Skip to content

Roch CPU 1.0.7

Latest

Choose a tag to compare

@1xroch 1xroch released this 11 Nov 16:53

Roch CPU 1.0.7 is the first release built from the Rust source. It adds Dragon Power-style per-core ratios and VDDQ above 1.435 V, and fixes a voltage-offset bug that could freeze the system.

Changes

  • Rust rewrite: a single native executable with no .NET runtime. Diagnostics, hardware layer and window were ported from the C# version, and every port was reviewed against the original.
  • Per-core ratios: the Per-Core Ratio window sets each P-core's own ratio and each E-core cluster's ratio (E-cores share one clock per cluster of four), the way MSI Dragon Power's Per Core Ratio does. The active-core turbo-table editor is removed.
  • Ratio changes reach every core: CPU and E-core ratios now set the CPU's per-core ratio ceiling on every core and cluster. The E-core ratio works with E-cores enabled or disabled. A failed change rolls back the table, the core ratio and every per-core limit.
  • DDR5 VDDQ above 1.435 V on PMIC ID 8A12 kits, through the same register extension Dragon Power uses. DIMM VDD/VDDQ limits match Dragon Power (0.800-2.500 V, within the PMIC's own maximum).
  • Fixed: a voltage offset could switch an override rail to Auto. On a BIOS that sets SA or Core in override mode, an offset silently made the rail adaptive, which froze the test system with overclocked DDR5. Offsets are now refused in override mode, and restoring a voltage returns the BIOS override.
  • Fixed: a VDD write could raise VDDQ on 8A12 kits. Also fixed: an occasional DIMM marked read-only after one missed ADC read, the CPU VDD2 restore reporting a stale value, and --intel-audit / --windows-audit crashing.
  • Safer hardware timing: embedded-controller and SMBus polling waits at least 8 ms per poll again, as the .NET build did.
  • Interface: header values in red, no live readout line, no Ring Voltage or CPU AUX rows, no GT rows on F processors, no confirmation prompts on voltages, a steady Base Clock box, the window fits the monitor's work area, and the X link points to @1xroch. AMD PPT/TDC/EDC/Tctl rows show their limits without the live draw.
  • Diagnostics: --apply takes several row/value pairs; --probe lists every core's ratio limit and the E-core clusters.

Download

Download Roch-CPU-1.0.7-win-x64.zip, extract the entire folder, and run Roch CPU.exe as administrator. No runtime is needed. Keep the bundled driver and pawnio folder beside the executable. SHA256SUMS.txt contains the archive checksum.

Validation and limitations

  • The published source passed 198 regression checks (simulated drivers) and GitHub CI.
  • Tested on hardware: Intel Core i5-14600KF / MSI Z790MPOWER (P-core, per-core, E-core and ring ratios, base clock, Core/SA/VDD2 voltages, DDR5 VDD/VDDQ/VPP including the VDDQ extension, PL1/PL2) and an AMD Ryzen system.
  • A ratio the BIOS caps cannot be raised from Windows (x54 on the tested board, in Dragon Power too). Read-back does not establish tuning stability.
  • Controls depend on processor, board, BIOS and driver support. Optional PawnIO and compatible ASUS control services remain separate installations.

Source: 0dff900.