Skip to content

JTDX-VU v0.7.5

Choose a tag to compare

@vu2cpl vu2cpl released this 17 Oct 00:17
· 58 commits to jtdx-vu since this release

JTDX-VU for VUCG v0.7.5. Fixes the start-up crash on Intel Macs, steadier TCI and FlexRadio connections, no more cut-off late transmissions, a smarter station queue with Halt and queue, up to four copies on one FlexRadio, and Apple-notarised Mac apps. Everything else is as in v0.7.4.

What's new in v0.7.5

  • Intel Macs: no more random crash at start-up (#5). 0.7.3 and 0.7.4 crashed about every other launch on Intel Macs; an uninitialised setting is now set before first use.
  • Mac apps are signed and notarised by Apple. They open with only the usual "downloaded from the internet" question - no more Privacy & Security > Open Anyway.
  • No cut-off late transmission. Turning on Enable Tx late in your Tx period no longer keys up and sends only the end of the message, which nobody can decode. A late start is allowed only in the first fifth of the period (FT8 3 s, FT4 1.5 s); after that Tx starts at your next period. Reported by Miguel KK4CDK.
  • AutoSeq keeps sending the report (#6). A station that called you and got your report, then finished a QSO with someone else (73 / RR73), is no longer restarted with your grid call. Reported by marinfyi.
  • The queue calls by itself. Right-click a decode > Queue CALL: when that station is next heard (its CQ, or RR73 / 73 to someone else with Settings > Notifications "RR73/73" ticked), AutoSeq calls it and now switches Enable Tx on by itself, moving your Tx period to the one opposite where it was heard.
  • Right-click Halt Tx > Halt and queue CALL. Stop calling a busy station: Tx stops, the DX call is cleared and the station is queued, so it is called again as soon as it is free. Asked for by Miguel KK4CDK.
  • Up to four copies on one FlexRadio. Run one JTDX-VU profile per slice (Slice A-D). A Flex allows only two GUI programs, so the third and fourth copies join the first one's station. Seen on four slices of KK4CDK's FLEX-6700.
  • FlexRadio over a VPN keeps reconnecting (#4). After a network drop, JTDX-VU keeps retrying until the link is back and returns to the frequency you were on, instead of giving up or tuning the slice to the radio's old frequency.
  • TCI with AetherSDR (#1). If the SDR program's opening message leaves out your receiver's frequency, JTDX-VU asks for it instead of reconnecting every 5 s with "TCI sent an unrecognized frequency".
  • Bypass button back (#2). It had been hidden under the Auto CQ button.
  • Safer double-click on a decode. Double-clicking a separator, blank or free-text line no longer flips your Tx period and drops the QSO; <yourcall> 73 / RR73 lines with no sender do nothing; TU RR73 no longer makes "RR73" the DX call. Contributed by Vinod VU3ESV (#3).
  • Windows: no blank rows in Band Activity after U.S.A. stations whose state came from the grid (Show US State on). Reported by Miguel KK4CDK.
  • Show US State also shows Canadian provinces (Canada:ON); the box now reads Show US State / VE province.
  • Country column lined up on bold (CQ / 73) lines, whatever the font.
  • Settings drop-downs and number boxes ignore a passing scroll - they change with the mouse wheel only once you click into them.

AetherSDR users

AetherSDR 26.9.5 stopped sending TCI audio after a TCI client reconnected (aethersdr/AetherSDR#6006). That is fixed in AetherSDR 26.10.1: update AetherSDR if JTDX-VU says "no audio from the SDR program". The FlexRadio VITA-49 rig type avoids TCI altogether.

Downloads

Platform File Runs on
macOS, Apple Silicon JTDX-VU-0.7.5-macos-arm64.zip macOS 14 Sonoma or later
macOS, Intel JTDX-VU-0.7.5-macos-x86_64.zip macOS 15 Sequoia or later
Windows x64 JTDX-VU-0.7.5-windows-x64.zip Windows 10 / 11, 64-bit
Raspberry Pi / Linux arm64 jtdx-vu-0.7.5-linux-arm64.deb Raspberry Pi OS / Debian 12 (bookworm), 64-bit

Each file has a matching .sha256 checksum. JTDX-VU installs alongside a
stock JTDX on macOS and Windows; on the Pi the package replaces a stock
jtdx package.

How to install

macOS (Apple Silicon or Intel)

  1. Download the zip for your Mac (Apple menu > About This Mac: "Apple
    M…" chip = arm64, "Intel" = x86_64) and double-click it to unzip.
  2. Drag JTDX-VU into Applications.
  3. First launch. The app is signed with a Developer ID and notarised
    by Apple: double-click JTDX-VU and confirm the "downloaded from the
    internet" question.
  4. Allow the microphone when asked; that is how macOS names access to
    your radio's sound card. If you clicked Don't Allow, turn JTDX-VU on in
    System Settings > Privacy & Security > Microphone.
  5. Shared memory (one-time, every Mac). The decoder needs more SysV
    shared memory than the macOS default; without it JTDX-VU stops with
    "Unable to create shared memory segment". In Terminal:
    sudo sysctl -w kern.sysv.shmall=32768 kern.sysv.shmmax=33554432
    That lasts until the next restart. To make it permanent, download
    Darwin/com.jtdx.sysctl.plist from
    this repo and run
    sudo cp com.jtdx.sysctl.plist /Library/LaunchDaemons/.
    It may need redoing after a macOS upgrade.
  6. Set up your callsign, radio and audio in JTDX-VU > Settings…
    (Cmd+,).

Upgrading: quit JTDX-VU, replace the app in Applications with the
new one. Settings
(~/Library/Preferences/JTDX-VU.ini) and data
(~/Library/Application Support/JTDX-VU) are kept.

Windows 10 / 11 (64-bit)

  1. Download JTDX-VU-0.7.5-windows-x64.zip. Before unzipping,
    right-click the zip > Properties, tick Unblock, OK; this saves
    a warning for every file inside.
  2. Right-click > Extract All… to a folder of your choice, for example
    C:\JTDX-VU. No installer and no administrator rights are needed.
  3. Run bin\jtdx.exe in that folder. If Windows SmartScreen says
    "Windows protected your PC", click More info > Run anyway (the
    program is not code-signed). Right-click jtdx.exe > Send to >
    Desktop (create shortcut) for a desktop icon.
  4. If Windows Firewall asks, allow access on private networks (JTDX-VU
    talks UDP to logging programs such as Log4OM, N1MM or JTAlert, and
    receives a FlexRadio's audio over UDP).
  5. For rig control through OmniRig, install
    OmniRig separately. Hamlib, TCI
    and the other rig interfaces are built in.

Upgrading: quit JTDX-VU and extract the new zip over the old folder
(or into a new one). Settings are stored in your Windows profile, not
in the program folder, so they are kept.

Raspberry Pi / Debian 12 (arm64)

Needs a 64-bit Raspberry Pi OS (Bookworm) or Debian 12 on arm64 - a Pi 4
or Pi 5 is recommended.

  1. Download jtdx-vu-0.7.5-linux-arm64.deb, then in a terminal in the
    download folder:
    sudo apt update
    sudo apt install ./jtdx-vu-0.7.5-linux-arm64.deb
    Keep the ./ - it tells apt to install the file rather than look for
    a package by that name. apt pulls in Qt, Hamlib and FFTW. A stock
    jtdx package can't be installed alongside; apt offers to remove it.
  2. For CAT control over a USB serial cable, give your user access to
    serial ports once, then log out and back in:
    sudo usermod -aG dialout $USER
  3. Start JTDX-VU from the menu (Sound & Video / Ham Radio), or run
    jtdx in a terminal.

Upgrading: install the new .deb the same way; settings are kept.
Removing: sudo apt remove jtdx-vu.

Credits

Based on JTDX by Igor Chernikov UA3DJY, Arvo Järve ES1JA and the HF community. JTDX is itself derived from WSJT-X by Joe Taylor K1JT, Bill Somerville G4WJS, Steve Franke K9AN, Nico Palermo IV3NWV and others.

JTTY is by Joe Taylor K1JT, Steve Franke K9AN, Rob Sherwood G4KLA and the WSJT-X development group (WSJT-X 3.2.0-rc1, GPL v3). FT2 was created by Martino Merola IU8LMC (ARI Caserta), with Salvatore Raccampo 9H1SR as lead C++ developer; it first went on air in Decodium on 2026-02-16 (ft2.it), and MSHV by Hrisimir Hristov LZ2HV added it in 2.76.5 on 2026-03-24. JTDX-VU uses no Decodium code: its FT2 is JTDX's own FT4 chain, with MSHV's implementation as the reference. The band/mode buttons, the "show only new" filter and the DXCC colour scheme follow MSHV by LZ2HV. The QO-100 logging follows MSHV. The FlexRadio VITA-49 backend and panel are ported from the MSHV-Mac port's native Flex backend. Show US State uses US Census Bureau state boundaries and the FCC amateur licence database (both public domain), with the same rules as DXClusterAggregator's WAS lookup.