Skip to content

GSF 1.2.0 Kedavra

Choose a tag to compare

@github-actions github-actions released this 22 Oct 02:15
89cacf2

GSF Kedavra

GSF 1.2.0 Kedavra: frame generation for Steam Deck in Gaming Mode, inside a patched Gamescope, controlled from Decky. No Lossless Scaling. No launch command.

Install: Decky → Settings → Developer → Install plugin from zip → GSF-Kedavra-1.2.0.zip, then Setup → Reinstall Gamescope KEDAVRA and reboot (the engine changed). The zip installs over 1.1.x in place. Details: README.

New in 1.2.0

This release brings the engine that GFG Extreme 3.0 runs to the standalone plugin, plus a fix for fast turns at a low base frame rate.

  • HDR games. HDR10 (PQ) and scRGB games get generation in float frames. Before, they passed through without it. HDR games in the panel turns this off. Tested in software only, not on a Deck.

  • ×3.75 in Auto. With Allow ×3.75 on, Auto may hold a game that cannot keep 30 at 24 FPS (90 Hz: ×3.75, each real frame shown 3 or 4 refreshes) instead of repeating frames. The panel and the HUD show ×3.75 exactly. It is off by default: at 24 the image is stretched further, so artifacts are easier to see.

  • Fast turns at a low base frame rate. At base 24 a fast camera turn moves 150 px and more per game frame, past the reach of the motion search. The engine then lost the camera and fell back to repeated frames, or produced broken frames. The coarse search now follows the camera motion of the previous frame pair. In a test sequence turning at up to 175 px per game frame (base 24, phases of ×3.75, lavapipe):

    • worst frame 14.1 → 23.1 dB
    • frame-to-frame change error 14.5 → 5.9
    • false scene cuts 3 → 0

    At ×3 the camera sequence is practically unchanged (27.8 dB on average; worst frame 23.5 → 23.3 dB). The other test scenes give the same numbers as 1.1.2.

  • Engine from GFG Extreme 3.0: filters after generation (kfg_post, used by GFG; off in the standalone plugin), a policy revision in the status, and Gamescope built with the /usr prefix so SteamOS's display scripts load. That last one is what makes HDR available on the Deck OLED.

  • The plugin restores its engine options after Gamescope restarts.

  • Repair fix (found in an external review): the block repair pass read one neighbour before loading it, so whether a block got repaired depended on an undefined value. All nine neighbours are now loaded first. Threshold checks in warp and repair compare squared lengths instead of taking square roots. lavapipe: within ±0.02 dB in every scene.

  • Stricter Pace analysis. Refresh slots with no flip row at all now count as missed. Before, only rows marked "repeat" did. Long unexplained gaps are no longer dropped from the statistics. As a result, older traces score worse than before: the best Auto trace goes from 0.27% to an estimated 0.78% missed.

Status

Experimental. The image numbers are software results (lavapipe). Nothing in 1.2.0 has been measured on a Steam Deck yet, HDR included. Record a trace in Pace with ×3 and with ×3.75, then send them with Save report to Desktop.


GSF 1.2.0 Kedavra: генерация кадров для Steam Deck в игровом режиме внутри пропатченного Gamescope, управление из Decky. Без Lossless Scaling. Без команд запуска.

Установка: Decky → Настройки → Разработчик → Установить плагин из zip → GSF-Kedavra-1.2.0.zip, затем Setup → Reinstall Gamescope KEDAVRA и перезагрузка (движок изменился). Zip ставится поверх 1.1.x. Подробно: README.

Что нового в 1.2.0

В этом выпуске отдельный плагин получает движок, на котором работает GFG Extreme 3.0, и исправление быстрых поворотов при низком базовом FPS.

  • HDR-игры. Игры в HDR10 (PQ) и scRGB теперь получают генерацию в кадрах с плавающей точкой. Раньше они проходили без неё. Переключатель HDR games на панели её выключает. Проверено только программно, на Deck не проверялось.

  • ×3,75 в Auto. Если включить Allow ×3.75, Auto может держать игру, которая не выдерживает 30, на 24 FPS (90 Гц: ×3,75, каждый настоящий кадр показывается 3 или 4 обновления), вместо повторов кадров. Панель и HUD показывают ровно ×3,75. По умолчанию выключено: на 24 картинка растягивается сильнее, и артефакты заметнее.

  • Быстрые повороты при низком базовом FPS. На базе 24 быстрый поворот камеры сдвигает картинку на 150 px и больше за кадр игры, дальше, чем доставал поиск движения. Движок терял камеру и откатывался к повторам кадров или выдавал сломанные кадры. Теперь грубый поиск следует за движением камеры из прошлой пары кадров. Тестовая последовательность с поворотом до 175 px за кадр игры (база 24, фазы ×3,75, lavapipe):

    • худший кадр 14,1 → 23,1 дБ
    • ошибка изменения между кадрами 14,5 → 5,9
    • ложных смен сцены 3 → 0

    На ×3 последовательность камеры практически не изменилась (в среднем 27,8 дБ, худший кадр 23,5 → 23,3 дБ). Остальные тестовые сцены дают те же цифры, что и 1.1.2.

  • Движок из GFG Extreme 3.0:

    • фильтры после генерации (kfg_post: их использует GFG, в отдельном плагине они выключены);
    • номер политики в статусе;
    • сборка Gamescope с префиксом /usr, чтобы загружались скрипты дисплея SteamOS. Именно это открывает HDR на Deck OLED.
  • После перезапуска Gamescope плагин восстанавливает свои настройки движка.

  • Исправление repair (найдено при внешнем ревью): проход починки блоков читал одного соседа до того, как загрузил его, поэтому решение чинить блок или нет зависело от неопределённого значения. Теперь сначала загружаются все девять соседей. Пороговые проверки в warp и repair сравнивают квадраты длин вместо корней. На lavapipe отличие в пределах ±0,02 дБ во всех сценах.

  • Строже анализ Pace. Слоты обновления, для которых нет строки flip, теперь считаются пропущенными. Раньше считались только строки с пометкой «repeat». Длинные необъяснённые паузы больше не выбрасываются из статистики. Поэтому старые трассы оцениваются хуже, чем раньше: лучшая трасса Auto вместо 0,27% получает оценку 0,78% пропусков.

Статус

Экспериментально. Цифры качества получены программно на lavapipe. Ничего из 1.2.0 на Steam Deck ещё не измерено, включая HDR. Запишите трассу в Pace с ×3 и с ×3,75 и пришлите их через Save report to Desktop.