Repository navigation
Releases
Oh My Code 0.1.8
Changelog
Added
- An app icon: a lime orbit around </> in a hexagon, after the ZeroVoid Lab mark. On macOS 26
and later it's drawn by the system in its own shape; the welcome window and the start page
show it too.
Fixed
- The commit popover shown when hovering the blame annotation stays open while the mouse moves
up into it, and closes once the mouse leaves it.
Full history: CHANGELOG.md · Changes: v0.1.7...v0.1.8
Download
OhMyCode-0.1.8.dmg: open it and drag Oh My Code to Applications. Requires macOS 15.0 or later on an Apple silicon Mac. Copies from 0.1.2 on update themselves (Oh My Code ▸ Check for Updates…).
This build is ad-hoc signed and not notarized. The first time you open it, right-click the app and choose Open, or run:
xattr -dr com.apple.quarantine "/Applications/Oh My Code.app"SHA-256: cb39cde8da432944c7c73cf0bc14d13015379c791ee933f3d67442ddfec8cafa
Oh My Code 0.1.7
Changelog
Changed
- Saving (⌘S) a file that changed on disk since it was opened asks first: overwrite it, revert
to what's on disk, or cancel. - Files dropped on the Explorer from outside the folder (from Finder, say) are copied in, not
moved. - Closing a window with no folder asks about its unsaved files.
- A language server that crashes is started again (up to three times in three minutes), with
the open files.
Fixed
- Crashes: writing to an agent or language server that had just exited; out-of-range line
numbers or sizes from a language server, extension or agent; editing inside a merge conflict
right before its markers were rescanned. - Files with Windows (CRLF) line endings: change markers, Revert and Stage Change, blame,
Enter, snippets and multi-cursor movement now treat them line by line. - Unsaved changes to a file deleted on disk (by a branch switch, say) are no longer dropped at
the next launch; picking a profile sync folder no longer overwrites the profile already there;
an unreadable keybindings.json is backed up before it's replaced; saving keeps a UTF-8 byte
order mark and writes through symlinks. - Tasks, terminals, the debugger, language servers and agent commands stop when their window
closes or the app quits; closed terminals no longer leave processes behind. - Agents and extensions can't reach files outside the folder through a symlink to a new file;
extensions without the file-system permission can't write into .git; the Markdown preview
stays on its own page; task variables such as ${file} are quoted for the shell. - Completions replace the whole range the language server names and add the imports it asks
for; breakpoints follow renamed files; a failed debug launch shows its error; whole-word
search and replace match the same text; file names with [ ] or * stage and discard only
themselves; files added withgit add -Nshow in Source Control. - Explorer rows no longer show the previous row's name and icon faded over them.
Full history: CHANGELOG.md · Changes: v0.1.6...v0.1.7
Download
OhMyCode-0.1.7.dmg: open it and drag Oh My Code to Applications. Requires macOS 15.0 or later on an Apple silicon Mac. Copies from 0.1.2 on update themselves (Oh My Code ▸ Check for Updates…).
This build is ad-hoc signed and not notarized. The first time you open it, right-click the app and choose Open, or run:
xattr -dr com.apple.quarantine "/Applications/Oh My Code.app"SHA-256: 3055f365fb16a31139e29b0afaa6358166cdc44285ae86b89364bdb076bfbc89
Oh My Code 0.1.6
Changelog
Added
- Earlier agent threads can be reopened (Agent sidebar ▸ ⋯ ▸ Open Earlier Thread), with the
conversation shown again, for agents that can reopen sessions (Claude Code's adapter can).
Changed
- A new look for finding your way around:
- The sidebar's panels are an activity bar down its left edge, each icon with its name and
shortcut, the active one marked, with counts where they help (changed files) and a dot when
the agent is working or waiting for you. Settings is at its foot. - Each panel has a header naming it, with its actions (New File and New Folder in the
Explorer, Refresh in Source Control). - An editor with no file open shows a start page: the folder and its branch, ways to get going
with their shortcuts, and the files opened lately. - Files have icons by kind (Swift, Markdown, JSON, …) in the Explorer and on tabs; the active
tab is marked with a line in the accent color. - The welcome window lists recent folders with their locations, and shows the version.
- In the status bar, the branch opens Source Control, the cursor's position opens Go to Line,
and the agent's work (or its question) shows, opening the Agent sidebar.
- The sidebar's panels are an activity bar down its left edge, each icon with its name and
- Tool calls and permission requests in the Agent sidebar name files inside the folder by their
path in it, not their full path.
Full history: CHANGELOG.md · Changes: v0.1.5...v0.1.6
Download
OhMyCode-0.1.6.dmg: open it and drag Oh My Code to Applications. Requires macOS 15.0 or later on an Apple silicon Mac. Copies from 0.1.2 on update themselves (Oh My Code ▸ Check for Updates…).
This build is ad-hoc signed and not notarized. The first time you open it, right-click the app and choose Open, or run:
xattr -dr com.apple.quarantine "/Applications/Oh My Code.app"SHA-256: 15bf02f37ae855e3edb265c49680402a360bd5e5fb896bc4be5040f7f919f237
Oh My Code 0.1.5
Changelog
Added
- Coding agents in the editor: the Agent sidebar talks to any agent that speaks the Agent Client
Protocol (Claude Code and Codex through their adapters, Gemini CLI). It shows the reply, the
plan, the files the agent reads and the commands it runs, asks before edits and commands, and
shows proposed edits as diffs. Its model and other settings it offers are picked above the
prompt. Agents are set up in Settings ▸ Agents. - Claude Code in the terminal connects to the window, as it does to VS Code: it sees the open
files, the selection and the problems, and its proposed edits open as diff tabs to accept or
reject. ⌥⌘K sends the selected lines to it, and the status bar shows when it's connected.
Full history: CHANGELOG.md · Changes: v0.1.4...v0.1.5
Download
OhMyCode-0.1.5.dmg: open it and drag Oh My Code to Applications. Requires macOS 15.0 or later on an Apple silicon Mac. Copies from 0.1.2 on update themselves (Oh My Code ▸ Check for Updates…).
This build is ad-hoc signed and not notarized. The first time you open it, right-click the app and choose Open, or run:
xattr -dr com.apple.quarantine "/Applications/Oh My Code.app"SHA-256: d024f15f752a719948f8a5273af80dde2ed4703772fba9002f74a253cfa61c73
Oh My Code 0.1.4
Changelog
Fixed
- Typing in one half of a split no longer moves the other half. With the other half further
down a long file, each keystroke above it showed it other lines (thousands away in a 3 MB
file); it now keeps its top line. Edits above the view from anywhere else (Replace All, a
rename) keep it too. - Typing above where another view of the same file has scrolled through stays fast. The lines
laid out along the way are now dropped above and between views too, not only below them; a
keystroke took 307 ms in a 3 MB file, now about 5. - A file's history no longer reads a rename line with too few fields (the check applied only to
copies).
Full history: CHANGELOG.md · Changes: v0.1.3...v0.1.4
Download
OhMyCode-0.1.4.dmg: open it and drag Oh My Code to Applications. Requires macOS 15.0 or later on an Apple silicon Mac. Copies from 0.1.2 on update themselves (Oh My Code ▸ Check for Updates…).
This build is ad-hoc signed and not notarized. The first time you open it, right-click the app and choose Open, or run:
xattr -dr com.apple.quarantine "/Applications/Oh My Code.app"SHA-256: b7288c2f88da8fc36820bfd24ae0d29b05405962a2b0e91993fac589ddec8a10
Oh My Code 0.1.3
Changelog
Fixed
- Scrolling with the minimap shown no longer keeps the syntax highlighter busy. The minimap
asked for the colors of the few hundred lines it shows at every line scrolled, about twice
per scroll event (some 9 ms of background work each, delaying the editor's own colors); it
now asks for half a minimap more each way, so once every half a minimap of scrolling.
Full history: CHANGELOG.md · Changes: v0.1.2...v0.1.3
Download
OhMyCode-0.1.3.dmg: open it and drag Oh My Code to Applications. Requires macOS 15.0 or later on an Apple silicon Mac. Copies from 0.1.2 on update themselves (Oh My Code ▸ Check for Updates…).
This build is ad-hoc signed and not notarized. The first time you open it, right-click the app and choose Open, or run:
xattr -dr com.apple.quarantine "/Applications/Oh My Code.app"SHA-256: 737976d46c57b5bd187127d62f2b90d230e9f9d5495f54407e2b7177cadb9c5a
Oh My Code 0.1.2
Changelog
Added
- Updates from the GitHub releases. Oh My Code checks at launch and once a day, shows what's
new, and downloads and installs the update when you choose to, then relaunches. Turn the
checks off in Settings ▸ Updates, or check now with Oh My Code ▸ Check for Updates…. Each
update is signed, and one whose signature doesn't match isn't installed. Copies older than
this version don't have it: install this one by hand once.
Fixed
- Syntax colors that arrive after the text is drawn now show. A file just opened (or a window
opened in the background) stayed uncolored until its lines were edited or scrolled, because
TextKit doesn't redraw text whose rendering attributes change. - Run and Debug no longer pushes the sidebar up under the title bar. With nothing to run, its
text asked for a window 1,746 pt tall; in a shorter window the whole sidebar, its picker too,
was cut off at the top.
Full history: CHANGELOG.md · Changes: v0.1.1...v0.1.2
Download
OhMyCode-0.1.2.dmg: open it and drag Oh My Code to Applications. Requires macOS 15.0 or later on an Apple silicon Mac. Copies from 0.1.2 on update themselves (Oh My Code ▸ Check for Updates…).
This build is ad-hoc signed and not notarized. The first time you open it, right-click the app and choose Open, or run:
xattr -dr com.apple.quarantine "/Applications/Oh My Code.app"SHA-256: 9d3d5d9d567ebe403b45ee6c6f802cbeac04cd64928b19b2f310729816a22eb6
Oh My Code 0.1.1
Changelog
Performance
- The minimap keeps its picture between frames. A keystroke repaints only its own line, and scrolling copies the rows already painted and paints only the lines that come into view. A new syntax highlight result repaints only the lines whose colors changed.
- Moving the minimap's slider paints nothing: the slider is a layer of its own.
- Drawing per keystroke went from 2.1 to 1.3 ms, and a full minimap repaint from 1.2 to 0.5 ms (Release, 1–20 MB files).
Full history: CHANGELOG.md · Changes: v0.1.0...v0.1.1
Download
OhMyCode-0.1.1.dmg: open it and drag Oh My Code to Applications. Requires macOS 15 or later on an Apple silicon Mac.
This build is ad-hoc signed and not notarized. The first time you open it, right-click the app and choose Open, or run:
xattr -dr com.apple.quarantine "/Applications/Oh My Code.app"SHA-256: faeb700707b86914004b352e2504d89f5cfed62d23066c61fa717d92d433d386
Oh My Code 0.1.0
First public build of Oh My Code, a native macOS code editor built for Apple silicon.
Download
OhMyCode-0.1.0.dmg: open it and drag Oh My Code to Applications. Requires macOS 15 or later on an Apple silicon Mac.
This build is ad-hoc signed and not notarized. The first time you open it, right-click the app and choose Open, or run:
xattr -dr com.apple.quarantine "/Applications/Oh My Code.app"Performance on large files
- Typing stays under a millisecond of editor work, whatever the file's size. With drawing it takes about 2 ms per keystroke.
- The first screen of a 20 MB file shows in about 80 ms.
- Files over 1 MB are parsed a window at a time. A 5 MB file adds about 15 MB of memory.
- The gutter and overlays redraw only the rows and marks that change. Moving the cursor repaints two line numbers.
SHA-256: d9fdc7b739c1eebcd0a2ea80b38c63854d74c0b10d459d092e17310ff5181f21