Repository navigation
Releases
Roch CPU 1.0.7
Roch CPU 1.0.7 is the first release built from the Rust source. It adds Dragon Power-style per-core ratios and VDDQ above 1.435 V, and fixes a voltage-offset bug that could freeze the system.
Changes
- Rust rewrite: a single native executable with no .NET runtime. Diagnostics, hardware layer and window were ported from the C# version, and every port was reviewed against the original.
- Per-core ratios: the Per-Core Ratio window sets each P-core's own ratio and each E-core cluster's ratio (E-cores share one clock per cluster of four), the way MSI Dragon Power's Per Core Ratio does. The active-core turbo-table editor is removed.
- Ratio changes reach every core: CPU and E-core ratios now set the CPU's per-core ratio ceiling on every core and cluster. The E-core ratio works with E-cores enabled or disabled. A failed change rolls back the table, the core ratio and every per-core limit.
- DDR5 VDDQ above 1.435 V on PMIC ID 8A12 kits, through the same register extension Dragon Power uses. DIMM VDD/VDDQ limits match Dragon Power (0.800-2.500 V, within the PMIC's own maximum).
- Fixed: a voltage offset could switch an override rail to Auto. On a BIOS that sets SA or Core in override mode, an offset silently made the rail adaptive, which froze the test system with overclocked DDR5. Offsets are now refused in override mode, and restoring a voltage returns the BIOS override.
- Fixed: a VDD write could raise VDDQ on 8A12 kits. Also fixed: an occasional DIMM marked read-only after one missed ADC read, the CPU VDD2 restore reporting a stale value, and
--intel-audit/--windows-auditcrashing. - Safer hardware timing: embedded-controller and SMBus polling waits at least 8 ms per poll again, as the .NET build did.
- Interface: header values in red, no live readout line, no Ring Voltage or CPU AUX rows, no GT rows on F processors, no confirmation prompts on voltages, a steady Base Clock box, the window fits the monitor's work area, and the X link points to @1xroch. AMD PPT/TDC/EDC/Tctl rows show their limits without the live draw.
- Diagnostics:
--applytakes several row/value pairs;--probelists every core's ratio limit and the E-core clusters.
Download
Download Roch-CPU-1.0.7-win-x64.zip, extract the entire folder, and run Roch CPU.exe as administrator. No runtime is needed. Keep the bundled driver and pawnio folder beside the executable. SHA256SUMS.txt contains the archive checksum.
Validation and limitations
- The published source passed 198 regression checks (simulated drivers) and GitHub CI.
- Tested on hardware: Intel Core i5-14600KF / MSI Z790MPOWER (P-core, per-core, E-core and ring ratios, base clock, Core/SA/VDD2 voltages, DDR5 VDD/VDDQ/VPP including the VDDQ extension, PL1/PL2) and an AMD Ryzen system.
- A ratio the BIOS caps cannot be raised from Windows (x54 on the tested board, in Dragon Power too). Read-back does not establish tuning stability.
- Controls depend on processor, board, BIOS and driver support. Optional PawnIO and compatible ASUS control services remain separate installations.
Source: 0dff900.
Roch CPU 1.0.6
Roch CPU 1.0.6 updates the shared Roch interface, DDR5 voltage controls, and Intel voltage target display.
Changes
- Refine the compact light/dark layout, buttons, and sun/moon theme control to match the shared Roch style.
- Default DDR5 controls to Sync, with shared VDD/VDDQ/VPP targets. Split retains per-DIMM editing; changes remain staged until Apply. Cached PMIC measurement details are available in tooltips.
- Keep editable voltage targets separate from telemetry. Ring displays Auto when no explicit target is encoded, and acquisition failures display Not read; live VID and measured Vcore remain separate header readings.
- Cache the bounded MSI core-regulator startup probe, restore its original page, and improve startup diagnostics and paired regulator/mailbox rollback coverage.
- Add a hardware-free UI preview and fake-driver/exact-build regression tests.
Download
Download Roch-CPU-1.0.6-win-x64.zip, extract the entire folder, and run Roch CPU.exe as administrator. This self-contained Windows x64 package includes the .NET runtime and required support files. SHA256SUMS.txt contains the archive checksum.
Validation and limitations
- The published source passed 36 repository regression checks and GitHub CI; 134 targeted cases also passed locally.
- Manual launch was confirmed. Hardware tuning writes were not tested for this release, and readback does not establish tuning stability.
- Controls depend on processor, board, BIOS, and driver support. Optional PawnIO and compatible ASUS control services remain separate installations.
Source: b2e56ab.
Roch CPU 1.0.5
Roch CPU 1.0.5 adds live AMD power readings, the AGESA version and a measured base clock, in a smaller window that opens in light mode.
Changes
- AMD: each power limit row shows what the CPU is drawing right now (PPT watts, TDC and EDC amps, temperature), read from the SMU power table through PawnIO.
- AMD: when PawnIO is not installed, the Power section says why PPT/TDC/EDC/Thermal Limit show Auto and links to pawnio.eu.
- AMD: Base Clock shows the measured BCLK instead of Auto. It remains read-only.
- The header shows the AGESA version on AMD, from the firmware's SMBIOS information.
- Light mode is the default. The theme toggle is a sun/moon button next to minimize, and the title bar matches the window.
- A narrower, tighter window. Allowed ranges moved into each row's tooltip, and the blank line under the footer links is gone.
Download
Download Roch-CPU-1.0.5-win-x64.zip, extract the entire folder, and run Roch CPU.exe as administrator. This self-contained Windows x64 package includes the .NET runtime and required support files.
Validation and limitations
- All 34 regression checks and the GitHub Actions build passed.
- Live readings need PawnIO, installed separately. It is not bundled or installed by this release.
- AMD BCLK / eCLK writing is not supported. No Windows-accessible clock-generator interface has been verified on AM5.
- Readback verifies the requested setting, not overclock stability. Actual voltage can differ from the target.
Roch CPU 1.0.4
Roch CPU 1.0.4 improves Intel tuning on ASUS Z790 while preserving the existing MSI control paths.
Changes
- Fix P-core, E-core and ring ratio writes and verify retained settings.
- Add ASUS controls for CPU Core, System Agent, E-core L2 and Ring/Cache SVID voltage, with complete state readback and rollback on failure.
- Show requested CPU voltage separately from measured Vcore. Ring is labelled as a target because it shares the core supply.
- Remove the CPU VRM offset control and incorrectly mapped VDD2/AUX readings on ASUS DDR4 boards.
- Improve driver, firmware and Windows restriction diagnostics, plus error reporting for rejected writes.
Download
Download Roch-CPU-1.0.4-win-x64.zip, extract the entire folder, and run Roch CPU.exe as administrator. This self-contained Windows x64 package includes the .NET runtime and required support files.
Validation and limitations
- All 34 regression checks and the GitHub Actions build passed.
- ASUS voltage controls require the compatible ASUS control service already installed. It is not bundled or installed by this release.
- ASUS BCLK remains read-only: vendor target readback did not produce a verified physical clock change.
- Readback verifies the requested setting, not overclock stability. Actual voltage can differ from the target.
See the validation notes for test results.
Roch CPU 1.0.3
Highlights:
- CPU Core Voltage now updates the Renesas regulator and Intel OC mailbox together, with read-back, rollback protection, and measured Vcore verification.
- Adaptive Ring Voltage shows the real shared IA/core-rail value instead of Auto.
- CPU header now uses labeled fields, shows microcode, and formats cores / threads as requested.
- Removed the Revert button and updated the Intel screenshot and documentation.
- CPU E-Core L2 displays its programmed voltage target when present.
Download and extract Roch-CPU-1.0.3-win-x64.zip, then run Roch CPU.exe as administrator. Keep all files together. This self-contained x64 package needs no separate .NET runtime.
Roch CPU 1.0.2
Roch CPU 1.0.2 adds the shared YouTube | X | Discord footer and updated documentation, with .NET 10 builds and the compact CPU/memory tuning layout.
Download and extract Roch-CPU-1.0.2-win-x64.zip, then run Roch CPU.exe as administrator. Keep all driver and support files together. This self-contained x64 package needs no separate .NET runtime.
Controls depend on CPU, motherboard, BIOS and driver support. Optional PawnIO enables supported AMD power-table reads. Overclocking can cause instability or data loss.
Validation: Release publish succeeded; footer visually verified.
Roch CPU 1.0.1
Base clock and CPU VDD2 are settable now, and applying a change no longer freezes the window.
Base clock and CPU VDD2 — MSI 600/700-series boards
Neither comes from the CPU: one is a synthesiser on the board, the other a voltage regulator, and both sit on an I²C bus the embedded controller owns rather than on the PCH SMBus. Roch CPU reaches them through the mailbox that EC exposes.
- Base clock
- CPU VDD2, clamped to 1.100–1.450 V, where the raw byte reaches past 3 V and would take the memory controller with it
A wrong value on either does not produce a wrong reading, it stops the machine — so nothing is computed from an assumed zero point, the target is approached in small steps, and every step is measured: base clock against the ACPI timer, which does not move with it, VDD2 at the board. Anything that lands off target puts back the value found at start-up and stops.
There is no ceiling on base clock. Where a board gives up depends on the memory, the cache ratio and how far the CPU is already pushed, and only the person at the machine knows it. Base clock scales the memory controller, the ring and the PCIe/DMI reference together, so a little goes a long way and past a point the machine simply stops; above 105 MHz the window asks for confirmation, which stops a typo rather than a decision. The real limit is that a reading the meter cannot confirm is treated as a fault and rolled back, because past that point there is no way to know a write landed.
Read-only on other boards, as before.
Also in this release
- Apply and Reset run off the UI thread, so the window stays live while a change is measured
- Voltage rows re-read as the window refreshes; a single bad read at launch no longer sits on screen for the life of the process
- Fixed: the E-core L2 row could show Auto while that domain was in fact holding an override
- Fixed: the title bar's close and minimise buttons were being drawn with no glyph at all, so they were invisible
--helplists the diagnostic switches. The EC probes that could hang the board are gone, along with the base-clock diagnostics written against a reading of the EC that turned out to be wrong- Shorter README, and the archives now carry
LICENSEandTHIRD-PARTY-NOTICES.md
Downloads
RochCPU-1.0.1-win-x64.zipneeds the .NET 8 Desktop RuntimeRochCPU-1.0.1-win-x64-selfcontained.zipruns without it
Run as administrator. Windows Memory Integrity (Core Isolation) or the vulnerable-driver blocklist can refuse the WinRing0 driver; the window says so when that happens.
Roch CPU 1.0.0
Roch CPU 1.0.0: board-independent CPU and memory tuning for Intel LGA1700 and AMD Ryzen. One dark window, typeable values, a log.
Intel (12th / 13th / 14th Gen, any 600/700-series board)
- CPU / E-core / ring ratios, the per-active-core turbo table, PL1 / PL2
- Core, E-core L2, ring, SA and GT voltage offsets and overrides through the OC mailbox, checked against the real Vcore the Super I/O measures
- DDR5 VDD / VDDQ / VPP on each DIMM's PMIC, calibrated against the PMIC's own ADC
AMD Ryzen (Zen 2 to Zen 5, AM4 / AM5)
- PPT, TDC, EDC and the thermal limit through the SMU mailbox
- PBO scalar, Curve Optimizer (all cores, plus a per-core window with read-back from the SMU), FMax
- PPT / TDC / EDC read back from the SMU power table when PawnIO is installed (the bundled WinRing0 cannot read it); otherwise the rows start as Auto and show what you wrote
- DDR5 VDD / VDDQ / VPP over the FCH SMBus, same calibration and safety as on Intel
- Validated on an MSI B850MPOWER with a Ryzen 7 9850X3D; the Zen 5 table layout, the stock-limit messages and the 10 mV VDDQ step on G.Skill kits were measured there
Downloads
RochCPU-1.0.0-win-x64.zipneeds the .NET 8 Desktop RuntimeRochCPU-1.0.0-win-x64-selfcontained.zipruns without it
Run as administrator. Windows Memory Integrity (Core Isolation) can refuse the WinRing0 driver; the window says so.
The AMD path was written with Ivan Rusanov's ZenStates-Core as the reference for SMU mailboxes and message numbers; see THIRD-PARTY-NOTICES.md.