Wattuino

Arduino compatible Boards and Modules.

• Wattuino Board Support Package for Arduino IDE.
• Documentation on learn.watterott.com
• Open-Source and released under the Creative Commons Attribution Share-Alike License.

Wattuino RC

• Microchip SAMW25 Module (SAMD21 ARM Cortex-M0+ and WINC1500 WiFi/WLAN SoC)
• USB CDC+MSC Bootloader (Arduino compatible)
• 5V tolerant IOs
• Dual Full-Bridge Motor Drivers (Allegro Micro A3909)
• MicroUSB connector for programming/communication
• PCB Size: 70mm x 50mm

Wattuino Uno

• Microchip AVR ATmega328P @ 16 MHz (external resonator)
• OptiBoot Bootloader with auto baud rate detection (Arduino compatible)
• FTDI FT231X USB-UART-Bridge
• USB-B or MicroUSB connector for programming/communication
• PCB Size: 68.58mm x 53.34mm

Wattuino Pro Mini

• Microchip AVR ATmega328P @ 16 MHz or 8 MHz (external resonator)
• OptiBoot Bootloader with auto baud rate detection (Arduino compatible)
• All pins of the AVR are available (also ADC6, ADC7)
• FTDI connector for programming/communication
• PCB Size: 33.02mm x 17.78mm

Wattuino Pro Mini PB

• Microchip AVR ATmega328PB @ 16 MHz or 8 MHz (external resonator)
• OptiBoot Bootloader with auto baud rate detection (Arduino compatible)
• All pins of the AVR are available (also PE0/SDA1, PE1/SCL1, PE2/ADC6, PE3/ADC7)
• FTDI connector for programming/communication
• PCB Size: 33.02mm x 17.78mm

Wattuino Nanite 841

• Microchip AVR ATtiny841 @ 8 MHz (internal clock) with USART, SPI, I2C Slave, ADC, EEPROM
• Micronucleus USB Bootloader (Arduino compatible)
• Designed by cpldcpu
• 14-Pin DIP and pin-compatible with 14-Pin SOIC ATtiny841
• MicroUSB connector for programming/communication
• PCB Size: 24.13mm x 10.16mm

Wattuino Nanite 85

• Microchip AVR ATtiny85 @ 16.5 MHz (internal clock) with USI, ADC, EEPROM
• Micronucleus USB Bootloader (Arduino compatible)
• Based on the original Nanite 85 design by cpldcpu
• Pin-compatible with 8-Pin DIP ATtiny85
• MicroUSB connector for programming/communication
• PCB Size: 17.46mm x 10.16mm