Repository navigation
GSF 1.3.1 Kedavra
GSF 1.3.1 Kedavra: frame generation in Gaming Mode, inside a patched Gamescope, controlled from Decky. Now for the Steam Machine on a TV as well as the Steam Deck. No Lossless Scaling. No launch command.
Install: Decky → Settings → Developer → Install plugin from zip → GSF-Kedavra-1.3.1.zip, then Setup → Reinstall Gamescope KEDAVRA and reboot (the engine changed). The zip installs over 1.3.0 in place. Details: README.
New in 1.3.1: Steam Machine
A Steam Machine usually drives a TV at 60 Hz (some at 120 Hz), and its games run at 1080p by default, at 4K in lighter games. 1.3.1 brings the Deck engine there without spending the bigger GPU on it.
-
Motion analysis capped by size. Up to 1536×960 pixels (1.44× the Deck's screen) the analysis runs at the game's own size, as before. Above that, it runs on the frame scaled down to that size. Only the final warp runs at the game's own resolution. On the Deck nothing changes: at 1280×800 the output is identical to 1.3.0, bit for bit.
Cost per pair of game frames at ×3, lavapipe (a CPU Vulkan driver, objects scene), relative to the Deck:
Game resolution Analysis capped (1.3.1) Full-size analysis 1280×800 (Deck) 1.0× 1.0× 1920×1080 1.37× 1.8× 3840×2160 1.74× (most of it is the 4K warp) 6.9× Image at 1080p against a full-size analysis (same scenes, same motion, lavapipe):
- at ×3, the camera's worst frame is 24.0 dB against 23.9, and occlusion 34.9 against 34.2 dB;
- slow pans are 32.6 against 34.2 dB;
- at base 24, most scenes are better (near object 29.7 against 27.4 dB, dolly 29.2 against 28.4 dB) and slow pans are equal.
At the Deck's own size (1280×800) slow pans on a 1080p TV lost 4.5 dB. That is why the cap is 1.44× the Deck and not 1×.
-
Auto on a TV. Auto never goes above ×3:
- 60 Hz: the game is held at 30 and doubled (×2). It no longer drops to base 20 at ×3.
- 120 Hz: the cap goes from 40 to 60 (×3 to ×2).
Allow ×2.5 at 60 Hz lets Auto hold a game that cannot keep 30 at 24. ×4 at 120 Hz (base 30) is not recommended. It is off and lives in Setup → Allow ×4 in Auto. On the Deck, Allow ×3.75 stays where it was.
-
VRR is paused while generation is on. Generated frames need a fixed refresh. With Auto or Custom selected, Gamescope keeps adaptive sync off, and the panel says so. Off gives VRR back. It switches with the mode, not per game, because each switch is a modeset (a black screen on many TVs).
-
Panel and HUD follow the screen.
- The Custom slider goes up to the display's refresh rate.
- The low-base toggle names the real multiplier for this refresh rate.
- The in-game HUD keeps its share of the screen on a 1080p or 4K TV.
-
Status:
analysis_width,analysis_height,vrr_heldandoutput_heightare new fields.kfg_analysis_pixels(0 = full size) andkfg_hold_vrrare new engine options for testing.
Status
Experimental. Nothing in 1.3.1 has run on a Steam Machine: there is no hardware here, and every number above is software (lavapipe). The Steam Machine ships SteamOS with Gamescope and Decky works there, so the plugin installs the same way, but that is unconfirmed too. On the Deck the engine output is unchanged from 1.3.0. To check on a Steam Machine:
- Play a game at 60 Hz in Auto, with HDR on and with HDR off.
- Record a trace in Pace and press Save report to Desktop.
- Send
gpu_us_avg,gpu_analysis_us_avgandanalysis_widthfrom the report.
GSF 1.3.1 Kedavra: генерация кадров в игровом режиме внутри пропатченного Gamescope, управление из Decky. Теперь не только для Steam Deck, но и для Steam Machine с телевизором. Без Lossless Scaling. Без команд запуска.
Установка: Decky → Настройки → Разработчик → Установить плагин из zip → GSF-Kedavra-1.3.1.zip, затем Setup → Reinstall Gamescope KEDAVRA и перезагрузка (движок изменился). Zip ставится поверх 1.3.0. Подробно: README.
Что нового в 1.3.1: Steam Machine
Steam Machine обычно подключена к телевизору на 60 Гц (иногда 120 Гц). Игры по умолчанию идут в 1080p, лёгкие в 4K. 1.3.1 переносит туда движок Deck и не тратит на него большой GPU.
-
Анализ движения ограничен по размеру. До 1536×960 пикселей (1,44 экрана Deck) анализ, как и раньше, идёт в собственном разрешении игры. Выше этого он идёт по кадру, уменьшенному до этого размера. В полном разрешении игры работает только финальный warp. На Deck ничего не меняется: в 1280×800 результат совпадает с 1.3.0 бит в бит.
Стоимость пары кадров игры на ×3, lavapipe (Vulkan на процессоре, сцена objects), относительно Deck:
Разрешение игры Анализ ограничен (1.3.1) Полный анализ 1280×800 (Deck) 1,0× 1,0× 1920×1080 1,37× 1,8× 3840×2160 1,74× (в основном это warp в 4K) 6,9× Картинка в 1080p по сравнению с полным анализом (те же сцены и то же движение, lavapipe):
- на ×3 худший кадр камеры 24,0 дБ против 23,9 дБ, перекрытие 34,9 против 34,2 дБ;
- медленные панорамы 32,6 против 34,2 дБ;
- на базе 24 большинство сцен лучше (near object 29,7 против 27,4 дБ, dolly 29,2 против 28,4 дБ), медленные панорамы одинаковые.
При размере Deck (1280×800) медленные панорамы на телевизоре 1080p теряли 4,5 дБ. Поэтому предел взят 1,44 экрана Deck, а не 1.
-
Auto на телевизоре. Auto никогда не поднимается выше ×3:
- 60 Гц: игра держится на 30 и удваивается (×2). Она больше не падает до базы 20 на ×3.
- 120 Гц: лимит от 40 до 60 (от ×3 до ×2).
Allow ×2.5 на 60 Гц позволяет Auto держать на 24 игру, которая не выдерживает 30. ×4 на 120 Гц (база 30) не рекомендуется. Он выключен и находится в Setup → Allow ×4 in Auto. На Deck Allow ×3.75 остался на прежнем месте.
-
VRR на паузе, пока работает генерация. Сгенерированным кадрам нужна постоянная частота. Когда выбран Auto или Custom, Gamescope держит адаптивную синхронизацию выключенной, и панель об этом пишет. Off возвращает VRR. Переключение идёт вместе с режимом, а не для каждой игры, потому что каждое переключение это modeset (на многих телевизорах чёрный экран).
-
Панель и HUD подстраиваются под экран.
- Ползунок Custom доходит до частоты экрана.
- Переключатель низкой базы показывает настоящий множитель для этой частоты.
- HUD в игре занимает ту же долю экрана на телевизоре 1080p или 4K.
-
Статус: новые поля
analysis_width,analysis_height,vrr_heldиoutput_height. Новые настройки движка для проверки:kfg_analysis_pixels(0 = полный размер) иkfg_hold_vrr.
Статус
Экспериментально. Ничего из 1.3.1 не запускалось на Steam Machine: железа здесь нет, все цифры выше программные (lavapipe). Steam Machine поставляется со SteamOS и Gamescope, Decky там работает, поэтому плагин ставится так же, но это тоже не подтверждено. На Deck результат движка не изменился по сравнению с 1.3.0. Как проверить на Steam Machine:
- Сыграйте в игру на 60 Гц в Auto, с HDR и без него.
- Запишите трассу в Pace и нажмите Save report to Desktop.
- Пришлите из отчёта
gpu_us_avg,gpu_analysis_us_avgиanalysis_width.
