ZSilent 4.0.7

ZSilent 4.0.7 incorpora el nodo Zoka 4.0.5 y corrige el saldo mientras un envío espera un bloque.

• El total ya no esconde lo reservado por un envío sin minar. Un envío reserva su nota más grande hasta que se mina o vence. Antes el total la dejaba afuera y podía parecer que faltaban fondos; ahora entra en el total y la tarjeta Pending muestra cuánto está reservado.
• El explorador vuelve a listar los últimos bloques: los nonces de Zoka Quantic no entraban en el número que usaba la app.
• Buscar un pago por su id muestra si está pendiente o en qué bloque entró. Buscar un bloque por su hash vuelve a funcionar.
• El nodo 4.0.5 pide los pagos pendientes a las semillas, así un pago llega antes a los mineros.
• Conserva Tor opcional, apagado por defecto, con Tor 0.4.9.14 incluido en el instalador, y la cadena y las billeteras de la testnet v2.

Cerrá ZSilent antes de instalar ZSilent-Core-4.0.7.msi. Verificá su SHA-256 con SHA256SUMS.txt; release-manifest.json identifica los binarios y el manifiesto de red incluidos.

La minería requiere XMRig. La autoridad de checkpoints continúa en la PC del equipo.

ZSilent 4.0.6

Reemplazada por v4.0.7. Actualizá para ver el total correcto mientras un envío espera un bloque.

ZSilent 4.0.6 incorpora el nodo Zoka 4.0.4 y el manifiesto actualizado de Zoka Quantic Testnet v2.

• Conecta con seed2 y seed3 en sus servidores permanentes, por IP fija; la sincronización ya no requiere que la PC del equipo esté prendida.
• Conserva Tor opcional, apagado por defecto, con Tor 0.4.9.14 incluido en el instalador.
• Conserva la cadena y las billeteras de la testnet v2.

Cerrá ZSilent antes de instalar ZSilent-Core-4.0.6.msi. Verificá su SHA-256 con SHA256SUMS.txt; release-manifest.json identifica los binarios y el manifiesto de red incluidos.

La minería requiere XMRig. La autoridad de checkpoints continúa en la PC del equipo.

ZSilent 4.0.5: optional Tor mode

Reemplazada por v4.0.6, con el nodo 4.0.4 y las semillas permanentes.

A release of the official desktop wallet for Zoka Quantic Testnet v2, for Windows 10 and
11 (x64). Same chain and no consensus change. For what testnet v2 is, see the
4.0.0 release notes.

Test coins, no value.

What changed

• Tor mode, optional and off by default. Settings → Network → Reach the network only
  through Tor. ZSilent starts its own Tor (it comes with the installer again) and the node
  connects only through it, to the network's onion seeds: peers and relays no longer see this
  computer's IP address, and your internet provider does not see that you use Zoka. Your
  payments are private either way.
  • It costs speed: syncing and sending are slower, and a block you mine takes a few seconds
    longer to reach the network.
  • If Tor cannot start, the node stays off rather than connecting without it.
  • The top bar shows a Tor badge while it is on.
• Bundles the Zoka node 4.0.3 (Tor mode, an onion seed and faster sync; see its
  release notes) and Tor
  0.4.9.14 from the Tor Expert Bundle 15.0.25, checked against the Tor Project's published hash.

Install

1. Download ZSilent-Core-4.0.5.msi.

2. Check its SHA-256 before running it:

   Get-FileHash .\ZSilent-Core-4.0.5.msi -Algorithm SHA256

   It must be:

   1a20472f267e391b63ebfcd8da56dc17b3064f341ccdd28c290d5e935a59cc60
   

3. Close ZSilent if it is open, and run the installer. It installs for your user only,
   without administrator rights.

The installer is not code-signed yet, so Windows SmartScreen may warn about it. A matching
SHA-256 is how you know the file is the official one.

Coming from 4.0.x? Install over it: your wallets, your node's identity and the chain stay.
Log in again so the node restarts with your Stratum settings. Tor mode stays off until you
turn it on.

Source: https://github.com/zoka-network/zsilent-core

ZSilent 4.0.4: no Tor indicators, long values that fit

Superseded by ZSilent 4.0.5, which adds the optional Tor mode.

A release of the official desktop wallet for Zoka Quantic Testnet v2, for Windows 10 and
11 (x64). Same chain and no consensus change. For what testnet v2 is, see the
4.0.0 release notes.

Test coins, no value.

What changed

• No more Tor indicators. The testnet v2 node reaches its peers over QUIC, which runs on
  UDP, and Tor only carries TCP: there is no Tor transport yet, and nothing in the app could
  turn it on. The "TOR OFF" badge, the "Tor is off" warning and the "Privacy & Tor" card are
  gone. Network privacy, in Settings, says what the network sees: peers and n0's relays
  see this computer's IP address and that it runs a Zoka node; your payments stay private.
  An optional Tor mode is planned.
• Long values fit, and copy. Addresses, view keys and hashes in Settings and the explorer
  were cut at the end, and the copy button could fall out of the row. They are now cut in the
  middle, so the start and the end stay visible, and the copy button always copies the whole
  value.
• Bundles the Zoka node 4.0.2, unchanged
  (release notes).

Install

1. Download ZSilent-Core-4.0.4.msi.

2. Check its SHA-256 before running it:

   Get-FileHash .\ZSilent-Core-4.0.4.msi -Algorithm SHA256

   It must be:

   df5ea7ff6504ebf3c931752d35c53deaacd5b3f12ad5650c6efb698439b9a22c
   

3. Close ZSilent if it is open, and run the installer. It installs for your user only,
   without administrator rights.

The installer is not code-signed yet, so Windows SmartScreen may warn about it. A matching
SHA-256 is how you know the file is the official one.

Coming from 4.0.x? Install over it: your wallets, your node's identity and the chain stay.
Log in again so the node restarts with your Stratum settings.

Source: https://github.com/zoka-network/zsilent-core

ZSilent 4.0.3: your view key, with the Zoka node 4.0.2

Superseded by ZSilent 4.0.4, which removes the Tor indicators and fits long addresses and keys.

A release of the official desktop wallet for Zoka Quantic Testnet v2, for Windows 10 and
11 (x64). Same chain and no consensus change. For what testnet v2 is, see the
4.0.0 release notes.

Test coins, no value.

What changed

• Your view key, where the empty keys were. Settings → Security showed "Scan private
  key" and "Spend private key" with nothing in them: those were the two keys of the old
  Zenith wallets, which a Zoka Quantic wallet does not have. Show view key now shows the
  wallet's view key, zqtestview2…. It sees every payment of the wallet and its balance,
  here or on zokascan.cc/wallet, which opens it inside your
  browser. It cannot spend: spending needs your recovery phrase, since a Zoka Quantic
  wallet has no separate spend key. Share it only as you would a bank statement; it cannot be
  revoked.
• Bundles the Zoka node 4.0.2 (view keys and the public explorer API; see its
  release notes).

Install

1. Download ZSilent-Core-4.0.3.msi.

2. Check its SHA-256 before running it:

   Get-FileHash .\ZSilent-Core-4.0.3.msi -Algorithm SHA256

   It must be:

   e2e8ea7d5d25ee157ab39364f90985004b05cfb25721001b429b9f778b4d23b8
   

3. Close ZSilent if it is open, and run the installer. It installs for your user only,
   without administrator rights.

The installer is not code-signed yet, so Windows SmartScreen may warn about it. A matching
SHA-256 is how you know the file is the official one.

Coming from 4.0.x? Install over it: your wallets, your node's identity and the chain stay.
Log in again so the node restarts with your Stratum settings.

Source: https://github.com/zoka-network/zsilent-core

ZSilent 4.0.2: the app reads its node again

Superseded by ZSilent 4.0.3, which shows the wallet's view key where the empty keys were.

A fix release of the official desktop wallet for Zoka Quantic Testnet v2, for Windows 10
and 11 (x64). Same chain and no consensus change. For what testnet v2 is, see the
4.0.0 release notes.

Test coins, no value.

What changed

• The app reads its node again. ZSilent 4.0.0 and 4.0.1 built their connection to the
  local node from a setting that the testnet v2 network manifest does not carry, so every status
  request failed before it connected. The node and mining kept working, but the app showed no
  chain height, peers or Stratum status, and it refreshed your balance only when you logged
  in. 4.0.2 falls back to the node's default local address, 127.0.0.1:9140.
• Bundles the Zoka node 4.0.1, unchanged.

Install

1. Download ZSilent-Core-4.0.2.msi.

2. Check its SHA-256 before running it:

   Get-FileHash .\ZSilent-Core-4.0.2.msi -Algorithm SHA256

   It must be:

   12ae31e6eae4413f77ed5ac212e7c54babfb0b93d3e0a69d09c29afb30f52493
   

3. Close ZSilent if it is open, and run the installer. It installs for your user only,
   without administrator rights.

The installer is not code-signed yet, so Windows SmartScreen may warn about it. A matching
SHA-256 is how you know the file is the official one.

Coming from 4.0.0 or 4.0.1? Install over it: your wallets, your node's identity and the
chain stay. Log in again so the node restarts with your Stratum settings.

Source: https://github.com/zoka-network/zsilent-core

ZSilent 4.0.1: a smaller installer, without Tor

Superseded by ZSilent 4.0.2, which fixes the app not reading its node's status.

A maintenance release of the official desktop wallet for Zoka Quantic Testnet v2, for
Windows 10 and 11 (x64). Same chain and no consensus change. For what testnet v2 is, see the
4.0.0 release notes.

Test coins, no value.

What changed

• No Tor in the installer. The v2 node reaches the network over QUIC through relays, and
  ZSilent 4.0 never starts Tor: the Tor package traveled in the MSI unused. The installer is
  about 22 MB smaller.
• Bundles the Zoka node 4.0.1, whose Stratum counts only the blocks that stay on the
  chain: a second solution XMRig finds for the same job no longer shows as a block found.

Install

1. Download ZSilent-Core-4.0.1.msi.

2. Check its SHA-256 before running it:

   Get-FileHash .\ZSilent-Core-4.0.1.msi -Algorithm SHA256

   It must be:

   77fdc92be84c8c1cec0af266c24325be4236b03f4d3d1f5d6fa9544905dd765d
   

3. Close ZSilent if it is open, and run the installer. It installs for your user only,
   without administrator rights.

The installer is not code-signed yet, so Windows SmartScreen may warn about it. A matching
SHA-256 is how you know the file is the official one.

Coming from 4.0.0? Install over it: your wallets, your node's identity and the chain stay.
Log in again so the node restarts with your Stratum settings.

Prefer a terminal? The CLI miner for Windows and Linux is in the zoka-network/zokanetwork
release 4.0.1.

Source: https://github.com/zoka-network/zsilent-core

ZSilent 4.0.0: the wallet for Zoka Quantic Testnet v2

Superseded by ZSilent 4.0.1, a maintenance release on the same chain.

The official desktop wallet for Zoka Quantic Testnet v2, for Windows 10 and
11 (x64). Self-custodial, with its own node. Testnet v2 started on 29 October
2026 and its private pool is post-quantum end to end: STARK spend proofs,
X-Wing note encryption and ML-DSA node identities.

Test coins, no value. Testnet v2 replaces testnet v1: wallets and coins from
ZSilent 3.0 do not carry over.

Highlights

• Post-quantum private pool: spends proven with STARKs (Plonky3 over
  Poseidon2) instead of Halo 2, and notes encrypted with X-Wing (ML-KEM-768 +
  X25519).
• No Tor, no open ports: the node talks over QUIC (iroh), with a hybrid
  X25519MLKEM768 TLS handshake and an ML-DSA-65 signature on every connection,
  and reaches the network through n0's relays.
• Mining with XMRig: turn on the Stratum section and point XMRig
  (rx/0) at your node. Every block it finds pays your wallet. There is no
  built-in miner on testnet v2.
• Short addresses v2: share a 57-character address (zqtest2…) instead of
  the full one (about 1,760 characters). ZSilent publishes it to the network.
• Node screen: peers, the latest checkpoint, the address directory and your
  node's identity.
• Lighter: the node verifies with RandomX's light mode and uses about 300 MB
  of RAM, leaving the 2 GB of the fast mode to XMRig.
• Bundles the Zoka node 4.0.0.

Install

1. Download ZSilent-Core-4.0.0.msi.

2. Check its SHA-256 before running it:

   Get-FileHash .\ZSilent-Core-4.0.0.msi -Algorithm SHA256

   It must be:

   e55caae930a3d0792698b92b275c949057234ec851a4d3dcf8b7b91794ed8eb2
   

3. Run it. It installs for your user only, without administrator rights.

The installer is not code-signed yet, so Windows SmartScreen may warn about it.
A matching SHA-256 is how you know the file is the official one.

Coming from ZSilent 3.0? 4.0 replaces it and starts with a new setup: create
a wallet, or restore one of testnet v2 with its 24 words. Your 3.0 wallets stay
on disk where they were, but 4.0 does not open them.

When you create a wallet, write down its 24 words on paper: they are the only
way to recover it.

Prefer a terminal? The CLI miner for Windows and Linux is in the
zoka-network/zokanetwork release 4.0.0.

Source: https://github.com/zoka-network/zsilent-core

ZSilent 3.0.5: the official wallet for the Zoka Quantic Testnet

Superseded by ZSilent 4.0.0. Testnet v1 was replaced by Zoka Quantic Testnet v2 on 29 October 2026, and this version cannot join it.

The official desktop wallet for Zoka Quantic Testnet, for Windows 10 and 11
(x64). Self-custodial, with its own node, one-button mining and a Stratum
switch for XMRig. It is the first public release for Zoka Quantic; ZSilent
releases before 3.0 belong to a retired network and cannot join it.

Testnet coins have no value. The testnet restarts from zero when the fully
post-quantum private pool is ready.

Highlights

• Short addresses: share a 57-character address (zqtest1…) instead of the
  1,730-character one. ZSilent publishes it to the network by itself, so anyone
  can pay it.
• A standard QR code that phone cameras read at once.
• Mining: one button for ZSilent's own miner, or the new Stratum
  section to let XMRig mine against your node, on this computer or your local
  network.
• Private by default: X-Wing (ML-KEM-768) note encryption and Halo 2 spend
  proofs, with a node that reaches the network over Tor.
• New Zoka Quantic logo.
• Bundles the Zoka node 3.0.4.

Install

1. Download ZSilent-Core-3.0.5.msi.

2. Check its SHA-256 before running it:

   Get-FileHash ".\ZSilent-Core-3.0.5.msi" -Algorithm SHA256

   It must be:

   7b14f365ae079c4fbc8e816ef2e4a6504e50b35c332c2dc3620d2af1cb161bab
   

3. Run it. It installs for your user only, without administrator rights.

The installer is not code-signed yet, so Windows SmartScreen may warn about it.
A matching SHA-256 is how you know the file is the official one.

When you create a wallet, write down its 24 words on paper: they are the only
way to recover it.

Prefer a terminal? The CLI miner for Windows and Linux is in the
zoka-network/zokanetwork release 3.0.4.

Source: https://github.com/zoka-network/zsilent-core

ZSilent Core 2.1.3 — Zoka Quantic · Testnet

ZSilent Core 2.1.3 for Windows — Zoka Quantic · Testnet (Zenith).

Explorer fixes. The node inside is still 2.1.2 (the same zoka.exe,
SHA-256 74c95b7df32f8fa28c16a547e895cc9d36925309e20d140ff2b0dd33d5223e33), so
the chain, the activation heights (25,570 and 25,630) and the protocol do not
change.

• Latest blocks: the Explorer lists the last 8 blocks your node holds, with
  time, hash and transaction counts; click one to open it. It used to list
  heights computed from the tip, with no data and nothing to open.
• Private transactions with their block: searching a private transaction
  hash shows its status and the block that holds it, when your node keeps its
  body (it does for the ones you sent).
• No more zokascan.cc: the Explorer buttons next to a sent transaction and
  in the activity list opened zokascan.cc, which has shown no data since its
  servers were shut down in July 2026. They now open the built-in Explorer,
  which only asks your own node.

SHA-256:

3ce744b0b97da92afe65e3b9933e2b2c9f8bf27c78f220913cf8777d9d342cfb  ZSilent Core-2.1.3.msi

GitHub lists the installer as ZSilent.Core-2.1.3.msi (it replaces the space); it is the same file.