Skip to content

Releases

v2.2.1: Unified Debug Center & Complete Issue Resolutions

Choose a tag to compare

@yunusemreyl yunusemreyl released this 08 Nov 18:13

Release v2.2.1

πŸš€ New Features & Enhancements

  • Unified Debug Center: Completely revamped the debugging experience into a dedicated Debug Center page accessible directly from the main sidebar. Features include:
    • Motherboard DMI verification badge, kernel release, and loaded driver status.
    • Conflict detection for thermald, power-profiles-daemon, tlp, and throttled.
    • Real-time CPU/GPU telemetry, fan speeds, power draw, and discovered hwmon/sysfs paths.
    • Interactive test bench: Fan 100% / Auto / Dust Cleaning tests, 4-zone & lightbar RGB cycle, and Per-Key HID test.
    • Real-time Hotkey/Macro event listener for OMEN key, Calculator, and P1..P6 keys.
    • 256-byte Embedded Controller (EC) hex memory viewer.
    • One-click Diagnostic Report, Hardware Triage Bundle, RGB Issue Report, and GitHub issue generator.
  • Hardware Effects (#322): Support for MCU hardware effects on Darfon keyboards (0d62:54bf).
  • Programmable Keys (#342): Full support for OMEN 17t-ck100 (8A17) P1..P6 macro keys with custom scancode mappings.
  • Atomic 4-Zone Sysfs Control (#343): Added all_zones sysfs attribute in hp-omen-extra to batch update all 4 zones in a single WMI call, eliminating zone latency and desync.
  • Independent Lightbar Controls: Dedicated Lightbar D-Bus interface and native sysfs/LED class integration.

πŸ› Bug Fixes & Stability

  • dGPU Telemetry (#344, #341 A.1): Always sample NVML when dGPU is awake in D0, fixing GPU temp = 0 on 8BD4 and 8D41.
  • Keyboard Off Button (#344, #341 B.2): Properly power down RGB when pressing Off button, and restore power on color selection.
  • CPU 100% on Resume (#345): Completely rewritten evdev input monitor with raw non-blocking async libc::input_event reading, eliminating evdev SYN_DROPPED livelocks, and parked while inactive.
  • Fan Stalling at 0 RPM (#346): Enforced minimum active spinning duty (>= 35% / duty 89) to prevent fan motor stall under custom fan curves on 8EEF.
  • 0 RPM Fan Stop (#347): Seamless BIOS auto handoff when temperature is below 48Β°C.
  • RAPL Baseline Retention (#341 A.2): Persisted factory RAPL baseline to prevent re-capturing custom power overrides.
  • Daemon Status Subscriptions (#341 A.3): Cached connection status and replayed to new UI subscribers.
  • Thermal Protection Smoothing (#341 A.4): Debounced protection trigger to require sustained temperature spikes before max fan activation.
  • Darfon Dynamic Lighting Lockout (#341 B.3, #349): Routed Darfon vendor output to Interface 3 and cleared Windows Dynamic Lighting lockout via Interface 4 Feature Report 6.
  • NixOS & openSUSE Packaging (#348, #349): Fixed Linux 7.x module build in flake.nix, added missing org.hp.omen.service D-Bus system activation file, and fixed setup.sh openSUSE build & install routes.

πŸ’» Board Support & Verifications

  • Added OMEN 16-c0xxx AMD (88FA, #350)
  • Added Victus 15-fa1xxx (8E71, #351)
  • Verified Victus 16-r0xxx Intel (8A44, #352)
  • Added OMEN MAX 16-ak0xxx AMD (8D88, #353) with Per-Key RGB & Lightbar
  • Added OMEN 16-b0xxx Intel (8901, #354) with 4-Zone RGB

OMEN Space v2.2.0 πŸš€

Choose a tag to compare

@yunusemreyl yunusemreyl released this 27 Oct 21:09

πŸš€ What's New in OMEN Space v2.2.0

πŸ”„ Overhauled Update Center & Self-Updater

  • Commit & Version Awareness (build.rs & /etc/omen-space/build_info.json): Displays both the semantic version (v2.2.0) and exact build commit hash (#sha), checking both GitHub Releases and main branch commits so hotfixes on main are always detected immediately.
  • Inline Step-by-Step Update Progress: Replaced the legacy modal window with an integrated Libadwaita progress card featuring real-time step indicators (0% β†’ 100%), stripped-ANSI live terminal log streaming, Copy Log, Reinstall / Repair, and one-click Restart Application.
  • Safe pkexec & systemd-run Execution: Fixed PKEXEC_UID user resolution so the user's ~/.cargo/bin Rust toolchain and home directory permissions are preserved; prevented setup.sh from killing omen-gui mid-update when launched from the UI; isolated CLI/daemon self-updates inside transient systemd-run units.
  • Live DKMS & fwupd Status: Added live hp-wmi / hp-omen-extra module verification and fixed fwupdmgr refresh + get-updates reporting.

πŸ’» Expanded Motherboard & Kernel Driver Support

  • ACPI WMBA Buffer Limit Fix (driver/hp-wmi.c): Increased minimum WMI input buffer allocation from 144 (0x90) to 512 (0x200) bytes, resolving AE_AML_BUFFER_LIMIT aborts on newer HyperX OMEN boards (#335).
  • Newly Added & Verified Boards:
    • 8EEC β€” HyperX OMEN Gaming Laptop 15-gb0xxx (thermal profile quirk, reversed 4-zone RGB mapping, and WMBA buffer fix β€” #335)
    • 8EDD β€” HyperX OMEN Gaming Laptop 16-ap0xxx (#339)
    • 8EEF β€” OMEN HyperX 16 Gaming Laptop (#324)
    • 8C2D β€” HP Victus 15-fa1xxx / 16-s1xxx (#340)
    • 8D26 β€” HP OMEN 16-xd0xxx (#337)
    • 8A17 β€” HP OMEN 17t-ck100 / Victus 15-fa0xxx (#334)
    • 8BCD β€” HP OMEN 16-wf0xxx (#336, #338)
    • 8A43 β€” HP OMEN 16-n0xxx / 16-k0xxx (#333)
    • 88D1 β€” HP OMEN 15-en1xxx / 16.1 (#330)
    • 8902 β€” HP OMEN 16-c0xxx (#326)

🌑️ Thermal, Power & Notification Improvements

  • Continuous 3s >= 90Β°C Thermal Alert Debounce (#332, #338): Eliminates false-positive overheating notifications caused by brief single-core boost spikes while keeping 85Β°C recovery hysteresis separate.
  • In-Place Notification Replacement (#338): Uses notify-send -p / -r <id> in user sessions and normal urgency for recovery banners so notifications never stack in GNOME Shell 50.6 history.
  • Boot RAPL Baseline & UV_LOCK Detection (#317, #338): Persists initial boot PL1/PL2 defaults in /run/omen-space/rapl_baseline.json, locks Core Ultra HX voltage sliders appropriately, and surfaces the MSR Protected (UV_LOCK) banner when firmware blocks MSR 0x150 writes.

🎨 UI, RGB Studio & Quick Overlay Fixes

  • Custom Fan Curve Presets (#315): Fixed the 1.5s background sync timer snapping active custom fan presets back to the generic Custom button and added immediate curve graph redrawing when selecting or editing presets.
  • RGB Studio Enhancements (#334, #336): Added a Reset Default button and fixed GTK theme overrides on color picker preset swatches.
  • Quick HUD Overlay Sync (#320): Added live periodic synchronization while the Shift+F2 Quick Access Panel is open.
  • Monitoring & Storage Accuracy (#338): Excluded <= 0Β°C sleeping dGPU readings from the 5-sample moving average and fixed unmounted partition size fallbacks.

⚑ Quick Install / Update

curl -sSL https://raw.githubusercontent.com/yunusemreyl/omen-space/main/install.sh | sudo bash -s -- --stable

OMEN Space v2.1.7 πŸš€

Choose a tag to compare

@yunusemreyl yunusemreyl released this 17 Oct 14:35

πŸš€ What's New in OMEN Space v2.1.7

πŸ› Quick HUD Overlay (omen-overlay) & Localization Fixes

  • Turkish Selected Performance Mode Fix: Fixed an issue in OMEN Quick Settings (omen-overlay / OMEN HIZLI AYARLAR) where the active performance profile button (Sessiz, VarsayΔ±lan, Performans) was not highlighted when using the Turkish (or Spanish) UI language because translated button labels were previously compared against canonical English D-Bus profile identifiers.
  • Language-Independent Profile Normalization: Standardized power profile (power-saver, balanced, performance) and fan mode (auto, max, custom) keys across omen-overlay button clicks, keyboard shortcuts (1-3, Q/W/E), and D-Bus state synchronization.
  • Spanish Localization in Quick Overlay: Added full Spanish (es) translation coverage to omen-overlay matching omen-gui.

πŸ“š Documentation & Packaging

  • Updated README.md, README.es.md, PKGBUILD, install.sh, flake.nix, driver/dkms.conf, and all workspace crates to v2.1.7.

OMEN Space v2.1.6 πŸš€

Choose a tag to compare

@yunusemreyl yunusemreyl released this 17 Oct 14:20

πŸš€ OMEN Space v2.1.6 β€” Hardware Support, Fan Control, WMI & RGB Improvements

πŸ”§ Kernel Driver (driver/hp-wmi.c)

  • Automatic & Permanent WMI GUID Fallback (#264, #282, #302, #304): Automatically falls back from HPWMI_OMEN_HPC_GUID (\_SB.WMID.WMBA) to HPWMI_BIOS_GUID (\_SB.WMID.WMAA) on the first ACPI method abort (AE_AML_BUFFER_LIMIT) and expands broken_omen_hpc_guid_boards (8A4C, 8A50, 8B3B, 8BB2, 8BC8, 8C76, 8C77, 8C78, 8C9A, 8D3F, 8D40, 8D41, 8D42, 8D87, 8D88, 8E0F).
  • Restored Manual Fan Curves & NVIDIA Dynamic Boost Guard (#270, #302, #305): Switched modern OMEN/Victus boards (8D2F, 8D3F, 8D40, 8D41, 8D42, 8D87, 8D88, 8E0F, 8A50, 8DD0) to omen_v1_unknown_ec_thermal_params, re-enabling pwm1 / fan*_target manual fan control while preventing cold-boot fan writes from disabling NVIDIA Dynamic Boost (fixing 80W/90W GPU TGP caps).
  • 120-Second BIOS Fan Mode Power Drop Fix (#302): Maintains the 90-second keep-alive handler in PWM_MODE_AUTO on Victus-S / modern OMEN boards when Performance mode is active or after fan-mode transitions so the 120s EC timer never expires and throttles CPU PL1/PL2 to 40W.
  • Deduplicated Board Tables (#297): Removed duplicate 8786 / 878A entries from omen_thermal_profile_boards[].

πŸ–₯️ Daemon, GUI & Installer

  • New & Verified Boards (#269, #275, #284, #289, #290, #291, #292, #293, #297, #299, #303, #304, #305):
    • Added full model entries for 8A3D, 8A50, 8BBE, 8BD5, 8C99, 8C9C, 8C9A, 8BB2, 8BC8, 8B3B, 8C78.
    • Verified 8786, 8A4C, 8D40, and enabled WMI fan control & curves on 8D2F.
    • Synced omen-gui board verification directly with boards.json at compile time.
  • Built-in Fan-Stall / Overheat Detection (#301): Detects when CPU/GPU temperature reaches >= 75Β°C while all discovered fans report 0 RPM for 5 consecutive seconds, triggering an emergency Max Fan recovery and a critical desktop notification.
  • Darfon Composite USB HID Per-Key RGB (#268): Selects vendor-defined HID interfaces (0xFF00..0xFFFF) on composite keyboards (0d62:54bf) and reports driver_active = true when USB HID per-key RGB is active.
  • Power Profile & System Monitor Sync (#283, #293, #297): Prioritizes kernel platform_profile / thermal_profile sysfs readback over placeholder PPD states, prevents UI bounce back to Balanced, and live-refreshes the System Modes card on the System Monitor tab.
  • High-TDP CPU PL1/PL2 & Uninstaller Fixes (#268, #302): Expanded PL1/PL2 slider ranges (25–150 W / 45–200 W), scaled defaults (80 W / 140 W) for HX / Ryzen 9 / Core Ultra / i9 CPUs, improved GUI updater setup.sh discovery, and ensured setup.sh uninstall removes all installed hp-omen-extra DKMS versions.

OMEN Space v2.1.3 πŸš€

Choose a tag to compare

@yunusemreyl yunusemreyl released this 25 Sep 22:22

Version 2.1.3 is here with major stability improvements, critical battery-drain fixes, and a brand-new Diagnostics (Triage) interface!

✨ New Features & GUI Enhancements

Hardware Diagnostics (Triage) Tool: Added a new "Troubleshoot" section directly within the Settings page. Users can now seamlessly export WMI, SSDT, and DSDT diagnostics tables to help automate GitHub issue creation with a standardized template!
Polished UI & i18n Localization: The Update Center and Settings UI have been redesigned to feel more premium and modern with properly aligned containers and icons. All new elements, including the issue wizard, are fully tied to our dynamic i18n translation system.

πŸ”‹ Critical Battery & Performance Fixes

NVIDIA dGPU Battery Drain Resolved (#249): Fixed a massive battery drain issue when "Eco Mode" was enabled. omen-space-daemon was previously forcing the NVIDIA GPU to wake up from D3cold sleep state every second due to NVML polling. Now, the sysmon module properly checks the runtime_status via sysfs before touching NVML, allowing the GPU to sleep deeply and restoring your lost battery life!
Eco Mode UI Bouncing (#249): Fixed a visual bug where the "Eco" performance mode would snap back to "Balanced" in the GUI on laptops whose BIOS does not natively expose a quiet profile. The software limits (PL1/PL2, GPU TGP) were always applying, but the UI is now fully synced with your intentional software configuration.

πŸ› οΈ Hardware Quirks & Board Verification

Victus 15 Fan Max Speed Bug (#246): Fixed an issue for Board 8A4F (Victus 15-fa0000/fa03dx) where fans would get stuck at 100% RPM even during sleep mode. WMI fan control and curves are now explicitly disabled for this specific board to prevent BIOS conflicts, allowing the native BIOS controller to handle fan speeds safely.
Board Verification (#245): Officially marked Board 8E5D (HP Victus 15 2024) as fully verified and supported in our configuration registry.

🧹 Codebase Cleanup

Purged deprecated sysmon.rs thermal alert remnants and cleaned up dead code warnings in the Daemon RPC Client to ensure a clean build.
Removed outdated python script patches, scratch directories, and leftover workspace files.
Closed Issues: #245, #246, #249

OMEN Space v2.1 - Fan Control Fixes & Extended Hardware Support

Choose a tag to compare

@yunusemreyl yunusemreyl released this 20 Sep 20:44

πŸ“ What's New in this Release

This update primarily focuses on crucial stability improvements for hardware fan control, expanded support for 2025 OMEN models, and compilation fixes for older Linux distributions.

πŸ› Bug Fixes & Stability Improvements

  • Hardware Fan Control (OMEN 16 8A42 & 8A43): Fixed a critical ACPI bug (AE_AML_BUFFER_LIMIT) where fans were incorrectly reporting 0 RPM. These specific boards have been migrated to the no-EC WMI profile fallback path to bypass the firmware limitation, restoring full manual fan control and accurate telemetry. (#219)
  • Compilation Compatibility: Downgraded Cargo.lock to version = 3. This resolves the -Znext-lockfile-bump build errors, allowing users on stable distributions with older Rust toolchains (like Ubuntu 24.04 / Linux Mint 22) to successfully compile and install OMENSpace. (#222)

πŸ’» New Hardware Support & Verifications

Expanded out-of-the-box telemetry and capability support for the latest 2025 OMEN 16 variants:

  • Added Support for Board 8E5C - OMEN 16 2025 (AMD) (#225)
  • Added Support for Board 8D3F - OMEN 16 2025 (Intel) (#226)

πŸ› οΈ Installation & Updating

To install or update to this latest release, simply run the installation script:

git clone https://github.com/yunusemreyl/omen-space.git
cd omen-space
sudo ./setup.sh install

Omen Space v2.0.9

Choose a tag to compare

@yunusemreyl yunusemreyl released this 20 Sep 08:05

This release focuses on fixing a critical issue introduced in v2.0.6 regarding kernel module loading that completely broke fan control and monitoring for some users.

πŸ› Bug Fixes

Fan Control & 0 RPM Issue Fixed: Resolved a critical bug where omen-space-daemon failed to communicate with fans, causing the UI to show 0 RPM and the fans to not ramp up even when CPU/GPU temperatures reached 90Β°C during gaming.
Kernel Module Autoloading Fixed: Removed the faulty hp_wmi blacklist logic in /etc/modprobe.d/ that was preventing systemd-modules-load from automatically loading the custom DKMS driver on boot. depmod naturally prioritizes the DKMS module located in updates/, so the aggressive blacklisting was both unnecessary and harmful to the daemon's startup cycle.

πŸ› οΈ Under the Hood

Setup Script Cleanup: Running sudo ./setup.sh install will now automatically clean up and remove the broken modprobe blacklist file (/etc/modprobe.d/omen-space-hpwmi-override.conf) left over from previous v2.0.6/v2.0.7 installations.

πŸš€ OMEN Space v2.0.8 (Critical Hotfix Release)

Choose a tag to compare

@yunusemreyl yunusemreyl released this 19 Sep 13:42

This is a critical hotfix release addressing multiple installation and build failures reported by the community over the past week.

If you were experiencing Permission denied, Exactly one linux hidapi backend must be selected, or lock file version 4 requires -Znext-lockfile-bump errors during installation, this update is for you!

πŸ› οΈ What's Fixed?

  • hidapi Compiler & Linker Panics Resolved (#220, #221): Fixed the backend collision during cargo build. The daemon now correctly and exclusively links to the system's dynamic libhidapi-hidraw.so, eliminating conflicting backend selections and rust-lld undefined symbol errors.
  • Lockfile Version Mismatch (#222): Removed hardcoded Cargo.lock files from version control and dropped strict workspace rust-version constraints. The setup will now dynamically generate a lockfile compatible with your specific Linux distribution's cargo version (fully supports older Rust toolchains like 1.75 on Ubuntu 22.04/Mint 21).
  • Permission denied (os error 13) during setup (#221): Fixed a permission bug where sudo ./setup.sh install would clone the repository as root but attempt to compile as an unprivileged user. The script now correctly manages ownership before compiling.
  • Intelligent Auto-Installer Improvements:
    • Auto-install Rust/Cargo: If Cargo is missing from your system, the online installer (install.sh/setup.sh) now automatically installs Rust without throwing errors and aborting.
    • Smart Localization: The installer now dynamically detects your system language ($LANG) and displays the menu entirely in Turkish or English, removing cluttered side-by-side bilingual texts.
  • Code Quality Improvements: Resolved dozens of clippy lints, fixing logical flow errors in sysmon.rs and preventing potential division-by-zero crashes in platform.rs.

βš™οΈ How to Update?

You can update easily using the standard one-liner command:

curl -sSL https://raw.githubusercontent.com/yunusemreyl/omen-space/main/install.sh | sudo bash

v2.0.7

Choose a tag to compare

@yunusemreyl yunusemreyl released this 19 Sep 10:06

cargo.lock updated for installation bug.

v2.0.6 - Critical Stability & Installation Hotfixes

Choose a tag to compare

@yunusemreyl yunusemreyl released this 19 Sep 08:16

This release addresses several critical stability issues, EC (Embedded Controller) lockups, and installation failures reported on recent kernel updates and newer hardware (such as Victus 15 8DD0).

πŸ› Bug Fixes & Stability Improvements

  • Resolved ACPI Error Floods & EC Lockups: Fixed a major issue where AE_AML_BUFFER_LIMIT errors would flood dmesg during daemon telemetry polling on specific boards (8DD0, 8C75, 8BAC, 878A, 8BCD). These boards are now blacklisted from using the broken HPWMI_OMEN_HPC_GUID in the kernel driver, preventing RGB failures and system instability. (Fixes #220)
  • WMI Buffer Size Correction: Enforced a strict 128-byte minimum buffer allocation in hp-omen-extra.c to prevent WMI query rejections and ACPI exceptions on newer BIOS versions.
  • Fixed Daemon Crash on Startup: Resolved an issue where omen-space-daemon would crash with a SIGABRT right after installation. The installation scripts now properly pull hidapi shared libraries across all supported distributions (Arch, Ubuntu/Debian, Fedora, openSUSE). (Fixes #219)
  • Fixed Rust Linker Errors: Transitioned the hidapi crate to use the linux-shared-hidraw feature in Cargo.toml. This resolves the rust-lld: undefined symbol: hid_init errors encountered when compiling from source. (Fixes #221)

πŸ“¦ Installation

If you are updating from a previous version, simply pull the latest changes and run the setup script:

sudo ./setup.sh update