Repository navigation
ZenLink v2.2.3
Mirror, control and live-stream your iPhone or iPad on Windows — by Zenvy Zenshiro.
ZenLink has a new window. It is built natively for Windows with GPU video, and has a Liquid Glass design.
What's new
- New ZenLink window. Native app (Rust) with video decoded on the GPU (H.264 and HEVC). The window fits the picture, and settings open beside it.
- Liquid Glass design. Dark (default), light and System themes. Glass strength starts at 30% and can be changed in Settings.
- Driver changes in the window. When the device uses the wrong USB driver for the chosen mode, the window says so and offers Restore Apple driver or Install ZenLink Studio driver (each asks first; Windows asks for administrator approval).
- Choose the connection mode at start. ZenLink asks: Apple Driver or ZenLink Studio, over the cable or Wi-Fi. Change it later with the Change mode (Ganti mode) button in Settings.
- Cable or Wi-Fi for both Apple Driver and ZenLink Studio, in Settings → Connection & driver.
- Step-by-step connecting, like before: the device shows as ready with its cable, and Start mirroring opens the 1-2-3-4 progress card. If it fails, the card says why and offers Try again.
- Both modes: up to 60 fps.
- Full screen with the header button or F11 (Esc leaves), and Control Center / Notification Center buttons that open and close with one press.
Fixed
- A device showed "Ready" but failed with "tap Trust" when it was on the ZenLink Studio driver in Apple mode. The window now shows what the device needs, and Start uses a device that is ready.
- Light theme turned grey after full screen (until a restart). Full screen keeps the window's transparency now.
- An iPhone could not connect after an iPad had been set up for Wi-Fi (until settings were reset). A trusted device on the cable now always works over the cable and goes first.
- The picture froze after changing the fit or rotation. Rendering now recovers by itself.
- Restart connection did nothing while the old session was still closing.
- Set up Wi-Fi now says when the device still needs Trust, or when Wi-Fi is already set up, and no longer gives up after 5 seconds.
- Full screen now covers the whole screen and keeps the chosen theme.
- Driver signing reported a failure ("root certificate which is not trusted") although the catalog was signed. ZenLink now checks the signature itself.
- OBS capture showed uneven or repeated frames. Frames are now shown in step with the display.
- The background service stops when ZenLink closes.
Good to know
- ZenLink now runs as two processes: ZenLink.exe (the window) and ZenLinkService.exe (device connection, AirPlay and audio). The Windows firewall rule for AirPlay is set on ZenLinkService.exe.
- The Portable.exe unpacks the service once to
%LOCALAPPDATA%\ZenLink\service. - Tested with recorded streams, not yet on a real device: full screen, the Control Center / Notification Center buttons, Wi-Fi setup, the iPhone-after-iPad fix and the driver buttons. Tried it? Feedback.
Unchanged
Apple Driver mode (Native and Hybrid Control), ZenLink Studio over the cable and AirPlay, switching the USB driver, restoring Apple's driver and automatic rollback all work as in v2.2.2.
Downloads
| File | For |
|---|---|
| ZenLink-v2.2.3-Setup.exe | Installer (recommended). |
| ZenLink-v2.2.3-Portable.exe | One file, no installation: download and run. Settings are kept in %LOCALAPPDATA%\ZenLink. |
| ZenLink-v2.2.3-Portable-Source.zip | Source code with a ready-built ZenLink.exe; Start ZenLink.bat sets up Python on first run. |
Requirements
- Windows 10 (1809+) or Windows 11, 64-bit.
- Apple Driver mode: iOS 17 or later, Developer Mode on, and Apple Devices or iTunes installed. On iOS 17–26 the PC and the device must also be on the same Wi-Fi (for AirPlay).
- ZenLink Studio: over the cable or AirPlay (Wi-Fi). No Developer Mode needed.
Licensed under GPL-3.0-or-later. Support: https://sociabuzz.com/zenvy/tribe