Repository navigation
Releases
Improved Pico UF2 — ipfix3 payload, JIS + per-line IME build (2026-11-17)
Improved Pico UF2 — ipfix3 payload, JIS + per-line IME build
Prebuilt PicoSwitch UF2 firmware from yyoossk/CivSwitch, the fork of Gezine/CivSwitch. The UF2 types the CivSwitch loader into Civilization VII on a Switch 2 (firmware 23.0.1, game v1.0.0) through the in-game chat. Two things differ from a stock upstream build:
What's improved
1. ipfix3 payload (core.js)
The loader the UF2 types is the ipfix3 build instead of the stock core.js:
- IP detection retries up to 8 times and then falls back to listening on
0.0.0.0with a log line (IP detection failed - listening anyway), instead of waiting forever when the console's IP cannot be read. - The payload-accept loop logs sparingly, resets the network stack after repeated accept failures, and gives up cleanly instead of spinning.
2. Hardware-verified build configuration
- Japanese consoles: JIS keyboard layout with per-line IME toggling (
CIV7_IME_START=grave-each-line) — the combination verified on a real Japanese console. Upstream'sbuild_all.shcannot select the IME behaviour. - US layout: no IME handling, as before.
- The fork adds
PicoSwitch/build-uf2.shso anyone can rebuild with--board,--layout,--ime, and--payloadoptions (defaults are the verified JIS + IME configuration).
Files (in the attached zip)
File | For -- | -- civ7-pico2-jis-ime.uf2 | Pico 2, Japanese console civ7-pico1-jis-ime.uf2 | Pico 1, Japanese console civ7-pico2-us.uf2 | Pico 2, US-layout console civ7-pico1-us.uf2 | Pico 1, US-layout consolekaiHEN Installer に同梱され、実機で使われている UF2 と同じビルドです。
書き込み方
BOOTSEL を押しながら Pico を接続し、表示された USB ドライブに合う .uf2 をコピーしてください。シヴィライゼーション7 でマルチプレイヤーのワイヤレスロビーのチャットを開いて Pico を挿すと打ち込みが始まります (約24分)。画面に Awaiting payload at <本体IP>:9026 が出ればローダー起動完了です。
改良版 Pico UF2 — ipfix3 ペイロード + JIS・IME 毎行切替ビルド
Gezine/CivSwitch のフォーク yyoossk/CivSwitch でビルドした PicoSwitch UF2 です。Switch 2 (FW 23.0.1、シヴィライゼーション7 v1.0.0) のゲーム内チャットに CivSwitch ローダーを打ち込みます。標準の upstream ビルドとの違いは2点です。
改良点
- ペイロードが ipfix3 (core.js)
UF2 が打ち込むローダーを、標準の core.js から ipfix3 に差し替えました。
IP 検出は最大8回まで再試行し、読めない場合はログを出して 0.0.0.0 で待ち受けるため、IP が読めずに永久に止まることがありません (IP detection failed - listening anyway)
ペイロード受付ループはログを抑え、受付失敗が続くとネットワークをリセットし、回転し続けずにきれいに打ち切ります - 実機検証済みのビルド構成
国内版本体向け: JIS 配列 + IME 毎行切替 (CIV7_IME_START=grave-each-line)。日本の本体で実機検証済みの組み合わせで、upstream の build_all.sh では IME の挙動を選べません
US 配列: IME 切替なし (従来通り)
フォークには PicoSwitch/build-uf2.sh を追加し、--board / --layout / --ime / --payload を指定して再ビルドできます (既定は検証済みの JIS+IME 構成)
添付ファイル
ファイル
用途
civ7-pico2-jis-ime.uf2
Pico 2、日本版本体
civ7-pico1-jis-ime.uf2
Pico 1、日本版本体
civ7-pico2-us.uf2
Pico 2、US 配列の本体
civ7-pico1-us.uf2
Pico 1、US 配列の本体
kaiHEN Installer に同梱され、実機で使われている UF2 と同じビルドです。
書き込み方
BOOTSEL を押しながら Pico を接続し、表示された USB ドライブに合う .uf2 をコピーしてください。シヴィライゼーション7 でマルチプレイヤーのワイヤレスロビーのチャットを開いて Pico を挿すと打ち込みが始まります (約24分)。画面に Awaiting payload at <本体IP>:9026 が出ればローダー起動完了です。