terminal:
xattr -dr com.apple.quarantine /Applications/JTDX-VU.app
- macOS 15 Sequoia and later: double-click JTDX-VU, click Done on
- Allow the microphone when asked; that is how macOS names access to
your radio's sound card. If you clicked Don't Allow, turn JTDX-VU on in
System Settings > Privacy & Security > Microphone. - Shared memory (one-time, every Mac). The decoder needs more SysV
shared memory than the macOS default; without it JTDX-VU stops with
"Unable to create shared memory segment". In Terminal:That lasts until the next restart. To make it permanent, downloadsudo sysctl -w kern.sysv.shmall=32768 kern.sysv.shmmax=33554432
Darwin/com.jtdx.sysctl.plistfrom
this repo and run
sudo cp com.jtdx.sysctl.plist /Library/LaunchDaemons/.
It may need redoing after a macOS upgrade. - Set up your callsign, radio and audio in JTDX-VU > Settings…
(Cmd+,).
Upgrading: quit JTDX-VU, replace the app in Applications with the
new one, and repeat step 3 if macOS asks. Settings
(~/Library/Preferences/JTDX-VU.ini) and data
(~/Library/Application Support/JTDX-VU) are kept.
Windows 10 / 11 (64-bit)
- Download
JTDX-VU-0.7.2-windows-x64.zip. Before unzipping,
right-click the zip > Properties, tick Unblock, OK; this saves
a warning for every file inside. - Right-click > Extract All… to a folder of your choice, for example
C:\JTDX-VU. No installer and no administrator rights are needed. - Run
bin\jtdx.exein that folder. If Windows SmartScreen says
"Windows protected your PC", click More info > Run anyway (the
program is not code-signed). Right-clickjtdx.exe> Send to >
Desktop (create shortcut) for a desktop icon. - If Windows Firewall asks, allow access on private networks (JTDX-VU
talks UDP to logging programs such as Log4OM, N1MM or JTAlert). - For rig control through OmniRig, install
OmniRig separately. Hamlib, TCI
and the other rig interfaces are built in.
Upgrading: quit JTDX-VU and extract the new zip over the old folder
(or into a new one). Settings are stored in your Windows profile, not
in the program folder, so they are kept.
Raspberry Pi / Debian 12 (arm64)
Needs a 64-bit Raspberry Pi OS (Bookworm) or Debian 12 on arm64 - a Pi 4
or Pi 5 is recommended.
- Download
jtdx-vu-0.7.2-linux-arm64.deb, then in a terminal in the
download folder:Keep thesudo apt update sudo apt install ./jtdx-vu-0.7.2-linux-arm64.deb
./- it tells apt to install the file rather than look for
a package by that name. apt pulls in Qt, Hamlib and FFTW. A stock
jtdxpackage can't be installed alongside; apt offers to remove it. - For CAT control over a USB serial cable, give your user access to
serial ports once, then log out and back in:sudo usermod -aG dialout $USER - Start JTDX-VU from the menu (Sound & Video / Ham Radio), or run
jtdxin a terminal.
Upgrading: install the new .deb the same way; settings are kept.
Removing: sudo apt remove jtdx-vu.
Credits
Based on JTDX by Igor Chernikov UA3DJY, Arvo Järve ES1JA and the HF community. JTDX is itself derived from WSJT-X by Joe Taylor K1JT, Bill Somerville G4WJS, Steve Franke K9AN, Nico Palermo IV3NWV and others.
JTTY is by Joe Taylor K1JT, Steve Franke K9AN, Rob Sherwood G4KLA and the WSJT-X development group (WSJT-X 3.2.0-rc1, GPL v3). FT2 was created by Martino Merola IU8LMC (ARI Caserta), with Salvatore Raccampo 9H1SR as lead C++ developer; it first went on air in Decodium on 2026-02-16 (ft2.it), and MSHV by Hrisimir Hristov LZ2HV added it in 2.76.5 on 2026-03-24. JTDX-VU uses no Decodium code: its FT2 is JTDX's own FT4 chain, with MSHV's implementation as the reference. The band/mode buttons, the "show only new" filter and the DXCC colour scheme follow MSHV by LZ2HV. The QO-100 logging follows MSHV. The FlexRadio VITA-49 backend and panel are ported from the MSHV-Mac port's native Flex backend.