Repository navigation
v3.3.1
充电上限 3.3.1
这一版让装新版本、重新打开和退出都更省事。
变化
- 装完自己打开。 用 PKG 装完会自己打开软件。旧版本还开着的话,它会在十几秒内自己退出、带着窗口打开新版本,顶上写着「已经更新到 3.3.1」。
- 重新打开和退出。 窗口右上角齿轮旁边多了一个电源按钮,可以「重新打开充电上限」或「退出充电上限」。右键菜单栏图标里也加了「重新打开」。
- 放电帮手旧了会提醒。 用 DMG 覆盖安装后放电帮手还是旧版本时,主窗口里会提示,点「安装放电帮手」就能换成新的。
- 小修正。 一直充满模式下,右键菜单里的「临时充满到 100%」会变灰;繁體中文的「退出」改成「結束」。
升级
直接覆盖安装即可,设置保留。用 PKG 安装会自己换掉放电帮手;用 DMG 的话,装好后窗口里会提示重新装一次放电帮手,装好之前充电上限照样生效,放电和低电量模式要等装好才会用。
繁體中文
Charge Limit 3.3.1 讓安裝新版本、重新開啟和結束都更省事。
變化
- 裝完自己打開。 用 PKG 裝完會自己打開軟體。舊版本還開著的話,它會在十幾秒內自己結束、帶著視窗打開新版本,頂端寫著「已經更新到 3.3.1」。
- 重新開啟和結束。 視窗右上角齒輪旁邊多了一個電源按鈕,可以「重新開啟充電上限」或「結束充電上限」。右鍵選單列圖示裡也加了「重新開啟」。
- 放電幫手舊了會提醒。 用 DMG 覆蓋安裝後放電幫手還是舊版本時,主視窗裡會提示,點「安裝放電幫手」就能換成新的。
- 小修正。 一直充滿模式下,右鍵選單裡的「臨時充滿到 100%」會變灰;「退出」改成「結束」。
升級
直接覆蓋安裝即可,設定保留。用 PKG 安裝會自己換掉放電幫手;用 DMG 的話,裝好後視窗裡會提示重新裝一次放電幫手,裝好之前充電上限照樣生效,放電和低電量模式要等裝好才會用。
English
Charge Limit 3.3.1 makes installing updates, restarting and quitting less fiddly.
Changes
- Opens itself after installing. The PKG opens the app when it's done. If the old version is still running, it quits within about fifteen seconds and reopens the new one with its window showing and "Updated to 3.3.1" at the top.
- Restart and quit. There's a power button next to the gear in the top-right corner of the window, with "Restart Charge Limit" and "Quit Charge Limit". Restart is in the menu bar icon's right-click menu too.
- Outdated helper reminder. If you install with the DMG and the discharge helper is still the old version, the main window tells you, and "Install discharge helper" swaps in the new one.
- Small fixes. In Always full, "Top up to 100%" in the right-click menu is now greyed out.
Upgrading
Install over the existing app and your settings are kept. The PKG replaces the discharge helper for you. With the DMG, the window will ask you to reinstall the discharge helper; the charge limit keeps working until then, while discharging and Low Power Mode wait for the reinstall.