Skip to content

Releases

vm-init v1.11.1

Choose a tag to compare

@github-actions github-actions released this 13 Sep 18:19

Fix

Fix a first-run hang after APT installs the configuration tools, reproduced on fresh OrbStack Ubuntu 26.04 ARM64 machines. Timed commands now keep terminal access with timeout --foreground when stdin, stdout, or stderr is attached to a terminal. This prevents terminal operations from suspending APT before the setup wizard opens. Commands without terminal streams retain process-group timeouts.

Regression tests cover terminal reads, terminal mode changes with redirected stdin, timeout expiry, and failure status propagation.

Validated with fresh OrbStack setup, a repeat run with unchanged shell settings, and successful verification after reboot.

vm-init v1.11.1

Install

curl -fsSL https://raw.githubusercontent.com/wagga40/vm-init/main/scripts/install.sh | sudo bash
sudo vm-init
sudo vm-init status

The installer verifies the release tarball. The first vm-init run prepares tools, guides configuration, and applies it.
Standalone bundles also include offline recovery: sudo vm-init repair dns.
See README.md for checksum-verified single-file installation, account selection, and automation.

Checksums

bd6cd4f2019b85e3942ed30fbf1688c7a5b2ae443338a1b33370b4c63440696d  vm-init.tar.gz
186d6d3751efcf6843b88006bad3e3cbaa3c073c7daff63442d1e939907d018f  vm-init

vm-init v1.11.0

Choose a tag to compare

@github-actions github-actions released this 13 Sep 15:11

vm-init now uses one installation layout and one first-run configuration flow, including the single-file distribution.

  • Keep application code, configuration, state, and logs under /opt/vm-init/{app,bin,config,state,logs}. Updates preserve saved data, and custom prefixes remain supported.
  • Run sudo vm-init to prepare missing tools, choose accounts and features, and apply the configuration. Later runs reuse the saved settings. The single-file bundle installs itself on its first normal run.
  • Configure multiple existing users, including root, with --user root,alice,bob, repeated --user flags, or --all-users.
  • Use consistent command and flag aliases, such as vm-init update, vm-init --update, and vm-init -u.
  • Find a shorter quick start in the README, with configuration, operations, and development details in docs/.

Upgrade with sudo vm-init update, then run sudo vm-init. Existing configuration and recovery data migrate on the next normal run; compatibility links preserve old recovery paths. Upgrades through the v1.10.1 installer also retain custom configuration.

For a new installation:

curl -fsSL https://raw.githubusercontent.com/wagga40/vm-init/v1.11.0/scripts/install.sh | sudo bash -s -- --version v1.11.0
sudo vm-init

Both the release archive and single-file bundle are attached with SHA-256 checksum files. See the README for verified bundle installation.

vm-init v1.10.1

Choose a tag to compare

@github-actions github-actions released this 13 Sep 13:52

vm-init v1.10.1

Install

curl -fsSL https://raw.githubusercontent.com/wagga40/vm-init/main/scripts/install.sh | sudo bash
sudo vm-init setup
sudo vm-init status

The installer prepares configuration tools and verifies the release tarball.
Standalone bundles also include offline recovery: sudo vm-init repair dns.
See README.md for checksum-verified single-file installation, account selection, and automation.

Checksums

5a9962be210c9acb92de6679555e408ba379953f5877ae705dc3019475dbd435  vm-init.tar.gz
8064b9fc90829b31223378eeb9edb8f31d232d5a8211e64b7a95bc850f3aa27e  vm-init

vm-init v1.10.0

Choose a tag to compare

@github-actions github-actions released this 13 Sep 13:18

vm-init v1.10.0

Install

curl -fsSL https://raw.githubusercontent.com/wagga40/vm-init/main/scripts/install.sh | sudo bash
sudo vm-init setup
sudo vm-init status

The installer prepares configuration tools and verifies the release tarball.
Standalone bundles also include offline recovery: sudo vm-init repair dns.
See README.md for checksum-verified single-file installation, account selection, and automation.

Checksums

96ef2da5ad1e0d0b24ff72d7f9b011d2d9742cce49f5e0d98fb7077f97d36c8c  vm-init.tar.gz
126d58d74cabcb902be57700d44996ecb973cede76a0b5516ccf230b67b12fa6  vm-init

vm-init v1.9.2

Choose a tag to compare

@github-actions github-actions released this 13 Sep 10:28

vm-init v1.9.2

Install

curl -fsSL https://raw.githubusercontent.com/wagga40/vm-init/main/scripts/install.sh | sudo bash
sudo vm-init setup
sudo vm-init status

The installer prepares configuration tools and verifies the release tarball.
Standalone bundles also include offline recovery: sudo vm-init repair dns.
See README.md for checksum-verified single-file installation, account selection, and automation.

Checksums

afb240bae84efb1399544aca5e415832b66fb337826fa40e208c250fc1ab8d0a  vm-init.tar.gz
39fca34d039e4f2a96544fe8007dbb37d69e2d4c9999b478700c35420582d1c1  vm-init

vm-init v1.9.1

Choose a tag to compare

@github-actions github-actions released this 13 Sep 09:55

vm-init v1.9.1

Fixes

  • Recognize OpenSSH and other application profiles in verbose UFW output, including IPv6. Preserve source-specific Fail2Ban rules.
  • Accept repeated DNS entries for the same proxy endpoint. Continue rejecting unexpected servers and ports.
  • Replace earlier global resolver entries when configuring dnsproxy and report success only after routing verification completes.
  • Clearly report restored firewall and DNS settings after a failed transaction.
  • Name conflicting Fish aliases without displaying generated verification code.

Validation

Regression tests cover the reported UFW and DNS output formats. CI also exercises real UFW, systemd-resolved, dnsproxy, firewall confirmation, and rollback in isolated Ubuntu 24.04 and 26.04 containers.

Install

curl -fsSL https://raw.githubusercontent.com/wagga40/vm-init/main/scripts/install.sh | sudo bash
sudo vm-init setup
sudo vm-init status

The installer prepares configuration tools and verifies the release tarball.
Standalone bundles also include offline recovery: sudo vm-init repair dns.
See README.md for checksum-verified single-file installation, account selection, and automation.

Checksums

bcf85fc5ee5cdec89c18b469a58bfcc71bd9ad895aeca3af789d9f47df495b1e  vm-init.tar.gz
95f6ae1c49ca6668711ee83c0a86404540987739f12949e1eba1f594d6f02ac7  vm-init

vm-init v1.9.0

Choose a tag to compare

@github-actions github-actions released this 13 Sep 09:14

vm-init v1.9.0

Install

curl -fsSL https://raw.githubusercontent.com/wagga40/vm-init/main/scripts/install.sh | sudo bash
sudo vm-init setup
sudo vm-init status

The installer prepares configuration tools and verifies the release tarball.
Standalone bundles also include offline recovery: sudo vm-init repair dns.
See README.md for checksum-verified single-file installation, account selection, and automation.

Checksums

57b11d5cfdc0c16b5922432e9bdae7fc0303bd91f7dc50875e5b478e3881fe50  vm-init.tar.gz
7da3c3aa5dc62e7180c332fa7cc390084a9a0b8b8515252a725b621f1a866c74  vm-init

vm-init v1.8.0

Choose a tag to compare

@github-actions github-actions released this 18 Aug 14:05

vm-init v1.8.0

Install (single-file, recommended)

curl -fsSL https://github.com/wagga40/vm-init/releases/latest/download/vm-init \
  -o /usr/local/sbin/vm-init && sudo chmod +x /usr/local/sbin/vm-init
sudo vm-init --dry-run                  # preview with the embedded default
sudo vm-init                            # run

# Optional: materialize the default config so you can edit it.
vm-init --write-default-config          # writes ./vm-init.yml (no sudo)
sudo vm-init --config "$(pwd)/vm-init.yml"

Install (tarball)

curl -fsSL https://raw.githubusercontent.com/wagga40/vm-init/main/scripts/install.sh \
  | sudo bash

Checksums

720670dc731ece1a508944148a94ab335dd1ffb2a2939caeda1e50ff5f7fa942  vm-init.tar.gz
7555d9fe455526eef415926c4ff9a5d5e38f14182e945357f564608f13c80afe  vm-init

vm-init v1.7.0

Choose a tag to compare

@github-actions github-actions released this 18 Aug 10:42

vm-init v1.7.0

Install (single-file, recommended)

curl -fsSL https://github.com/wagga40/vm-init/releases/latest/download/vm-init \
  -o /usr/local/sbin/vm-init && sudo chmod +x /usr/local/sbin/vm-init
sudo vm-init --dry-run                  # preview with the embedded default
sudo vm-init                            # run

# Optional: materialize the default config so you can edit it.
vm-init --write-default-config          # writes ./vm-init.yml (no sudo)
sudo vm-init --config "$(pwd)/vm-init.yml"

Install (tarball)

curl -fsSL https://raw.githubusercontent.com/wagga40/vm-init/main/scripts/install.sh \
  | sudo bash

Checksums

247c61e70f89d54ff66ef92cff50dfb67852f418e871be2252ae5a4239ec8437  vm-init.tar.gz
257a74cc8dfee49f4838b2f6d04929560ace42182490adecf84cd80c5c8bfc94  vm-init

vm-init v1.6.2

Choose a tag to compare

@github-actions github-actions released this 16 May 18:50

vm-init v1.6.2

Install (single-file, recommended)

curl -fsSL https://github.com/wagga40/vm-init/releases/latest/download/vm-init \
  -o /usr/local/sbin/vm-init && sudo chmod +x /usr/local/sbin/vm-init
sudo vm-init --dry-run                  # preview with the embedded default
sudo vm-init                            # run

# Optional: materialize the default config so you can edit it.
vm-init --write-default-config          # writes ./vm-init.yml (no sudo)
sudo vm-init --config "$(pwd)/vm-init.yml"

Install (tarball)

curl -fsSL https://raw.githubusercontent.com/wagga40/vm-init/main/scripts/install.sh \
  | sudo bash

Checksums

47e23641f0651acd66875b4621290668754fe1a0adbe8a57ee3fb2c0776e41d4  vm-init.tar.gz
5a962f66cec00897aed58099b13787a972afd9caf5604d566fe447736ff84cd9  vm-init