macos 应用主界面不显示

[inpure]

打开 v2rayn 的时候，主界面闪一下就没了，猜测是需要什么权限么？

[inpure]

补充说明一下：应用还是在后台运行的，只是主界面无法显示

[2dust]

截个图看看，没有明白无法显示界面

[inpure]

就是这样点了之后什么反应都没有，有查看程序运行日志的方法么？我可以把日志贴上来

[2dust]

是否被锁定 dock ，都不行重装一次吧

[inpure]

没有锁定 dock，已重装过应用了，还是会反复出现，只有重启系统才会恢复正常一段时间

另外还观察到一个现象，当主界面进不去的时候，状态烂上的小图标也消失找不到了

正常的时候，点击 dock 上的应用图标也打不开主界面，只有通过状态栏小图标才能进入主界面

系统内存压力在 50% 以下，已排除是后台应用过多内存不足导致 v2rayn 主界面退出的原因

[inpure]

再补充一点，点击 dock 应用图标的时候，如果是在其他全屏应用的桌面，系统会有一个切换到主桌面的动作，但不显示应用界面

猜测应用的“显示与隐藏主界面”的逻辑是否有不完善的地方

[2dust]

~/Library/Application Support/v2rayN 你打开数据存储目录，然后看下 guilogs 中是否有日志吧。
之前先提供系统版本和 v2rayN 版本信息

[inpure]

macOS: 15.7.2 arm
v2rayN: v7.15.7、v7.16.3 （两个版本都存在同样的问题）

2025-11-21 00:07:33.8883-INFO OnClosing -> WindowClosing
2025-11-21 00:51:11.4069-INFO OnClosing -> ApplicationShutdown
2025-11-21 00:51:11.4279-INFO AppExitAsync Begin
2025-11-21 00:51:11.4609-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/binConfigs/proxy_set_osx_sh.sh
2025-11-21 09:27:45.7051-INFO v2rayN start up | v2rayN - V7.15.7 - Arm64 | /Users/fly/Library/Application Support/v2rayN | /Applications/v2rayN.app/Contents/MacOS/v2rayN | Unix 15.7.2
2025-11-21 09:27:46.8138-INFO Successfully set the file execution permission, /Applications/v2rayN.app/Contents/MacOS/AmazTool
2025-11-21 09:27:46.8138-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/xray/xray
2025-11-21 09:27:46.8138-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/mihomo/mihomo
2025-11-21 09:27:46.8138-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/sing_box/sing-box
2025-11-21 09:27:46.8152-INFO Setup Scheduled Tasks
2025-11-21 10:21:54.0584-INFO OnClosing -> ApplicationShutdown
2025-11-21 10:21:54.0616-INFO AppExitAsync Begin
2025-11-21 10:22:01.3278-INFO v2rayN start up | v2rayN - V7.15.7 - Arm64 | /Users/fly/Library/Application Support/v2rayN | /Applications/v2rayN.app/Contents/MacOS/v2rayN | Unix 15.7.2
2025-11-21 10:22:02.1123-INFO Successfully set the file execution permission, /Applications/v2rayN.app/Contents/MacOS/AmazTool
2025-11-21 10:22:02.1123-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/xray/xray
2025-11-21 10:22:02.1123-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/mihomo/mihomo
2025-11-21 10:22:02.1123-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/sing_box/sing-box
2025-11-21 10:22:02.1137-INFO Setup Scheduled Tasks
2025-11-21 10:23:42.7923-INFO OnClosing -> ApplicationShutdown
2025-11-21 10:23:42.7942-INFO AppExitAsync Begin
2025-11-21 10:38:14.1519-INFO v2rayN start up | v2rayN - V7.16.3 - Arm64 | /Users/fly/Library/Application Support/v2rayN | /Applications/v2rayN.app/Contents/MacOS/v2rayN | Unix 15.7.2
2025-11-21 10:38:15.2142-INFO Successfully set the file execution permission, /Applications/v2rayN.app/Contents/MacOS/AmazTool
2025-11-21 10:38:15.2142-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/xray/xray
2025-11-21 10:38:15.2142-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/mihomo/mihomo
2025-11-21 10:38:15.2142-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/sing_box/sing-box
2025-11-21 10:38:15.2155-INFO Setup Scheduled Tasks
2025-11-21 10:39:04.5378-INFO OnClosing -> ApplicationShutdown
2025-11-21 10:39:04.5398-INFO AppExitAsync Begin
2025-11-21 10:58:24.6771-INFO v2rayN start up | v2rayN - V7.16.3 - Arm64 | /Users/fly/Library/Application Support/v2rayN | /Applications/v2rayN.app/Contents/MacOS/v2rayN | Unix 15.7.2
2025-11-21 10:58:25.9815-INFO Successfully set the file execution permission, /Applications/v2rayN.app/Contents/MacOS/AmazTool
2025-11-21 10:58:25.9816-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/xray/xray
2025-11-21 10:58:25.9816-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/mihomo/mihomo
2025-11-21 10:58:25.9816-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/sing_box/sing-box
2025-11-21 10:58:25.9830-INFO Setup Scheduled Tasks
2025-11-21 11:00:26.8707-DEBUG GetCliWrapOutput,Command execution failed, see the inner exception for details.

Standard error:
/bin/bash: fc-list: command not found
2025-11-21 11:00:26.8765-DEBUG    at CliWrap.Buffered.BufferedCommandExtensions.<>c__DisplayClass0_0.<<ExecuteBufferedAsync>b__0>d.MoveNext() in /_/CliWrap/Buffered/BufferedCommandExtensions.cs:line 65
--- End of stack trace from previous location ---
   at ServiceLib.Common.Utils.GetCliWrapOutput(String filePath, IEnumerable`1 args) in /Users/runner/work/v2rayN/v2rayN/v2rayN/ServiceLib/Common/Utils.cs:line 780
2025-11-21 11:00:26.8765-ERROR CliWrap.Exceptions.CommandExecutionException: Command execution failed because the underlying process (bash#1581) returned a non-zero exit code (127).

Command:
/bin/bash -c "fc-list : family"

You can suppress this validation by calling `WithValidation(CommandResultValidation.None)` on the command.
2025-11-21 11:01:18.1896-DEBUG GetCliWrapOutput,Command execution failed, see the inner exception for details.

Standard error:
/bin/bash: fc-list: command not found
2025-11-21 11:01:18.1896-DEBUG    at CliWrap.Buffered.BufferedCommandExtensions.<>c__DisplayClass0_0.<<ExecuteBufferedAsync>b__0>d.MoveNext() in /_/CliWrap/Buffered/BufferedCommandExtensions.cs:line 65
--- End of stack trace from previous location ---
   at ServiceLib.Common.Utils.GetCliWrapOutput(String filePath, IEnumerable`1 args) in /Users/runner/work/v2rayN/v2rayN/v2rayN/ServiceLib/Common/Utils.cs:line 780
2025-11-21 11:01:18.1896-ERROR CliWrap.Exceptions.CommandExecutionException: Command execution failed because the underlying process (bash#1664) returned a non-zero exit code (127).

Command:
/bin/bash -c "fc-list : family"

You can suppress this validation by calling `WithValidation(CommandResultValidation.None)` on the command.
2025-11-21 11:02:35.6875-DEBUG GetCliWrapOutput,Command execution failed, see the inner exception for details.
...skipping...
2025-11-21 12:44:20.2559-INFO OnClosing -> ApplicationShutdown
2025-11-21 12:44:20.2577-INFO AppExitAsync Begin
2025-11-21 12:44:27.6989-INFO v2rayN start up | v2rayN - V7.16.3 - Arm64 | /Users/fly/Library/Application Support/v2rayN | /Applications/v2rayN.app/Contents/MacOS/v2rayN | Unix 15.7.2
2025-11-21 12:44:28.4813-INFO Successfully set the file execution permission, /Applications/v2rayN.app/Contents/MacOS/AmazTool
2025-11-21 12:44:28.4813-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/xray/xray
2025-11-21 12:44:28.4813-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/mihomo/mihomo
2025-11-21 12:44:28.4817-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/sing_box/sing-box
2025-11-21 12:44:28.4817-INFO Setup Scheduled Tasks
2025-11-21 12:49:54.2823-INFO OnClosing -> ApplicationShutdown
2025-11-21 12:49:54.2857-INFO AppExitAsync Begin
2025-11-21 12:59:00.5032-INFO v2rayN start up | v2rayN - V7.16.3 - Arm64 | /Users/fly/Library/Application Support/v2rayN | /Applications/v2rayN.app/Contents/MacOS/v2rayN | Unix 15.7.2
2025-11-21 12:59:01.2951-INFO Successfully set the file execution permission, /Applications/v2rayN.app/Contents/MacOS/AmazTool
2025-11-21 12:59:01.2951-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/xray/xray
2025-11-21 12:59:01.2951-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/mihomo/mihomo
2025-11-21 12:59:01.2958-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/sing_box/sing-box
2025-11-21 12:59:01.2958-INFO Setup Scheduled Tasks
2025-11-21 16:21:59.1846-INFO OnClosing -> ApplicationShutdown
2025-11-21 16:21:59.1871-INFO AppExitAsync Begin
2025-11-21 16:21:59.2354-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/binConfigs/proxy_set_osx_sh.sh
2025-11-21 16:23:05.6327-INFO v2rayN start up | v2rayN - V7.16.3 - Arm64 | /Users/fly/Library/Application Support/v2rayN | /Applications/v2rayN.app/Contents/MacOS/v2rayN | Unix 15.7.2
2025-11-21 16:23:07.4093-INFO Successfully set the file execution permission, /Applications/v2rayN.app/Contents/MacOS/AmazTool
2025-11-21 16:23:07.4093-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/xray/xray
2025-11-21 16:23:07.4093-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/mihomo/mihomo
2025-11-21 16:23:07.4093-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/sing_box/sing-box
2025-11-21 16:23:07.4112-INFO Setup Scheduled Tasks
2025-11-21 16:23:17.6841-DEBUG GetCliWrapOutput,Command execution failed, see the inner exception for details.

Standard error:
/bin/bash: fc-list: command not found
2025-11-21 16:23:17.6898-DEBUG    at CliWrap.Buffered.BufferedCommandExtensions.<>c__DisplayClass0_0.<<ExecuteBufferedAsync>b__0>d.MoveNext() in /_/CliWrap/Buffered/BufferedCommandExtensions.cs:line 65
--- End of stack trace from previous location ---
   at ServiceLib.Common.Utils.GetCliWrapOutput(String filePath, IEnumerable`1 args) in /Users/runner/work/v2rayN/v2rayN/v2rayN/ServiceLib/Common/Utils.cs:line 780
2025-11-21 16:23:17.6900-ERROR CliWrap.Exceptions.CommandExecutionException: Command execution failed because the underlying process (bash#1022) returned a non-zero exit code (127).

Command:
/bin/bash -c "fc-list : family"

You can suppress this validation by calling `WithValidation(CommandResultValidation.None)` on the command.
2025-11-21 16:23:38.4387-DEBUG GetCliWrapOutput,Command execution failed, see the inner exception for details.

Standard error:

2025-11-21 16:23:38.4387-DEBUG    at CliWrap.Buffered.BufferedCommandExtensions.<>c__DisplayClass0_0.<<ExecuteBufferedAsync>b__0>d.MoveNext() in /_/CliWrap/Buffered/BufferedCommandExtensions.cs:line 65
--- End of stack trace from previous location ---
   at ServiceLib.Common.Utils.GetCliWrapOutput(String filePath, IEnumerable`1 args) in /Users/runner/work/v2rayN/v2rayN/v2rayN/ServiceLib/Common/Utils.cs:line 780
2025-11-21 16:23:38.4387-ERROR CliWrap.Exceptions.CommandExecutionException: Command execution failed because the underlying process (bash#1055) returned a non-zero exit code (143).

Command:
/bin/bash -c "launchctl unload -w \"/Users/fly/Library/LaunchAgents/v2rayN-LaunchAgent.plist\""

You can suppress this validation by calling `WithValidation(CommandResultValidation.None)` on the command.
2025-11-21 16:23:38.9413-INFO v2rayN start up | v2rayN - V7.16.3 - Arm64 | /Users/fly/Library/Application Support/v2rayN | /Applications/v2rayN.app/Contents/MacOS/v2rayN | Unix 15.7.2
2025-11-21 16:23:39.7094-INFO Successfully set the file execution permission, /Applications/v2rayN.app/Contents/MacOS/AmazTool
2025-11-21 16:23:39.7094-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/xray/xray
2025-11-21 16:23:39.7094-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/mihomo/mihomo
2025-11-21 16:23:39.7094-INFO Successfully set the file execution permission, /Users/fly/Library/Application Support/v2rayN/bin/sing_box/sing-box
2025-11-21 16:23:39.7106-INFO Setup Scheduled Tasks
2025-11-21 16:24:00.9415-INFO OnClosing -> WindowClosing
2025-11-21 16:24:31.1533-INFO OnClosing -> WindowClosing
2025-11-21 21:19:45.6821-INFO OnClosing -> WindowClosing
2025-11-21 21:19:53.2496-INFO OnClosing -> WindowClosing

[2dust]

日志里面都是正常的，那只能等你自己解决和其他人是否可以帮忙了，你最好改下标题

[2dust]

对了，你上面的截图为什么没有看到 顶部右边一些应用图标呢？ v2rayN 一般会在这里显示

[inpure]

那个截图没有什么意义就删了
故障时状态栏图标确认不显示