x3dash_v1.2.7-BETA

New

• Buttons always available: a new switch in App settings, under DASH, on by default. With it on, the dash works as before. With it off, a shrinking dash gives up the buttons first, then the chips, then the tiles, and the tile pages never hold a button.

Fixed

• Firmware detection: newer firmware releases are now recognized automatically, with no app update needed.
• Profiles: a profile's sheet in Scooter settings now lists and counts only the settings marked with a dot, which are the ones Apply writes. Other saved values are kept and come back if you mark that setting again.

Changed

• Clear maintenance reminder no longer carries the UNVERIFIED tag, now that it has cleared a live reminder on a ZT3.

x3dash_v1.2.4-BETA

1.2.4-BETA

• Dashboard settings: a value placed on the dash that your scooter no
  longer reports can now be taken off its row. It was stuck there before.

x3dash_v1.2.3-BETA

REC samples faster

While REC runs, x3dash now reads the controller's live readings every 250 ms, four times a second, where it used to read them once a second. An event shorter than a second can no longer fall between two samples: the file shows how long it lasted and what the throttle did meanwhile. With REC off, the dash keeps its usual rate.

Tested on a 94-minute ride: about four reads a second throughout, with no gaps in the file.

x3dash_v1.2.2-BETA

x3dash 1.2.2-BETA

Trip graph: any field on either trace

Hold the blue or the orange button under the trip graph for 1 second
to choose what that trace draws: speed, power, current, voltage,
battery, remaining range, temperature, trip distance or motor
temperature.
A bar fills along the top of the button while you hold. A short tap
still shows or hides the trace, as before.
Every field is recorded from the start of the trip, so the one you
pick draws the whole ride at once.
Each field has its own scale and unit. The buttons show the field's
code and its range.
The graph starts on speed and power each time the dash opens.
Notes

Motor temperature only draws on a VCU that reports it. On a stock
VCU it stays empty.

On a Paper dash the brake and throttle curve pane drew a black plot and
night greys, so the reading, − and + looked disabled and ✕/✓ always
looked live. The editor now reads DashPalette: Paper's white plot with
its hairline frame and Paper's colours; with no scope (SHFW settings)
and on the night dash it draws exactly as before.

x3dash_v1.1.18-BETA

x3dash 1.1.18-BETA

Fixed
• REC: a ride file no longer has half-empty rows after you leave the dash and come back while recording. Those rows showed as NaN in a ride viewer. Now, after you return, the file waits up to 10 s for every reading to come back. A reading that stops answering is left empty from then on, and recording carries on.

x3utils GUI v2.1.10-BETA

A fix release for the desktop apps: Cancel now works during Power-race.

Fixed

• Power-race: Cancel works again. On 2.1.9 the window could freeze
  while the race kept missing, and Cancel didn't respond until the
  scooter was caught. It now stops on the first click, with or without
  an ST-Link plugged in.
• The window stays responsive in every connection mode (Default SWD,
  C45 Clone, C45 Genuine, Power-race), including during long Backups and
  Flashes. Speed and catch rate are unchanged.

Tested

• Windows: all four connection modes, Check, Backup and Backup + Flash.
• Linux, macOS and Android: passed.

x3utils CLI v1.8.3

SHU compatible flashing has been removed from the CLI.

What's changed

• Removed Flash SHU Compatible, its script and the compat folder on Windows, Linux and macOS.
• The Advanced menu is now: 1 Flash Only, 2 Check Protection, 3 Unlock / Rescue, 4 Back.
• Linux and macOS no longer need Python.

Existing dumps in your old compat folder are not touched; keep them, they are your original firmware backups.