Skip to content

Release v0.26.0: Connected systems, hardware models and debugging

Latest

Choose a tag to compare

@w1ne w1ne released this 15 Nov 23:19
· 0 commits to 88c90ca5f9b1aaf16e629b708ea4b1e87bcecc5b since this release
9174f94

Core changes since v0.25.0, released on 2026-09-22.

Install the CLI with LABWIRED_VERSION=v0.26.0 using the
installation guide.
Native Windows CLI and DAP builds require the
x64 Microsoft Visual C++ v14 Redistributable
for VCRUNTIME140.dll.

Features:

  • Run connected MCU systems over GPIO, SPI, I2C, UART and timed CAN. ESP32-C3
    nodes can connect, discover services, read, write and notify through BLE GATT.
    (#1303,
    #1362,
    #1257)
  • Use the Python SDK and pytest integration to drive firmware, inspect results
    and test multi-node worlds from diagrams.
    (#1245,
    #1315)
  • Add CPU and board paths for PIC16/PIC18/PIC24, RV64, AArch64, Cortex-R5F,
    Renesas RX, MIPS32 and CH32V003. These are documented firmware-specific
    capabilities, not complete peripheral coverage for each family.
    (#1432,
    #1553,
    #1567,
    #1606,
    #1608,
    #1610,
    #1611,
    #1612,
    #1698)
  • Expand analog device models, supply-aware MCU reset, motor winding circuits,
    routed resistance and INA219 current/voltage coupling.
    (#1251,
    #1506,
    #1688,
    #1697,
    #1790)
  • Add source-level stepping, call stacks, GDB watchpoints and branch coverage
    with LCOV/Cobertura export and coverage merging.
    (#1330,
    #1383,
    #1385,
    #1428)
  • Add STM32G0B1RE/TIOL112 IO-Link evaluation, desk-controller components,
    OV3660 JPEG output and more sensors, displays and drivers. LoRa parts model
    register/command behavior; they do not provide an RF air link.
    (#1702,
    #1701,
    #1397,
    #1605)
  • Drive NeoPixel/WS2812 LEDs from classic ESP32 RMT transmit channels through
    GPIO. RX, carrier and loop modes remain unsupported; status/address progress
    fields remain placeholders. (#1692)

Improvements:

  • Reduce idle-loop, GPIO-device and multicore scheduling work while retaining
    deterministic event boundaries. Performance remains workload-specific.
    (#1415,
    #1767,
    #1776)
  • Migration: coverage source paths now include directories. Update report/editor
    mappings that expect bare filenames. Unreached branches now count in totals,
    so reported branch coverage can decrease without a test regression.
    (#1385)
  • Rust integrations using GPIO-net internals must replace
    Machine::isolate_net_pads with join_net_pads and use the shared PinPort
    interface. Corrected pull levels, DMA timing and cycle counters can change
    old expected results; review affected baselines. See the
    detailed changelog.
  • Optional native Cortex-A7/R5F system execution supports x86_64 Linux GNU with
    explicit native features and the native-system profile. It is separate from
    the default/browser engine; follow the backend limits.
  • Known limit: the STM32G071 Tier-1 SPI check remains blocked on spi-rxne.
    See the peripheral validation matrix.
  • The in-core analog adapter implements a defined SPICE subset. Unsupported
    vendor-model parameters, temperature directives and control scripts can be
    accepted and ignored. Check the supported models and limits.

Fixes:

  • Avoid device-clock overhead before a deadline and on empty Renesas RIIC
    controllers. Preserve late device attachment and absolute-counter reloads.
  • Include required compile-time JSON inputs in the Python source distribution.
    CI rebuilds and tests a wheel from the extracted source archive before
    publication.
  • Use the documented classic ESP32 RMT reset values and register permissions,
    preserving read-only status/address/interrupt registers and read/write DATE.
  • Preserve complete messages when UART and USB console output share leading
    characters. Mirrored ROM lines remain suppressed in the untapped-console
    diagnostic. Release CI now runs the eight C3 ROM, OLED, console and BLE
    browser API regressions.
  • Fix ESP32 IDF 5 mutex/Serial startup, LEDC duty completion and Preferences/NVS
    writes. (#1708,
    #1725,
    #1759)
  • Correct RP2040 flash erase/program behavior and USB interrupt timing.
    (#1788,
    #1798)
  • Add AVR EEPROM and watchdog behavior used by stock firmware.
    (#1748,
    #1750)
  • Correct servo pulse measurement and AHT20 reset/calibration status so driver
    initialization can complete. (#1800,
    #1803)
  • Parse the secure-boot example's P-256 public keys from their DER/SPKI
    structure. Keys containing 0x04 inside a coordinate now provision correctly.
    (#1807)
  • Report the machine clock in observer-path cycle totals, keeping result
    metrics and cycle limits consistent. Instruction counts retain their
    existing meaning. (#1808)
  • Complete the STM32F103RB BME280 and classic ESP32 GPIO/UART onboarding
    descriptors, with execution tests for SysTick and timer interrupts.
    (#1812)

Full changes.