Skip to content

Releases

v1.3.2

Choose a tag to compare

@github-actions github-actions released this 18 Nov 09:57

讣告 1.3.2

Windows 版 Codex 每次启动不再报 Hook failed · hook exited with code 1。

  • Codex 的 Windows hook 命令改用 PowerShell 写法:Windows 版 Codex 用 PowerShell 运行 hook,以前写进 ~/.codex/hooks.json 的 "C:/…/obit.exe" hook codex 在 PowerShell 里是语法错误,讣告的 hook 一条都没跑起来。现在写成 & "C:/…/obit.exe" hook codex。升级后运行一次 obit init -g --agent codex(开了删除护栏就加 --guard-rm)换掉旧条目,再在 Codex 里输入 /hooks 信任新的 hook。

升级:Windows 用 scoop update obituary,或再运行一次安装脚本(默认装最新版,国内加 -Mirror cn);macOS 用 brew upgrade --cask obituary;macOS / Linux 也可以再运行一次 bash install.sh(国内加 --mirror cn)。


Obituary 1.3.2

Native Windows Codex no longer reports Hook failed · hook exited with code 1 at every start.

  • Codex's Windows hook command now uses PowerShell syntax. Codex on Windows runs hooks in PowerShell, where the "C:/…/obit.exe" hook codex written to ~/.codex/hooks.json was a parse error, so none of Obituary's hooks ran. It is now & "C:/…/obit.exe" hook codex. After upgrading, run obit init -g --agent codex once (add --guard-rm if the delete guard is on) to replace the old entries, then trust the new hooks with /hooks in Codex.

Upgrade on Windows with scoop update obituary, or run the install script again (it installs the latest release; add -Mirror cn in mainland China). On macOS, brew upgrade --cask obituary; on macOS and Linux, running bash install.sh again works too (--mirror cn in mainland China).

v1.3.1

Choose a tag to compare

@github-actions github-actions released this 14 Nov 20:02

讣告 1.3.1

很大的文件夹现在第一次就能埋进墓地。

  • obit bury 和删除护栏不再卡在大文件夹上:打开删除护栏后,agent 的 rm -rf node_modules 会换成可以复活的下葬。上万项的文件夹在磁盘缓存还没热的时候,以前会报 retry: context deadline exceeded,要再试一次才行。现在下葬前在账本锁外把整个文件夹查完,锁里只做一次快速复查,第一次就能埋好;里面有 Git 仓库的照样不埋。

升级:Windows 用 scoop update obituary,或再运行一次安装脚本(默认装最新版,国内加 -Mirror cn);macOS 用 brew upgrade --cask obituary;macOS / Linux 也可以再运行一次 bash install.sh(国内加 --mirror cn)。1.3 的变化见 1.3.0 的发布说明。


Obituary 1.3.1

Very large folders now go into the graveyard on the first try.

  • obit bury and the delete guard no longer stall on large folders. With the delete guard on, an agent's rm -rf node_modules becomes a burial you can undo. A folder of tens of thousands of entries used to fail with retry: context deadline exceeded while the disk cache was cold, and only a second try worked. The whole folder is now searched before the ledger lock is taken and only rechecked quickly under it, so it is buried the first time; a folder holding a Git repository is still refused.

Upgrade on Windows with scoop update obituary, or run the install script again (it installs the latest release; add -Mirror cn in mainland China). On macOS, brew upgrade --cask obituary; on macOS and Linux, running bash install.sh again works too (--mirror cn in mainland China). What 1.3 changed is in the 1.3.0 release notes.

v1.3.0

Choose a tag to compare

@github-actions github-actions released this 14 Nov 19:25

讣告 1.3.0

什么进讣告,由 AI 和你自己决定;进来的东西到期自动埋,7 天内都能恢复。

  • 自动登记默认关闭:讣告不再自己往里收东西。进讣告的只有 agent 用 obit mark / obit mktemp / obit bury 登记的、你在资源管理器里右键放进来的,以及你批准过的文件夹策略管的。删除护栏、墓地提醒和收工整理照常工作。想让讣告自己登记,在小窗口「设置」或「待你决定」页打开(分级、全自动、全部都问);首页顶栏写着「自动登记:关」或「开」,点一下就到设置。
  • 依赖、构建产物和缓存永远不自动登记:node_modules、dist、__pycache__ 这类目录被 Git 忽略,不代表没用,删了要重装、重建。任何模式下都不再自动登记,也不进提议。
  • 右键「放进讣告」:在资源管理器里右键文件或文件夹(可以多选),选 1 天、7 天、30 天,或「现在埋掉(可恢复)」,做完弹一条通知。Windows 11 在「显示更多选项」里。obit doctor 会检查它装得对不对。macOS 和 Linux 先用命令:obit mark <路径> 7d、obit bury <路径>。
  • 大文件夹按时下葬:到期的文件夹下葬前要找一遍里面有没有 Git 仓库。现在先在后台找,最多 30 秒,找完才埋(一个一万多项的文件夹 0.6 秒找完),里面有仓库照样不埋。
  • 埋不掉的会说明原因:失败后隔一阵再试,间隔从 1 分钟起越来越长、最长一天;连续失败 12 次就停下等你。小窗口「待你决定」新增「没埋成的」,写明原因,可以「重试」或「不再跟踪」;命令行 obit list 里也写着,obit extend <编号> 1m 再试一次。
  • 在别处删掉的东西及时结案:被跟踪的文件在讣告之外被删掉了,下一次检查就把记录结掉,不用等到期。
  • 后台更轻:常驻进程只在账本或配置变化时醒来,一串连续变化合并成一次处理,自己写账本不再唤醒自己。在这台装着几百条记录的机器上实测:账本连续写入时(agent 干活时就是这样),后台占用从约 2.9 个 CPU 核降到 0.2 个,每次写入的开销从 2.9 秒 CPU 降到 0.15 秒;空闲时含一次 5 分钟例行检查,平均占用从 0.15 个核降到 0.03 个。
  • 容器提议:每个容器只出一条提议;Docker 没启动时,提议的「批准」不可用,卡片上直说原因。
  • 托盘:找不到小窗口程序时,点「打开讣告」会弹通知,说明怎么修。
  • 讣告自己的备份 30 天后清理:obit init 改配置前留的 .bak 和账本升级前的备份,30 天后下葬,期间都能复活。
  • 编辑留下的备份:内置规则新增 *.bak、*.orig、*.rej、*.old、*~ 等,寿命 7 天(LevelDB 的 LOG.old 不算),obit rules apply 或打开自动登记时生效。
  • 安装更快:安装脚本默认装最新版,不用写版本号;下载分四段同时进行,下完核对 SHA-256,服务器不支持分段时自动退回单线下载。国内镜像下载从 36.2 秒缩短到 29.0 秒。

升级:Windows 用 scoop update obituary,或再运行一次安装脚本(默认装最新版,国内加 -Mirror cn);macOS 用 brew upgrade --cask obituary;macOS / Linux 也可以再运行一次 bash install.sh(国内加 --mirror cn)。升级后讣告会把自动登记切到关闭一次,以前自动登记的依赖、构建产物和缓存一并撤回(东西留在原处,不再计时);之后你在设置里怎么改都算数。再执行一次 obit init -g(带上原来安装时的参数),agent 读到的说明和 Skill 会换成新版,右键菜单也换成新的「放进讣告」。


Obituary 1.3.0

The agent and you decide what goes into Obituary; whatever is in is buried when due and can be restored for 7 days.

  • Automatic registration is off by default. Obituary no longer takes things in by itself. What goes in is what an agent registers with obit mark / obit mktemp / obit bury, what you add from Explorer's context menu, and what folder policies you approved cover. The delete guard, graveyard notices and the end-of-session tidy-up keep working. To have Obituary register by itself, turn it on in the window's Settings or Decisions page (tiered, fully automatic, or ask about everything); the home page's top bar says "Auto registration: off" or "on" and opens Settings when clicked.
  • Dependencies, build output and caches are never registered automatically. Folders such as node_modules, dist and __pycache__ are ignored by Git, which does not make them useless: deleting them means reinstalling or rebuilding. No mode registers or proposes them any more.
  • "Add to Obituary" in the context menu. Right-click files or folders in Explorer (several at once is fine) and choose 1, 7 or 30 days, or "Bury now (recoverable)"; a notification reports the result. On Windows 11 it is under "Show more options". obit doctor checks that it is installed correctly. On macOS and Linux use the commands for now: obit mark <path> 7d, obit bury <path>.
  • Large folders are buried on time. Before an expired folder is buried, Obituary searches it for Git repositories. The search now runs in the background for up to 30 seconds and the folder is buried once it is done (a folder of more than ten thousand entries takes 0.6 seconds); a folder holding a repository is still never buried.
  • Burials that fail say why. A failed burial is tried again after a while, starting a minute apart and waiting longer each time, up to a day; after 12 failures in a row Obituary stops and waits for you. The window's Decisions page has a new "Burials that failed" list with the reason, Retry and Stop tracking; obit list shows it too, and obit extend <id> 1m tries again.
  • Files deleted elsewhere are closed promptly. When a tracked file is deleted outside Obituary, its record is closed at the next check instead of at expiry.
  • A lighter background process. The resident process wakes only when the ledger or configuration changes, merges a burst of changes into one pass, and no longer wakes itself with its own writes. Measured on a machine tracking a few hundred items: during a stream of ledger writes (what an agent at work produces) the background process went from about 2.9 CPU cores to 0.2, from 2.9 CPU seconds per write to 0.15; idle, including one five-minute check, from 0.15 cores on average to 0.03.
  • Container proposals. Each container gets one proposal at most; while Docker is not running, a container proposal cannot be approved and the card says why.
  • Tray. When the window's program is missing, "Open Obituary" shows a notification explaining how to fix it.
  • Obituary's own backups are cleaned up after 30 days. The .bak files obit init keeps before changing a configuration and the backups taken before a ledger upgrade are buried after 30 days, restorable until purged.
  • Backups left when editing. New built-in rules cover *.bak, *.orig, *.rej, *.old, *~ and similar, with a 7-day lifespan (LevelDB's LOG.old is left alone); they apply through obit rules apply or with automatic registration on.
  • Faster installs. The install scripts install the latest release without a version number, download in four parts at once, verify the SHA-256 afterwards, and fall back to a single download when the server does not support ranges. From the mainland China mirror the download went from 36.2 to 29.0 seconds.

Upgrade on Windows with scoop update obituary, or run the install script again (it installs the latest release; add -Mirror cn in mainland China). On macOS, brew upgrade --cask obituary; on macOS and Linux, running bash install.sh again works too (--mirror cn in mainland China). After the upgrade Obituary switches automatic registration off once and spares the dependencies, build output and caches it registered automatically before (they stay where they are, without a lifespan); whatever you set afterwards stands. Run obit init -g once more (with the options you installed with) so agents read the new instructions and Skill and the context menu becomes the new "Add to Obituary".

v1.2.1

Choose a tag to compare

@github-actions github-actions released this 14 Nov 14:58

讣告 1.2.1

从旧版升级时,obit init 不再误报 OBIT.md 不是讣告写的。

  • 升级后能直接刷新说明:1.2.0 改了给 agent 的 OBIT.md,从 1.1 及更早版本升级的用户执行 obit init -g 时会被告知「OBIT.md exists and was not written by Obituary」而停下。1.2.1 认得以前各版写的 OBIT.md,直接换成新说明;你自己改过的 OBIT.md 照旧不会被覆盖。

升级:Windows 用 scoop update obituary,或安装脚本加 -Version 1.2.1 再运行一次(国内加 -Mirror cn);macOS 用 brew upgrade --cask obituary;macOS / Linux 也可以 bash install.sh --version 1.2.1(国内加 --mirror cn)。升级后执行一次 obit init -g(带上原来安装时的参数),agent 读到的说明和 Skill 会换成 1.2 的新版。1.2 的新功能见 1.2.0 的发布说明。


Obituary 1.2.1

Upgrading from an earlier version, obit init no longer mistakes OBIT.md for a file Obituary did not write.

  • Instructions refresh after an upgrade: 1.2.0 changed the OBIT.md it gives agents, and on installs upgraded from 1.1 or earlier obit init -g stopped with "OBIT.md exists and was not written by Obituary". 1.2.1 recognises the OBIT.md earlier versions wrote and replaces it with the new instructions; an OBIT.md you edited yourself is still never overwritten.

Upgrade on Windows with scoop update obituary, or run the install script again with -Version 1.2.1 (add -Mirror cn in mainland China). On macOS, brew upgrade --cask obituary; on macOS and Linux, bash install.sh --version 1.2.1 works too. Run obit init -g once more afterwards (with the options you installed with) so agents read the 1.2 instructions and Skill. What 1.2 brings is in the 1.2.0 release notes.

v1.2.0

Choose a tag to compare

@github-actions github-actions released this 14 Nov 13:04

讣告 1.2.0

AI 自己留下的东西直接进讣告,不再事事等你点头;你原来就有的文件,照旧先问你。

  • 三档模式,默认「分级」:AI 这次会话自己新建的文件、会话留下的能重新生成的依赖和缓存(node_modules、dist 这类被 Git 忽略的目录)、会话里为项目起的 Docker 容器,直接带上寿命进讣告;会话开始前就在的文件只列成提议,等你批准。想完全交给 AI,切到「全自动」;想什么都先问你,切到「全部都问」。Git 跟踪的文件在任何模式下都不会被自动登记,下葬的东西照样七天内能复活。
  • 事后告知,随时撤回:没问你就登记的东西,AI 会在写完文件后或下一次会话开始时听到「登记了什么、寿命多久、怎么撤回」;小窗口「待你决定」页下方的「已自动处理」和 obit proposals 里也都列着。obit spare <编号>(或窗口里的「撤回」)让它不再计时、原样留在原处,obit extend <编号> <寿命>(或「续命」)留久一点,已经下葬的用 obit resurrect <编号> 放回。
  • 收工整理:Claude Code 和 Codex 的 AI 停下来时,如果它这次新建的文件里还有没归类的,讣告请它过一遍:调试脚本、日志、截图登记寿命或下葬,正式成果留下。每个会话最多问一次,没有就不打扰;其他 agent 改在下一次会话开始时提醒。不想要可以在「设置」里关掉「收工整理」。
  • 怎么切换:小窗口「待你决定」页最上面就能切三档,切到全自动前会先确认一次。命令行改 config.toml:[proposals] mode = "tiered"(分级)、"auto"(全自动)或 "ask"(全部都问);obit proposals 的最后一行会告诉你配置文件在哪。升级后,还在等你的提议会按当前模式重新分一次:能直接进的自动登记并告诉你,其余照旧等你。

升级:Windows 用 scoop update obituary,或安装脚本加 -Version 1.2.0 再运行一次(国内加 -Mirror cn);macOS 用 brew upgrade --cask obituary;macOS / Linux 也可以 bash install.sh --version 1.2.0(国内加 --mirror cn)。升级后执行一次 obit init -g(带上原来安装时的参数),agent 读到的说明和 Skill 会换成新版。


Obituary 1.2.0

What an agent leaves behind goes straight into Obituary instead of waiting for your approval; files that were already yours still ask first.

  • Three modes, Tiered by default: files an agent created in its session, the dependencies and caches it left that tools can rebuild (Git-ignored folders such as node_modules and dist), and Docker containers the session started for the project get a lifespan directly. Files that were there before the session only become a proposal for you to approve. To hand everything to the agent, switch to Fully automatic; to be asked about everything, switch to Ask about everything. Git-tracked files are never registered automatically in any mode, and burials stay restorable for seven days.
  • Told afterwards, undone any time: for everything registered without asking, the agent hears what went in, for how long and how to undo it, right after the write or at the next session start. Handled automatically on the window's Decisions page and obit proposals list it too. obit spare <id> (Undo in the window) stops the countdown and leaves it where it is, obit extend <id> <lifespan> (Keep longer) keeps it longer, and obit resurrect <id> brings back one already buried.
  • End-of-session tidy-up: when a Claude Code or Codex agent is about to stop and files it created this session are still unsorted, Obituary asks it to go through them: debug scripts, logs and screenshots get a lifespan or are buried, deliverables stay. At most once per session, and nothing is said when there is nothing to sort; other agents hear it at the next session start. Turn it off with End-of-session tidy-up in Settings.
  • Switching: the top of the Decisions page switches between the three modes, and asks once before going fully automatic. On the command line, set [proposals] mode in config.toml to "tiered", "auto" or "ask"; the last line of obit proposals says where the file is. After the upgrade, proposals still waiting are sorted again under the current mode: what may go in directly is registered and reported, the rest keeps waiting for you.

Upgrade on Windows with scoop update obituary, or run the install script again with -Version 1.2.0 (add -Mirror cn in mainland China). On macOS, brew upgrade --cask obituary; on macOS and Linux, bash install.sh --version 1.2.0 works too. Run obit init -g once more afterwards (with the options you installed with) so agents read the updated instructions and Skill.

讣告 Obituary 1.1.1

Choose a tag to compare

@github-actions github-actions released this 13 Nov 11:06

讣告 1.1.1

删除护栏拦得更全,obit purge 永久删除前先问你,配置写错会直接指出来。

  • 删除护栏拦下每一条字面删除:只要命令位置上出现 rm、rmdir、git clean 或 Remove-Item(含 del、rd 等别名),不论写在 &&、||、;、管道、$(…) 还是子 shell 里,都会拦下这一次执行,例如 rm -rf build && npm run build、rm -rf build 2>/dev/null、rm -rf build || true、git clean -fdx && npm ci。能给出等价命令的照旧给 obit rm …;给不出的也拦下,并说明 obit bury <路径> 和 obit git-clean 能做到可复活的删除。字符串、注释和 rm --help、git clean -n、Remove-Item -WhatIf 这类预览照常执行。
  • 火化前先确认:obit purge --all 和 obit purge <编号或路径> 会越过七天保留期永久删除,现在先列出要火化的东西再问你;在脚本或 agent 的终端里运行时必须加 --yes,agent 会先来问你。不带参数的 obit purge(只火化过了保留期的)和 --dry-run 不变。
  • 护栏更耐用:超长、嵌套极深或写错语法的命令不会再让护栏出错,照样检查。
  • 配置写错会指出来:config.toml 里拼错的键(比如把 retention_days 写成 retention)以前会被悄悄忽略、照用默认值;现在讣告会报出文件、行号和最接近的正确写法,obit doctor 也标为失败。改正之前后台不按这份配置清理,免得按错的设置下葬或火化。

升级:Windows 用 scoop update obituary,或安装脚本加 -Version 1.1.1 再运行一次(国内加 -Mirror cn);macOS 用 brew upgrade --cask obituary;macOS / Linux 也可以 bash install.sh --version 1.1.1(国内加 --mirror cn)。已开的护栏升级后直接生效,不用重新 obit init;升级后跑一次 obit doctor,配置里有拼错的键会在这里列出来。小窗口「设置 → 关于」里也会提示新版本。


Obituary 1.1.1

The delete guard catches more, obit purge asks before deleting for good, and config typos are pointed out.

  • The delete guard stops every literal deletion: whenever rm, rmdir, git clean or Remove-Item (and aliases such as del and rd) sits at a command position, whether after &&, || or ;, in a pipeline, inside $(…) or a subshell, that run is stopped. Examples: rm -rf build && npm run build, rm -rf build 2>/dev/null, rm -rf build || true, git clean -fdx && npm ci. Where an exact equivalent exists the guard still offers obit rm …; where none does, it still stops the command and explains that obit bury <path> and obit git-clean delete restorably. Strings, comments and previews such as rm --help, git clean -n and Remove-Item -WhatIf run as usual.
  • Purge asks first: obit purge --all and obit purge <id|path> skip the seven-day retention and delete for good, so they now list what will be purged and ask. Run from a script or an agent's shell they need --yes, so the agent asks you first. Plain obit purge (only burials past retention) and --dry-run are unchanged.
  • A sturdier guard: very long, deeply nested or malformed commands no longer trip up the guard; they are checked like any other.
  • Config typos are pointed out: a misspelled key in config.toml (say retention for retention_days) used to be ignored silently, leaving the default in place. Obituary now reports the file, line and the closest valid key, and obit doctor marks it as a failure. Until it is fixed, the background runner does not clean up under that config, so a wrong setting never decides what gets buried or purged.

Upgrade on Windows with scoop update obituary, or run the install script again with -Version 1.1.1 (add -Mirror cn in mainland China). On macOS, brew upgrade --cask obituary; on macOS and Linux, bash install.sh --version 1.1.1 works too. A guard you already turned on picks up the change with the upgrade; no need to run obit init again. Run obit doctor after upgrading: any misspelled config key shows up there. The window's Settings → About shows the new version too.

讣告 Obituary 1.1.0

Choose a tag to compare

@github-actions github-actions released this 13 Nov 04:17
40be59c

讣告 1.1.0

讣告来到 macOS 和 Linux。

  • macOS / Linux(x64 和 ARM64):命令行 obit 和后台程序 obitd。AI 留下的临时文件照样一出生就有寿命,到期进墓地,七天内 obit resurrect 原样放回。macOS 用 launchd、Linux 用 systemd 用户定时器检查到期文件。
  • 安装:macOS 可以 brew install --cask woodfishhhh/tap/obituary;macOS 和 Linux 都可以用安装脚本,核对 SHA-256 后装到 ~/.local/bin:
    curl -fsSL https://raw.githubusercontent.com/woodfishhhh/obituary/main/install.sh -o install.sh
    bash install.sh --version 1.1.0      # 国内加 --mirror cn
    装好后 obit init 接入你的 agent,obit doctor 体检。也可以把这句发给你的 AI:「读 https://obituary.woodfish.site/agent-install.md ,照里面的步骤帮我安装讣告并接入你自己。」
  • 下葬更稳:在 macOS / Linux 上,讣告用不覆盖的改名把文件移进墓地,移完再核对一遍是不是原来那个;不是就原样放回。删掉又在原处新建的同名文件,讣告也认得出是新的,不会把它当成旧文件下葬。
  • 删除护栏:在 macOS 和 Linux 的终端里同样拦下 agent 的 rm -rf,换成能复活的 obit rm。
  • 会话遗留的提议更准:只列出被 Git 忽略、可以重新生成的东西(依赖、构建产物、缓存目录),还没提交的代码不会出现在提议里;容器只提议和这个项目有关的。提示里直接写明建议批准、批准后会怎样(定寿命、到期下葬、随时能复活)。
  • 所有平台:墓地记录改成单独存放,墓地再大,agent 每次写文件时讣告记账也一样快。

升级:Windows 用 scoop update obituary,或安装脚本加 -Version 1.1.0 再运行一次(国内加 -Mirror cn);小窗口「设置 → 关于」里也会提示新版本。


Obituary 1.1.0

Obituary comes to macOS and Linux.

  • macOS / Linux (x64 and ARM64): the obit command and the obitd background runner. Files your AI agent leaves behind get a lifespan the moment they appear, go to the graveyard when it runs out, and come back unchanged with obit resurrect for seven days. Expiries are checked by launchd on macOS and a systemd user timer on Linux.
  • Install: on macOS, brew install --cask woodfishhhh/tap/obituary. On macOS and Linux, the install script verifies SHA-256 and installs into ~/.local/bin:
    curl -fsSL https://raw.githubusercontent.com/woodfishhhh/obituary/main/install.sh -o install.sh
    bash install.sh --version 1.1.0
    Then obit init connects your agents and obit doctor checks the setup. Or tell your AI: "Read https://obituary.woodfish.site/agent-install.md and follow it to install Obituary and connect it to yourself."
  • Careful burial: on macOS and Linux, Obituary moves a file into the graveyard with a rename that never overwrites, then checks it moved the right thing, and puts it straight back if not. A file deleted and recreated at the same path is recognised as new and is never buried in place of the old one.
  • Delete guard: catches an agent's rm -rf in macOS and Linux shells too, and offers the restorable obit rm instead.
  • Sharper session-leftover proposals: only Git-ignored, regenerable items (dependencies, build output, cache directories) are proposed, never code you have not committed yet; containers only when they belong to the project. The notice says the proposal is recommended and what approving does (a lifespan, burial when it runs out, restorable any time).
  • Every platform: the graveyard is now stored on its own, so recording an agent's writes stays fast however large the graveyard grows.

Upgrade on Windows with scoop update obituary, or run the install script again with -Version 1.1.0 (add -Mirror cn in mainland China). The window's Settings → About shows the new version too.

讣告 Obituary 1.0.1

Choose a tag to compare

@github-actions github-actions released this 11 Nov 16:38

讣告 1.0.1

安全更新,建议所有人升级。

  • 用 Go 1.26.11 重新构建,带上了标准库最新的安全修复,其中包括 Windows 上目录句柄遇到 junction 和符号链接时的两处边界修复。讣告靠这类句柄确保下葬、复活和写配置时不会被链接引到别处,升级后这层保护更扎实。
  • 依赖库更新到当前版本。

升级:scoop update obituary;安装脚本换成 -Version 1.0.1 再运行一次(国内加 -Mirror cn)。小窗口「设置 → 关于」里也会提示新版本。


Obituary 1.0.1

A security update; everyone should upgrade.

  • Rebuilt with Go 1.26.11, which brings the latest standard library security fixes, including two boundary fixes for Windows directory handles that meet junctions and symbolic links. Obituary relies on those handles so that burying, resurrecting and writing settings can never be redirected elsewhere by a link; this release makes that protection firmer.
  • Dependencies updated to their current versions.

Upgrade with scoop update obituary, or run the install script again with -Version 1.0.1 (add -Mirror cn in mainland China). The window's Settings → About shows the new version too.

讣告 Obituary 1.0.0

Choose a tag to compare

@github-actions github-actions released this 11 Nov 11:50

讣告 1.0.0

AI 写下的垃圾到期自己走,AI 删掉的东西七天内都能找回。

讣告给 AI 写下的文件一个寿命。到期先下葬进墓地,七天内都能原样复活,过了保留期才真正删除。

这一版有什么

  • 自动登记 agent 的产物:调试脚本、日志、截图、test-results/ 一生成就带上寿命。只登记 Git 没跟踪的东西,每个项目第一次先问你。
  • 删除护栏:agent 的 rm -rf、git clean、Remove-Item 会被拦下,换成等价的 obit 命令,东西进墓地而不是消失。
  • 先下葬,再火化:obit resurrect 把东西原样放回原处,绝不覆盖已有文件。
  • 接入 30 家 agent:Claude Code、Codex、Cursor、GitHub Copilot、Gemini CLI、OpenCode 等,obit init 一条命令接好,同时把讣告的 Agent Skill 装进各家 agent 读 skill 的目录。
  • 托盘和小窗口:即将下葬、即将火化、待你决定、设置、日志,不用命令行也能复活和批准。开始菜单、桌面、托盘都能打开;右键文件就能设寿命。
  • Docker 容器和文件夹策略:agent 起的容器、下载目录里的文件,到期先停用或下葬,批准后才处理。
  • 国内镜像:https://obituary.woodfish.site/ 在国内直接打开,安装脚本加 -Mirror cn 从国内下载。
  • 每天检查一次新版本:只读公开的发布信息(GitHub 或国内镜像),可以在设置里关掉。

安装

把这句话发给你的 agent:

读 https://obituary.woodfish.site/agent-install.md ,照里面的步骤帮我安装讣告并接入你自己。

或者自己装:scoop bucket add obituary https://github.com/woodfishhhh/scoop-bucket 再 scoop install obituary,或者用 PowerShell 安装脚本,见安装文档。winget 正在审核,通过后 winget install woodfishhhh.Obituary 就能装。

支持 Windows 10 和 11(x64、ARM64)。想在 macOS、Linux 上用,在官网留下邮箱,新平台发布时通知你。安装脚本会逐个核对压缩包的 SHA-256,全部列在 checksums.txt 里。


Obituary 1.0.0

Files your AI leaves behind leave on their own when they expire; files your AI deletes can be brought back for seven days.

Obituary gives the files AI writes a lifespan. When it runs out they are buried in a graveyard, restorable as they were for seven days, and only then really deleted.

What's in it

  • Agent output registered automatically: debug scripts, logs, screenshots and test-results/ get a lifespan the moment they appear. Only files Git doesn't track, and every project asks you first.
  • Delete guard: an agent's rm -rf, git clean or Remove-Item is stopped and replaced by the equivalent obit command, so things go to the graveyard instead of disappearing.
  • Bury first, purge later: obit resurrect puts things back exactly where they were and never overwrites anything.
  • 30 agents: Claude Code, Codex, Cursor, GitHub Copilot, Gemini CLI, OpenCode and more, connected with one obit init, which also installs Obituary's Agent Skill wherever each agent reads skills.
  • Tray and a small window: Upcoming, Graveyard, Decisions, Settings and Logs; resurrect and approve without the command line. Open it from the Start menu, the desktop or the tray, and give a file a lifespan from its right-click menu.
  • Docker containers and folder policies: containers an agent started and files in Downloads are stopped or buried when they expire, after you approve.
  • A mirror in mainland China: https://obituary.woodfish.site/ opens directly there, and the install script downloads from it with -Mirror cn.
  • A daily update check: reads public release information only (GitHub or the mirror), and can be turned off in Settings.

Install

Send this to your agent:

Read https://obituary.woodfish.site/agent-install.md and follow it to install Obituary and connect it to yourself.

Or install it yourself: scoop bucket add obituary https://github.com/woodfishhhh/scoop-bucket, then scoop install obituary, or the PowerShell script; see the install guide. winget is in review; once approved, winget install woodfishhhh.Obituary works too.

Runs on Windows 10 and 11 (x64, ARM64). Want it on macOS or Linux? Leave your email on the website and hear as soon as they ship. The install script checks every archive against its SHA-256 in checksums.txt.