Repository navigation
Releases
Tab5 Web Display 1.6.0
Tab5 Web Display 1.6.0: a holiday theme for the built-in apps, and shake the Tab5 to make it snow. See CHANGELOG.md for the full list and the README for how to use it.
Changes
- Holiday theme for the built-in apps, on by itself from November 15 to January 6: a winter evening behind the cards (a blue twilight sky with stars, a moon and an aurora, snowy hills and pines), snow lying on the cards, a gold accent, and today in the clock's calendar as a red bauble.
--set theme=holidayturns it on at any time,--set theme=plainnever. - Shake the Tab5 and it snows for 20 s: soft flakes of many sizes and slowly turning six-armed crystals, while the snow on the cards grows and then melts. The firmware reads the accelerometer and tells the server, and your own pages can listen for the
tab5shakeevent too. - Dashboard: the Hacker News headlines open the story in a new tab, and their score opens the discussion. Swipe up from the bottom edge to close the tab.
- Tab hints: page titles the hint can't draw (Chinese, emoji) show the page's address instead.
- Fix (firmware): the mouse pointer's SIMD blend now uses a plain loop. With the chip's hardware loop, its last 8 pixels came out wrong about once in 100000 draws.
Firmware and server 1.6 work with older versions of each other. Shaking for snow needs both.
Firmware (one image, written at address 0x0, e.g. with M5Burner or esptool --chip esp32p4 write-flash 0x0 tab5-web-display-v1.6.0-prev3.bin). Writing the image clears the saved settings: choose your WiFi network again on the Tab5's screen. The Tab5 also gets a new ID, so pair it again for remote mode.
tab5-web-display-v1.6.0-prev3.bin: for the Tab5 (its ESP32-P4 is revision v1.x: esptool prints "revision v1.x"). Tested.
Licenses and source (the firmware contains third-party software, some of it under the LGPL):
tab5-web-display-v1.6.0-NOTICES.txt: the notices and license texts of everything in the firmware.tab5-web-display-v1.6.0-source.tar.gz: the corresponding source (this repository at v1.6.0 and the Arduino core as built);SOURCE.txtinside explains how to rebuild.SHA256SUMS
Server: download the source below (or git clone), then pip install -r requirements.txt and python server/server.py.
Tab5 Web Display 1.5.0
Tab5 Web Display 1.5.0: remote mode, so the Tab5 can be used away from home, with each Tab5 approved once on the PC. See CHANGELOG.md for the full list and the README for how to use it.
Changes
- Remote mode: the Tab5 connects out to the PC through a tunnel or reverse proxy you set up (a Cloudflare Tunnel, ngrok, Tailscale Funnel, nginx, ...), so it works on any WiFi that reaches it.
- On the PC:
server.py --listen 8790, with the tunnel pointed athttp://127.0.0.1:8790. - On the Tab5: turn on Remote next to the address in the settings and enter the tunnel's
https://address (tap the address later to change it), or on the serial consoletunnel <https address>/tunnel on/tunnel off. It is kept across restarts. - Pairing: each Tab5 has a random ID and shows a six-digit code. The server asks on its terminal before taking a Tab5 it doesn't know;
server.py --pair <code>allows one without a terminal, and a Tab5 plugged in by USB when the server starts is paired at once.--devicesand--unpairmanage the list. - While remote mode is on, the Tab5 takes no connections from the local network.
- Sound goes along in the same connection. Through Cloudflare's network: a tap's response in 132 ms (124 ms on the local network), a heavy video with sound at 24-27 fps.
- On the PC:
server.py -vshows each touch, key or click's way to the screen, stage by stage.- The LICENSE file is the plain MIT text, so GitHub recognises it.
Older firmware and servers keep working with these on the local network; remote mode needs firmware and server 1.5.
Firmware (one image, written at address 0x0, e.g. with M5Burner or esptool --chip esp32p4 write-flash 0x0 tab5-web-display-v1.5.0-prev3.bin). Writing the image clears the saved settings: choose your WiFi network again on the Tab5's screen. The Tab5 also gets a new ID, so pair it again for remote mode.
tab5-web-display-v1.5.0-prev3.bin: for the Tab5 (its ESP32-P4 is revision v1.x: esptool prints "revision v1.x"). Tested.
Licenses and source (the firmware contains third-party software, some of it under the LGPL):
tab5-web-display-v1.5.0-NOTICES.txt: the notices and license texts of everything in the firmware.tab5-web-display-v1.5.0-source.tar.gz: the corresponding source (this repository at v1.5.0 and the Arduino core as built);SOURCE.txtinside explains how to rebuild.SHA256SUMS
Server: download the source below (or git clone), then pip install -r requirements.txt and python server/server.py.