Skip to content

WanderTrace 2.4.3 — Pace preview and motion variation

Latest

Choose a tag to compare

@zsnmsl zsnmsl released this 30 Oct 13:20

WanderTrace 2.4.3 — Pace preview and motion variation

English

  • Show live pace in minutes/seconds per kilometre beside the speed field. For example, 3 m/s → 5′33″/km. Profile, speed, and randomization edits update the readout immediately.
  • Show the reference pace range corresponding to the selected speed variation.
  • Replace the repeating 640-second speed table with session-seeded, multiscale linear variation. Distance is integrated from the same curve; kilometre splits vary naturally rather than being forced to differ.
  • Default new configurations to 10% speed variation. Existing saved 0% values keep constant-speed behavior; the selectable range remains 0–50%.
  • Replace four-second straight-line GPS offsets with correlated slow drift and smaller short-term variation, smoothly interpolated within the configured 1–3 metre radius.
  • Keep zero-start-time route previews at the starting point and include the session seed in braking-cache identity.
  • Include daily commit tooling, an owner-operated release publishing script, version-specific release notes, and workflow documentation.

Validation during development: 66 Android unit tests passed, standalone route-engine checks passed, and Lint reported no errors. Pace UI updates, speed/distance consistency, varied kilometre splits, constant-speed compatibility, and drift bounds/continuity were checked locally. GPS behavior and 云运动 compatibility were not physically verified for this revision; the drift is a synthetic model, not a calibrated receiver model.

The native library is byte-identical to 2.4.2. This release does not remove 2.4.2's native loading conditions or existing sensor coverage limitations. Stop simulation before updating and start a new route afterward so an active trajectory is not reinterpreted midway through the new motion model.

The APK is a non-debuggable Release build signed with the project's existing local development certificate. Package: com.wandertrace; versionCode: 13; versionName: 2.4.3-pace.

简体中文

  • 速度输入旁实时显示分 / 公里配速,例如 3 m/s 对应 5分33秒 / 公里;修改速度、出行预设或随机幅度会同步更新。
  • 显示所选速度随机幅度对应的参考配速范围。
  • 移除固定 640 秒重复速度表,改为按本次运行生成的多时间尺度线性变化;距离按同一速度曲线积分,公里配速自然浮动,不强制每公里都不同。
  • 新配置默认 10% 速度随机,已有路线保存的 0% 仍代表匀速,可选范围仍为 0–50%。
  • GPS 偏移改为慢漂移叠加小幅短期变化,在设定的 1–3 米半径内平滑过渡。
  • 未设置开始时间的路线预览保持在起点,刹停缓存按本次运行区分。
  • 补充日常提交脚本、一键发布脚本、分版本更新说明及使用文档。

开发阶段通过 66 项 Android 单元测试和独立路线引擎检查,Lint 无错误;检查覆盖配速联动、速度与距离积分、公里用时变化、匀速兼容及漂移边界 / 连续性。尚未进行 GPS 效果或云运动兼容性的真机验证;GPS 漂移属于合成模型。

原生库与 2.4.2 完全一致,不改变上一版原生库的加载条件及传感器覆盖限制。建议升级前停止模拟,安装后重新开始路线,避免运行中的轨迹因模型变化而发生跳变。

安装包为不可调试的 Release 构建,沿用项目现有的本地开发证书签名。包名 com.wandertrace,版本号 13,版本名称 2.4.3-pace。

日本語

  • 速度入力の横に分/km のペースを表示します。3 m/s は約 5分33秒/km です。速度・プリセット・変動幅の変更に追従します。
  • 固定の 640 秒テーブルを廃止し、セッションごとの線形速度変化と整合する距離積分を使用します。
  • 新規設定の速度変動は既定で 10% です。保存済みの 0% は等速のままです。
  • 1–3 メートルの半径内で、緩やかな GPS ドリフトと小さな短期変動を組み合わせます。
  • 日常コミットと Release 公開のスクリプト、およびバージョン別の変更説明を追加します。

66 件の Android ユニットテストとローカルのルート計算チェックを通過しています。実機での GPS 動作や云运动との互換性は未検証です。ネイティブライブラリは 2.4.2 と同一であり、同版の読み込み条件は変わりません。更新前にシミュレーションを停止し、更新後に新しいルート実行を開始してください。