Repository navigation
Sub GHz CC1101
The Cap CC1101+NFC HAT adds a Texas Instruments CC1101 Sub-GHz radio to the CardputerZero. Combined with the cap_flipper_subghz payload, it turns the CZ into a Flipper Zero-like device capable of receiving, decoding, saving, replaying, and brute-forcing Sub-GHz signals.
| Feature | Details |
|---|---|
| Chip | CC1101 (SPI) |
| Frequency Range | 300 – 928 MHz |
| Modulation | OOK (AM) / FSK (FM) |
| TX Power | Up to +12 dBm |
| Protocols | 116 decoders, 41 encoders |
| File Format | Flipper Zero .sub compatible |
The main payload (cap_flipper_subghz) has 8 menu items:
| # | Menu Item | Description |
|---|---|---|
| 1 | Read | Listen and auto-decode signals. Shows protocol name, key, bit count in real-time. Press OK to save. |
| 2 | Read RAW | Record raw IQ pulses to a .sub file. For signals that can't be decoded by known protocols. |
| 3 | Saved | Browse saved .sub files. Replay with selectable repeat count (x1–x20). KEY1: Delete, KEY2: Rename. |
| 4 | Decode .sub | Load and decode a .sub file offline. Shows protocol, key, bit count without needing the radio. |
| 5 | Freq Analyzer | Real-time RSSI display. Scans for active frequencies. Shows peak frequency and signal strength. |
| 6 | Add Manually | Select a protocol, enter a key (hex) and bit count, then transmit. Uses the on-screen keyboard. |
| 7 | Bruteforce | Sequential key bruteforce for a selected protocol. Configurable frequency, delay, and repeat. |
| 8 | Radio Settings | Adjust TX power, default preset, and default frequency. |
| Button | Action |
|---|---|
| OK | Save decoded signal to .sub file |
| UP/DOWN | Scroll decoded signals list |
| LEFT/RIGHT | Change frequency |
| KEY1 | Switch modulation preset (AM270/AM650/FM238/FM476) |
| KEY2 | Toggle signal info display |
| KEY3 | Back to main menu |
| Button | Action |
|---|---|
| OK | Select repeat count and transmit |
| UP/DOWN | Scroll file list |
| KEY1 | Delete selected file |
| KEY2 | Rename selected file |
| KEY3 | Back to main menu |
| Button | Action |
|---|---|
| OK | Select protocol → Enter bit count → Configure → Start |
| UP/DOWN | Navigate config items |
| LEFT/RIGHT | Change values (Frequency, Delay, Repeat) |
| KEY3 | Back / Stop bruteforce |
18 pre-configured frequencies covering all common Sub-GHz bands:
| Frequency | Common Use |
|---|---|
| 300.000 MHz | US garage doors |
| 303.875 MHz | US garage doors |
| 304.250 MHz | US garage doors |
| 310.000 MHz | US security |
| 315.000 MHz | US automotive keyfobs |
| 318.000 MHz | US remotes |
| 390.000 MHz | US gate openers |
| 418.000 MHz | EU remotes |
| 433.075 MHz | EU ISM |
| 433.420 MHz | EU ISM |
| 433.920 MHz | EU ISM (default) |
| 434.420 MHz | EU ISM |
| 434.775 MHz | EU ISM |
| 438.900 MHz | EU ISM |
| 868.350 MHz | EU SRD |
| 868.950 MHz | EU SRD |
| 915.000 MHz | US ISM |
| 925.000 MHz | US ISM |
| Preset | Modulation | Bandwidth / Deviation |
|---|---|---|
| AM270 | OOK | 270 kHz |
| AM650 | OOK | 650 kHz (default) |
| FM238 | 2-FSK | 2.38 kHz deviation |
| FM476 | 2-FSK | 47.6 kHz deviation |
The CC1101 driver uses a hybrid TX approach for maximum compatibility:
-
C Native Binary (
cc1101_tx) — Compiled libgpiod v2,SCHED_FIFOreal-time priority, busy-wait µs precision. Best timing accuracy. -
Python gpiod — Fallback when C binary is not available. Uses
gpiodlibrary for GPIO bitbang. - FIFO Streaming — SPI FIFO-based OOK modulation. Used when GPIO methods are not available.
The TX engine automatically selects the best method available. For multi-frame transmissions (repeat x3, x5, etc.), pulses are expanded with 10ms inter-frame gaps to ensure proper decoding by receivers.
Princeton, CAME, CAME Atomo, CAME Twee, Nice FLO, Nice Flor-S, Chamberlain, Linear, Linear Delta3, MegaCode, Security+ V1, Security+ V2, Hormann, Hormann BiSecur, Faac SLH, Marantec, Marantec 24, Somfy Keytis, Somfy Telis, Doitrand, Beninca ARC, Clemsa, Dickert MAHS, Ditec GOL4, Dooya, Ansonic, Intertechno V3, KingGates Stylo4K, Roger, BETT, Legrand, Mastercode, SMC5326, Jarolift, Elplast
KeeLoq, Honeywell, Honeywell WDB, Hollarm, Magellan, Scher-Khan, StarLine, GangQi, Keyfinder, Power Smart, Revers RB2, Nord Ice
Ford V0–V3, Kia V0–V7, Honda Static, Honda V1–V2, Chrysler V0, Fiat V0–V2, Mazda V0, Mitsubishi V0, Porsche Touareg, PSA, Renault V0, Subaru, VAG, Phoenix V2, Schrader GG4, Unknown Vehicle, Unknown Vehicle PWM
Oregon V1/V2/V3, Acurite 592TXR/5n1/606TX/609TXC/986, LaCrosse TX/TX141, Nexus-TH, Bresser 3ch, Ambient Weather, GT-WT-02/03, Infactory, Kedsum TH, ThermoPro TX4, Solight TE44, Vauno EN8822C, Wendox W6726, Emos E601x, Auriol AHFL/HG0601A, TX 8300
GateTX, Alutech AT-4N, Holtek, Holtek HT12x, Feron, Nero Radio, Nero Sketch, Allstar Firefly, Hay21, iDo
POCSAG, X10, Treadmill37, Acurite (various), Unknown (generic decoders)
All signals are saved in Flipper Zero .sub format for full interoperability:
Filetype: Flipper SubGhz RAW File
Version: 1
Frequency: 433920000
Preset: FuriHalSubGhzPresetOok650Async
Protocol: RAW
RAW_Data: 512 -320 512 -960 ...
Or for decoded protocols:
Filetype: Flipper SubGhz Key File
Version: 1
Frequency: 433920000
Preset: FuriHalSubGhzPresetOok650Async
Protocol: Princeton
Bit: 24
Key: 00 AA BB CC
Files are stored in /root/Raspyjack/loot/CC1101/ and can be transferred to/from a Flipper Zero.
- For best range: Use an external 433 MHz SMA antenna
- Read mode auto-tries all presets until a signal is decoded
- Bruteforce supports configurable delay (10–200ms) and repeat (1–10x) per key
- Frequency Analyzer helps find the frequency before recording
- The
.subfiles are compatible with Flipper Zero — copy them via USB
RaspyJack is for educational and authorized testing only. Use responsibly.
RaspyJack Wiki
Getting Started
Using RaspyJack
Payloads
Built-in Tools
Utilities
Reference
Radio & SDR
NFC & RFID
WebUI
Hardware