Repository navigation
Releases
20261118-0053
kaiHEN Installer — build 20261118-0053
Windows and Android builds of kaiHEN Installer, a no-install GUI for
starting kaiHEN on a Switch 2 (firmware exactly 23.0.1) via
Civilization VII, with an autoloader option, a homebrew catalog and
FTP install.
Downloads
- kaiHEN Installer.zip — Windows (unzip and run the .exe, no install)
- kaiHEN-Installer-Android.apk — Android 8.0+ (sideload; same GUI and
features as the Windows build)
Fix in this build
- Catalog installs of tree-style releases (RetroArch) dropped the
top-levelretroarch/data folder: only the frontend inswitch/
was installed, so RetroArch ran without its fonts (Japanese and
other non-Latin languages garbled) and without its cores. The whole
retroarch/folder is now installed as well. Reinstall RetroArch
from the catalog with this build to fix an existing installation.
Recent changes
- The self-update flow shows progress in the update dialog and shows
the reason when it fails. On Android it asks for the install
permission first, before downloading. - KaiPlayer added to the homebrew catalog (15 entries); catalog
downloads now also work for prerelease-only repositories. - Self-update: at startup the app checks this repository's releases.
Windows replaces itself and restarts, keeping your settings and
downloaded files. Android downloads the new APK in the app and
opens the phone's standard install screen.
Caution
Starting kaiHEN from the Android app has not been tested yet. The
GUI, downloads and homebrew installation from the phone are verified
on real hardware, but the kaiHEN launch itself (the phone runs the
launch engine internally) is still unconfirmed. If it does not work,
use the Windows version to start kaiHEN.
kaiHEN Installer — build 20261118-0053
Switch 2(ファームウェア 23.0.1 ちょうど必須)でシヴィライゼーション7
経由で kaiHEN を起動するための、インストール不要の GUI です。
オートローダー、自作ソフトのカタログと FTP インストール付き。
ダウンロード
- kaiHEN Installer.zip — Windows 版(解凍して .exe を実行、インストール不要)
- kaiHEN-Installer-Android.apk — Android 8.0 以上(サイドロード用。
Windows 版と同じ画面・同じ機能)
今回の修正
- ツリー形式のソフト(RetroArch)のカタログインストールで、SD ルート
直下のretroarch/データフォルダを取りこぼしていた問題を修正
しました。これまではswitch/の本体だけが入り、RetroArch が
フォント無し(日本語などが文字化け)・コア無しで起動していました。
このビルドで RetroArch をカタログから入れ直すと直ります。
最近の変更
- 自動更新の進捗を更新ダイアログに表示し、失敗時は理由も出すように
しました。Android ではダウンロード前にインストール許可を確認
します。 - 自作ソフトのカタログに KaiPlayer を追加(15 項目)。プレリリース版
しかないソフトもカタログから取得できるようにしました。 - 自動更新: 起動時にこのリポジトリの最新リリースを確認します。
Windows はプログラムを入れ替えて自動で再起動(設定やダウンロード
済みのファイルは保持)。Android は新しい APK をアプリ内で
ダウンロードし、スマホ標準のインストール画面を開きます。
注意
スマホアプリからの kaiHEN 起動はまだ試せていません。 スマホ版の
画面表示、ダウンロード、自作ソフトのインストールは実機で確認済み
ですが、kaiHEN の起動そのもの(スマホ内部で起動エンジンが動きます)は
未確認です。うまくいかない場合は Windows 版で kaiHEN を起動して
ください。
20261117-2135
kaiHEN Installer — build 20261117-2135
Windows and Android builds of kaiHEN Installer, a no-install GUI for
starting kaiHEN on a Switch 2 (firmware exactly 23.0.1) via
Civilization VII, with an autoloader option, a homebrew catalog and
FTP install.
Downloads
- kaiHEN Installer.zip — Windows (unzip and run the .exe, no install)
- kaiHEN-Installer-Android.apk — Android 8.0+ (sideload; same GUI and
features as the Windows build)
Fix in this build
- The self-update flow now shows its progress in the update dialog
while it works, and shows the reason in the dialog when it fails.
Before, tapping "Update now" closed the dialog and progress only
went to the log, so on some pages it looked like nothing happened. - On Android, the update now asks for the install permission first:
if installs from this app are not allowed yet, the settings screen
opens right away when you tap "Update now" (allow it there, then
tap Update again), instead of after the download.
Recent changes
- KaiPlayer added to the homebrew catalog (15 entries); catalog
downloads now also work for prerelease-only repositories. - Self-update: at startup the app checks this repository's releases.
Windows replaces itself and restarts, keeping your settings and
downloaded files. Android downloads the new APK in the app and
opens the phone's standard install screen.
Caution
Starting kaiHEN from the Android app has not been tested yet. The
GUI, downloads and homebrew installation from the phone are verified
on real hardware, but the kaiHEN launch itself (the phone runs the
launch engine internally) is still unconfirmed. If it does not work,
use the Windows version to start kaiHEN.
kaiHEN Installer — build 20261117-2135
Switch 2(ファームウェア 23.0.1 ちょうど必須)でシヴィライゼーション7
経由で kaiHEN を起動するための、インストール不要の GUI です。
オートローダー、自作ソフトのカタログと FTP インストール付き。
ダウンロード
- kaiHEN Installer.zip — Windows 版(解凍して .exe を実行、インストール不要)
- kaiHEN-Installer-Android.apk — Android 8.0 以上(サイドロード用。
Windows 版と同じ画面・同じ機能)
今回の修正
- 自動更新の進捗を、更新ダイアログの中に表示し続けるようにしました。
失敗したときも、理由をダイアログに出します。これまでは「更新する」を
押すとダイアログが閉じて進捗がログにしか出なかったため、ページに
よっては何も起きていないように見えていました。 - Android では、更新の前にインストール許可を確認するようにしました。
まだ許可されていない場合は、「更新する」を押した時点で設定画面が
すぐ開きます(そこで許可して、もう一度「更新する」を押して
ください)。これまではダウンロードが終わってからでした。
最近の変更
- 自作ソフトのカタログに KaiPlayer を追加(15 項目)。プレリリース版
しかないソフトもカタログから取得できるようにしました。 - 自動更新: 起動時にこのリポジトリの最新リリースを確認します。
Windows はプログラムを入れ替えて自動で再起動(設定やダウンロード
済みのファイルは保持)。Android は新しい APK をアプリ内で
ダウンロードし、スマホ標準のインストール画面を開きます。
注意
スマホアプリからの kaiHEN 起動はまだ試せていません。 スマホ版の
画面表示、ダウンロード、自作ソフトのインストールは実機で確認済み
ですが、kaiHEN の起動そのもの(スマホ内部で起動エンジンが動きます)は
未確認です。うまくいかない場合は Windows 版で kaiHEN を起動して
ください。
kaiHEN Installer — build 20261117-0327
kaiHEN Installer — build 20261117-0327
The first public release of kaiHEN Installer: a no-install Windows GUI
that sets up kaiHEN (by ouncebrew) on a Nintendo Switch 2 using
Civilization VII (Switch 1 version, v1.0.0).
kaiHEN Installer の初回公開リリースです。シヴィライゼーション7
(Switch 1 版 v1.0.0) を入口に、Switch 2 へ kaiHEN を導入するための
インストール不要の Windows 用 GUI です。
Requirements / 前提
Nintendo Switch 2 on firmware exactly 23.0.1 — never accept a
system update
Civilization VII, Switch 1 version, cartridge v1.0.0 (no game updates)
A Windows PC on the same network as the console
For the first setup: a Raspberry Pi Pico or Pico 2 (not needed
afterwards when using the autoloader)
本体のファームウェアは 23.0.1 ちょうど必須です (本体の更新は絶対に
しないでください)。シヴィライゼーション7 は Switch 1 版カード v1.0.0
(ゲームの更新なし) が必要です。
How to use / 使い方
Download kaiHEN Installer.zip below and unzip it.
Run kaiHEN Installer.exe (no installation; no Python or Node
required).
Follow the on-screen steps — see the
README for a
screenshot guide of every page.
下の kaiHEN Installer.zip をダウンロードして展開し、
kaiHEN Installer.exe を実行するだけです。全ページのスクショ付き
紹介は README にあります。
Highlights of this build / このビルドの内容
Autoloader with timing learning: the winning FS timing is recorded
in the save and reused from the next boot (verified on real hardware —
kaiHEN boots at a high rate from the second boot onward).
Freeze fix: if the file-system service stops responding during the
canary check, the run now stops safely with a message instead of
hanging forever (verified on real hardware).
Autoloader page: SD files are prepared from the "open SD folder"
button; failure and success guidance is keyed to the exact messages
shown on the console screen.
オートローダーのタイミング学習: 成功したタイミングをセーブに
記録し、次回起動から再利用します (実機確認済み。2回目以降は高い
確率で kaiHEN が起動します)。
フリーズ修正: canary 確認中に FS サービスが無応答になっても、
永久に固まらず、メッセージを出して安全に止まります (実機確認済み)。
オートローダーページの整備: SD ファイルは「SD 用フォルダを開く」
から用意。失敗・成功の案内は本体画面に出る文言に合わせてあります。
File / ファイル
kaiHEN Installer.zip — 43,985,047 bytes
SHA-256: 0d34620eaee66cb970dc8cec56189cf265e302d6f00c426acdc06d82a9cd3998
At your own risk: kaiHEN is work-in-progress software that grants
homebrew full access including NAND. See the README warnings.
kaiHEN は開発途中のソフトで、自作ソフトに NAND を含む全権限を与え
ます。README の警告を必ず読んでください。すべて自己責任です。